Runco Television XP-65 User Manual

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 47 
PREL
IMINARY
Weekly Command Timer: You can program the CinemaWall to perform a series of 
actions at specific times of the day and days of the week. To do this, you create 
command sequences or “programs” consisting of a series of up to 64 individual 
commands. You can create up to seven such programs and specify when they are 
executed.
For example, you can store the following command sequence as a program:
1. 8:00 - Power On
2. 8:01 -...

Operation
48 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
Program Edit: To edit the seven timer programs, press  or  repeatedly to highlight 
Program Edit and press the ACTION () button. Then, proceed as follows:
aProgram: Press  or  to select a 
program to edit.  
b To define the first command in the 
program, press 
 to select “01” and 
press the ACTION () button. 
 
 
 
c Press  to select “Time.”
d Press  or  to change the time of day 
at which you want the CinemaWall to 
execute...

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 49 
PREL
IMINARY
Initial VOL level: Select Initial VOL level from the OPTIONS menu to set the desired 
sound volume level upon power-up. 
Press  or  to set it to On, then use the VOL- or VOL+ () button to set the desired 
initial volume level. When you do, the volume changes so you can preview your selection 
before exiting the menu. 
 
Maximum VOL level: Select Maximum VOL level from the OPTIONS menu to prevent 
the sound volume from being...

Operation
50 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
Initial Power Mode: Select Initial Power Mode from the OPTIONS menu to control how 
the CinemaWall recovers from a power interruption (resulting either from a power failure or 
from being unplugged, then plugged back in):
Normal: The CinemaWall returns to whatever power-on state it was in before the 
power interruption.
Standby: The CinemaWall comes on in standby mode. The power indicator lights red 
or orange. 
On: The...

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 51 
PREL
IMINARY
Power On Screen Delay: In a large video wall installation, it may be advisable to turn the 
displays on one at a time rather than all at once, so as not to overload the power source. 
To make this easier, you can set the CinemaWall to wait up to 30 seconds after you press 
the POWER button to turn itself on. To do this, select 
Power On Screen Delay from the 
OPTIONS menu. Select from 1 to 30 seconds of delay. For example, in...

Operation
52 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
Notes: 

CinemaWall XP-50/XP-65 Installation/Operation Manual 53 
PREL
IMINARY
5.1 
Cleaning
Regular cleaning will extend the life and performance of the CinemaWall. Before cleaning, 
be sure to unplug the power cord from the power outlet.
Cleaning the Display 
Panel Body and Remote 
Control
Do not under any circumstances use solvents such as benzene or thinner to clean the 
CinemaWall. Doing so may cause deterioration or peeling of paint from the display or 
remote control unit.
Wipe the display and remote...

Maintenance and Troubleshooting
54 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
5.2 
Troubleshooting Tips
Table 5-1 provides some general guidelines for troubleshooting problems you may 
encounter with the CinemaWall. If the suggested solutions fail to resolve the problem or if 
you encounter an issue not described here, please contact your Runco dealer or Runco 
Technical Support. 
 
Table 5-1. Troubleshooting Chart 
SymptomPossible Cause(s)Solution
The display does not turn on...

CinemaWall XP-50/XP-65 Installation/Operation Manual 55 
PREL
IMINARY
6.1 
RS-232 Connection 
and Port Configuration
To interface the CinemaWall with a home theater automation/control system or a PC 
running terminal emulation software, connect it to your control system or PC as shown in 
Figure 3-5. Use a straight-through cable. 
Configure the RS-232 controller or PC serial port as follows: 
 9600 baud
 No parity
 Eight (8) data bits
 One (1) stop bit
 No flow control
6.2 
Serial Command 
Syntax
Serial...

Serial Communications
56 CinemaWall XP-50/XP-65 Installation/Operation Manual
PRELI
MINARY
Table 6-1 lists the CinemaWall serial command set. 
Table 6-1. Serial Commands
ASCIIHexDescription
AAC:MENCLR41 41 43 3A 4D 45 4E 43 4C 52 Audio Menu (Clear)
AAC:MENDYN41 41 43 3A 4D 45 4E 44 59 4E Audio Menu (Dynamic)
AAC:MENSTD41 41 43 3A 4D 45 4E 53 54 44 Audio Menu (Standard)
AAC:SURMON41 41 43 3A 53 55 52 4D 4F 4E Surround (ON)
AAC:SUROFF41 41 43 3A 53 55 52 4F 46 46 Surround (OFF)
AMT:041 4D 54 3A 30 Audio...