Runco Television XP-65 User Manual

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 37 
PREL
IMINARY
SOUNDUse the controls in the SOUND menu to adjust the CinemaWall audio settings. 
To return all SOUND menu settings to their factory-default values, press RESET on the 
remote control unit with the menu on-screen. Or, press  or  repeatedly to highlight 
RESET in the menu, then press the ACTION () button. 
AUDIO MENU: The CinemaWall provides three audio memories for storing and recalling 
sound quality settings. To store...

Operation
38 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
SET UPUse the controls in the SET UP menu to perform advanced image quality adjustments and 
access various other CinemaWall features. 
SIGNAL: Select SIGNAL from the SET UP menu to display information about the current 
signal and to adjust the following settings:
SYNC: Select the sync method used by the PC or other RGB source using the PC 
INPUT. 
In most cases, the AUTO setting works well. However, if you know that your...

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 39 
PREL
IMINARY
XGA MODE (INPUT3/PC INPUT only): You can force the CinemaWall to use a 
specific output resolution with RGB PC sources. To do this select 
XGA MODE from the 
SIGNAL menu and set it to 1024x768, 1280x768 or 1366x768.
NOISE REDUCTION: To apply noise reduction to the source signal, select NOISE 
REDUCTION from the SIGNAL menu. Noise Reduction is useful for clearing up noisy 
images from interlaced SD sources. Set it to OFF, MIN,...

Operation
40 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
START TIME/SHOW DURATION: When the screen saver MODE is TIME OF DAY, 
set START TIME to the time of day that you want the screen saver to activate. When 
the screen saver 
MODE is INTERVAL, set SHOW DURATION to the “normal 
presentation” interval (no screen saver). 
Press  or  to change the SHOW DURATION interval in 15-minute increments, or to 
change the START TIME in one-minute increments. Press and hold  or  to change 
the...

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 41 
PREL
IMINARY
POWER SAVE: Select POWER SAVE from the SET UP menu and set it to ON to reduce 
the overall image intensity by a small amount, thereby reducing power consumption. 
STANDBY SAVE: Select STANDBY SAVE from the SET UP menu and set it to ON to 
minimize power consumption during standby mode. 
POWER MANAGEMENT: Select POWER MANAGEMENT from the SET UP menu and 
set it to ON to activate the power management function for the PC INPUT....

Operation
42 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
SEAM HIDES VIDEO: Select SEAM HIDES VIDEO from the MULTI DISPLAY SETUP 
menu and set it to ON when displaying moving images on a video wall. 
SEAM HIDES VIDEO joins the edges of adjacent displays in a video wall together in 
such a way as to compensate for the gap between them. This causes moving objects 
to appear to move “behind” the gap, for better continuity of motion across the wall: 
 
LOCATION: Select LOCATION from the...

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 43 
PREL
IMINARY
MULTI PIP SETUP: The CinemaWall can display an image from two sources at the same 
time in a variety of ways. To set up this feature, select 
MULTI PIP SETUP from the SET UP 
menu and press the ACTION () button.
MULTI PIP: Select one of the following to define the behavior of the MULTI PIP 
function. To switch to a different multi-PIP display mode, press the MULTI
 PIP remote 
control button repeatedly. 
PIP: With PIP, three...

Operation
44 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
TRANSPARENCY/TRANSPARENCY LEVEL: If you are using the Blend PIP feature, 
you can make the overlay (sub) image transparent so that the main (background) image 
shows through. 
To do this, select TRANSPARENCY from the MULTI PIP SETUP menu and set it to ON. 
Then, select TRANSPARENCY LEVEL from the MULTI PIP SETUP menu to control the 
degree to which you want the main image to show through. 
INSERT/INSERT LEVEL: If you are using...

Operation
CinemaWall XP-50/XP-65 Installation/Operation Manual 45 
PREL
IMINARY
PORTRAIT SETUP: You can create a video wall consisting of three (3x1) CinemaWall 
displays in “portrait” mode and display an enlarged image across all of them. 
To do this, select PORTRAIT SETUP from the SET UP menu and press the ACTION () 
button. Then, configure each display in the video wall as follows:
PORTRAIT SETUP: Select PORTRAIT SETUP from the PORTRAIT SETUP menu, the 
set it to ON to activate portrait mode.  
SEAM...

Operation
46 CinemaWall XP-50/XP-65 Installation/Operation Manual
PREL
IMINARY
OPTIONSUse the controls in the OPTIONS menu to set up the Weekly Command Timer and 
perform other advanced, installation-related tasks. 
To access the OPTIONS menu:
1. Press SET UP. 
2. Press  or  repeatedly until OSD LANGUAGE is highlighted. 
3. Press and hold the SURROUND () button until the page 1 of the OPTIONS menu 
appears (approximately four seconds). 
➤
Off-mer funcon  Enable
Inial Power Mode    Normal
ID select...