Runco Vx 2ix Projector User Manual

Runco VX-2ix Owner’s Operating Manual xi 
1List of Figures
2-1. VX-2ix Front/Bottom/Side View .................................................................................... 5
2-2. VX-2ix Rear Panel.........................................................................................................6
2-3. VX-2ix Remote Control ................................................................................................. 9
3-1. Estimating Throw Distance...

List of Figures
xii Runco VX-2ix Owner’s Operating Manual
Notes: 

Runco VX-2ix Owner’s Operating Manual 1 
1.1 
About This Manual
This Owner’s Manual describes how to install, set up and operate the Runco VX-2ix DLP 
Projector. Throughout this manual, the Runco VX-2ix DLP Projector is referred to simply 
as the “VX-2ix.” 
Target AudienceRunco has prepared this manual to help home theater installers and end users get the 
most out of the VX-2ix. 
Runco has made every effort to ensure that this manual is accurate as of the date it was 
printed. However, because of...

Introduction
2 Runco VX-2ix Owner’s Operating Manual
Graphic Conventions: These symbols appear in numerous places throughout the 
manual, to emphasize points that you must keep in mind to avoid problems with your 
equipment or injury: 
1.2 
Using This Manual
Use the following table to locate the specific information you need in this manual. 
TIPS highlight time-saving short cuts and helpful guidelines for using 
certain features. 
NOTES emphasize text with unusual importance or special 
significance....

Introduction
Runco VX-2ix Owner’s Operating Manual 3 
1.3 
Description, Features 
and Benefits
Runco steps into the future once again with the Video Xtreme™ VX-2ix Digital Light 
Processing (DLP™) Projector, one of the world’s first THX® Certified, high-definition home 
theater projectors.
The VX-2ix optical light engine utilizes three, 16:9 SuperOnyx™ Digital Micromirror 
Device™ (DMD™) chips featuring 1280 x 720, high-definition resolution and 12-degree 
mirror tilt for unsurpassed black level...

Introduction
4 Runco VX-2ix Owner’s Operating Manual
Key Features and BenefitsThe VX-2ix offers these key features and benefits: 
 Native Resolution: 1280 x 720 (16:9 Native Aspect Ratio) 
 Three-chip Digital Light Processing (DLP™) system 
 Two DVI Inputs with High-bandwidth Digital Content Protection (HDCP)
 HDTV Compatible 
CinOptx™ Proteus lens options for stunning sharpness and throw distance flexibility
Parts ListYour VX-2ix is shipped with the following items. If any items are missing or...

Runco VX-2ix Owner’s Operating Manual 5 
2.1 
VX-2ix at a Glance
Figure 2-1 shows the key VX-2ix components. 
Figure 2-1. VX-2ix Front/Bottom/Side View
1.INTAKE VENT
2.LENS
3.RUNCO LOGO 
The logo can be rotated to match the projector orientation: inverted (ceiling-mounted) 
or upright. To rotate the logo, grip it at the sides, pull it away from the projector and 
rotate it 180 degrees. 
4.EXHAUST VENT
5.CABLE OPENINGS 
Pass cables through these openings. 
6.IR SENSOR
2. Controls and Functions
23
4 551
6 

Controls and Functions
6 Runco VX-2ix Owner’s Operating Manual
2.2 
VX-2ix Rear Panel
Figure 2-2 shows the VX-2ix rear panel. 
Figure 2-2. VX-2ix Rear Panel
1.DVI 1 / DVI 2 (Digital) 
Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner 
with a DVI or HDMI output.
2.COMPONENT VIDEO (RCA connectors) 
Standard Definition (480i/576i) Component (YPrPb) input. This is the input for 
component video from sources such as DVD players.
3.HD1 / HD2 (Analog BNC connectors) 
Two inputs...

Controls and Functions
Runco VX-2ix Owner’s Operating Manual 7 
5.12-VOLT (750 mA) TRIGGER OUTPUTS  
Connection for up to three (3), 12-volt trigger-controlled devices. These can be 
retractable screens, screen masks or the Runco CineWide with AutoScope system. 
6.S-VIDEO 1 / S-VIDEO 2 
Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super 
VHS (S-VHS) VCR. 
7.IR 
Wired input from an external remote control or infrared receiver. It is a 3.5-mm, mini 
phono jack, wired as...

Controls and Functions
8 Runco VX-2ix Owner’s Operating Manual
14.RIGHT BUTTON 
Used to direct-select inputs or move the menu cursor right in the On Screen Display. 
When no menus are present on-screen, the RIGHT button toggles you through the 
different sources, in this order: 
 
Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - DVI 1 
- DVI
 2
15.MENU BUTTON  
Pressing the MENU button brings up the main menu. Also, if you are in an adjustment 
mode or function, pressing MENU...