Runco Cl 810 Ultra Projector User Manual
Have a look at the manual Runco Cl 810 Ultra Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 123 Runco manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Controls and Functions Runco CL-810 Series Owner’s Operating Manual 9 PREL IMINARY 2.3 CL-810 Remote Control Figure 2-4 shows the CL-810 remote control, and the paragraphs that follow describe its functionality. Figure 2-4. CL-810 Remote Control FOCUS LENSZOOM LIGHT OFF ON VID S-VID COMP1 RGBHD INFO RVR ENTER EXIT MENU BRT CONT COL TNTHDMICOMP2 MEM1 FACTISF DAY ISF NIGHT ANA 16X9VWIDE LBOX 4X3 CINEMA VCINE PBP PIP PIP+ FOCUSACT ZOOMPIP- 2 1 5 46 3 9 80 7 LENS 1 4 6 8 10 2 3 5 7 9
Controls and Functions 10 Runco CL-810 Series Owner’s Operating Manual PREL IMINARY 1.LIGHT Press to illuminate the buttons. 2.ON / OFF Use these buttons to turn the projector on or off. 3.Source Selection Buttons: VID Press to select Composite video input as the source. S-VID (S-Video) Press to select the S-Video input as the source. COMP1 (SD Component) Press to select Component 1 (SD 480i/576i) video input as the source. COMP2 (HD Component) Press to select Component 2 (HD 480p/576p/720p/1080i) video input as the source. RGBHD Press to select the Component 2 RGB input. HDMI Press to select the HDMI input. 4.INFO Displays active source and aspect ratio information. Cursor Keys (, , , ) Use these buttons to select items or settings, adjust settings or switch display patterns. RVR (Reflectance Volume Regulation) Adjusts the lens aperture (iris) setting according to the ambient light level in the viewing area. EXIT Press to save menu item setting(s), exit the current menu and return to the previous one. ENTER Press to select a highlighted menu item or confirm a changed setting. MENU Press this button to show or hide the on-screen display (OSD) controls.
Controls and Functions Runco CL-810 Series Owner’s Operating Manual 11 PREL IMINARY 5.Picture Adjustment Buttons: BRT (Brightness) Press to adjust black level. CONT (Contrast) Press to adjust white level. COL (Color) Press to adjust color intensity. TNT (Tint) Press to adjust color hues. 6.Memory Preset Buttons: MEM1 Press to recall settings for the current input from the “Memory 1” memory preset. ISF NIGHT Press to recall settings for the current input from the “ISF Night” memory preset. ISF DAY Press to recall settings for the current input from the “ISF Day” memory preset. FA C T Press to recall the factory-default settings for the current input. 7.Aspect Ratio Selection Buttons Use these buttons to select an aspect ratio directly, as follows: ANA 16:9 (Anamorphic) For viewing 16:9 DVDs or HDTV programs in their native aspect ratio. 4X3 (Standard 4:3) Scales the input signal to fit 4:3 display mode in the center of the screen. LBOX (Letterbox) For viewing LaserDisc movies or non-anamorphic DVDs on a 4:3 screen. VWIDE (VirtualWide) Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display. CINEMA For viewing 2.35:1 source material on a 1.78:1 (16:9) screen. The upper and lower portions are masked. VCINE (CineWide-equipped projectors only) Selects the Virtual Cinema aspect ratio, which anamorphically compresses a 2.35:1 image to fill a 16:9 image area. (The secondary anamorphic lens then “stretches” the image back to 2.35:1.) 8.0 - 9 Use these keys to enter menu passcodes.
Controls and Functions 12 Runco CL-810 Series Owner’s Operating Manual PREL IMINARY 9.Picture-In-Picture (PIP) / Picture-By-Picture (PBP) Controls: PBP Press to activate PBP mode. ACT Press to switch to the active window in PIP or PBP mode. PIP Press to activate PIP mode. PIP+ Press to enlarge the PIP window. PIP- Press to shrink the size of the PIP window. 10.Motorized Lens Controls: FOCUS Press to focus the image. ZOOM Press to reduce or enlarge the projected image size. LENS Press to access the lens shift controls. PIP and PBP are not available when the CL-810 is used with the SDC-1 System Expansion Device.Note
Runco CL-810 Series Owner’s Operating Manual 13 PREL IMINARY 3.1 Remote Control To install batteries in the remote control, push the battery cover and slide it off. Install the two AAA batteries with the correct polarity and then replace the cover. Notes on Batteries Make sure that the battery polarities are correct when installing the batteries. Do not mix an old battery with a new one or different types of batteries. If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage. Notes on Remote Control Operation Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver on the projector. If the effective range of the remote control decreases, or it stops working, replace the batteries with new ones. The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting. Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the projector, and repeat the operation. The Ø icon appears on the screen when you press a button for an unavailable function. 3Installation
Installation 14 Runco CL-810 Series Owner’s Operating Manual PREL IMINARY 3.2 Quick Setup Table 3-1 gives a quick overview of the CL-810 installation process. The sections following this one provide detailed instructions. Installation should be performed by a qualified custom video installation specialist. Table 3-1. Installation Overview StepProcedureFor Details, Refer to page... 1Choose a location for the projector15 2Install the CineWide (secondary anamorphic) lens (optional)21 3Mount the projector22 4 If installing with an SDC-1, connect ONLY the SDC-1 output to the CL-810 and make all other connections to the SDC-1; continue with Step 7 -- OR -- If installing without an SDC-1, connect signal sources to the CL-810 and continue with Step 5 24 5Connect external controller to RS-232 port (optional)27 6Connect other home theater components to 12-volt trigger outputs (optional)28 7Apply power to the projector 28, 29 8Change the OSD Language (optional)29 9For rear-screen and/or ceiling-mount installations, select the proper picture orientation 29 10Lens adjustments: projected image size (zoom), position (shift) and focus18, 30 11 Projector calibration: adjust the following for each input, starting with Component 1; save settings when finished: Aspect ratio Brightness Contrast Color level Tint Input position 38 through 43 Note
Installation Runco CL-810 Series Owner’s Operating Manual 15 PREL IMINARY 3.3 Installation Considerations Proper installation of your projector will ensure the quality of your display. Whether you are installing a projector temporarily or permanently, you should take the following into account to ensure your projector performs optimally. Installation TypeChoose the installation type that best suits your needs: front or rear screen, floor mount or inverted mount. Table 3-2 compares these various installation methods. Ambient LightIn general, minimize or eliminate light sources directed at the screen. Contrast ratio in your images will be noticeably reduced if light directly strikes the screen, such as when a shaft of light from a window or floodlight falls on the image. Images may then appear washed out and less vibrant. Table 3-2. Projector Installation Options AdvantagesConsiderations Front Screen, Floor Mount Installation Easy to set up Can be moved or changed quickly Easy to access Shares floor space with audience Front Screen, Inverted Mount (ceiling) Installation Does not take up audience space Projector is unobtrusive Projector cannot be accidentally moved Installation is more permanent Projector access is more difficult Rear Screen, Floor Mount Installation Projector is completely hidden Projector is easily accessed Usually good ambient light rejection Requires separate room Installation cost is usually higher Rear Screen, Inverted Mount (ceiling) Installation Projector is completely hidden Usually good ambient light rejection Requires separate room Installation cost is usually higher Rear Screen, Floor Mount with Mirror Projector is completely hidden Usually good ambient light rejection Requires less space behind screen than other rear screen installations Requires separate room Installation cost is usually higher
Installation 16 Runco CL-810 Series Owner’s Operating Manual PREL IMINARY Throw DistanceThrow distance is the distance measured from the front of the projector to the screen. This is an important calculation in any projector installation as it determines whether or not you have enough room to install your projector with a desired screen size and if your image will be the right size for your screen. You can quickly estimate the throw distance by taking the width of the screen and multiplying it by the lens throw ratio; see Figure 3-1. The result of this calculation tells you roughly how far back the projector should be positioned from the screen in order to project a focused image large enough to fill the screen. Figure 3-1. Estimating Throw Distance ➤ Estimating Throw Distance Throw Distance (TD) = Screen Width (w) x Lens Throw Ratio Screen width (w) TD CL-810 Throw Ratio: 1.80 to 2.43 CL-810 Ultra Throw Ratio: refer to Table 3-3
Installation Runco CL-810 Series Owner’s Operating Manual 17 PREL IMINARY Throw Ratio - CL-810 Ultra: Table 3-3 lists the available lens options for the CL-810 Ultra and their associated throw ratios. Throw Ratio - CL-810: The CL-810 offers a throw ratio of between 1.80 and 2.43. Throw Ratio - CL-810 CineWide: The CineWide version of the CL-810 also offers a throw ratio of between 1.80 and 2.43. It uses a prismatic-style anamorphic lens that compresses the image height (as opposed to the cylindrical anamorphic lenses used with the CL-810 Ultra, which stretch the image width). Using this lens type does not change the projector throw ratio. Table 3-3. CL-810 Ultra Lens Options Lens Option (Note 2) Throw Ratio (Throw Dist. ÷ Screen Width) Throw Distance Range (in inches, with 100-inch Wide Screen) MinimumMaximum Proteus A0.67 (Fixed)For rear-screen installations only. Contact Runco Technical Support for more information. Proteus B1.22 - 1.44122144 Proteus C1.45 - 1.75145175 Proteus D1.82 - 2.38182238 Proteus D with CineWide1.38 - 1.79138179 Proteus E2.42 - 3.57242357 Proteus E with CineWide1.84 - 2.70184270 Proteus F3.65 - 5.68365568 Proteus F with CineWide2.77 - 4.29277429 Notes: 1. Throw distance does not affect image quality, provided these ranges are taken into account. 2. Only the Proteus D, E and F lenses can be used with the optional CineWide (secondary anamorphic) lens. Doing so affects the throw distances as shown here.
Installation 18 Runco CL-810 Series Owner’s Operating Manual PREL IMINARY Vertical and Horizontal Position Proper placement of the projector relative to the screen will yield a rectangular, perfectly-centered image that completely fills the screen. Ideally, the projector should be positioned perpendicular to the screen and in such a way that the lens center and screen center are aligned with each other, as shown in Figure 3-2. Figure 3-2. Projector Placement Vertical and Horizontal Lens Shift If it is not possible to align the projector and screen as shown in Figure 3-2, you can use the lens shift (LENS) controls on the projector remote to center the image on the screen. Lens shift is generally expressed as a percentage of the screen height or width, as shown in Figure 3-3 and Figure 3-4. Figure 3-3. Vertical Lens Shift ➤ Height Projection DistanceCeiling Ceiling Installation Screen Height Floor Lens Center Projection Distance Floor Installation Lens Center x Lens Center x ScreenLens Center ➤ Base plate to lens center = approx. 5-6 (depending on the amount of lens shift) 50% Height Lens Shift (0.5 x H) 100% Height Lens Shift (1.0 x H) 150% Height Lens Shift (1.5 x H) Screen Center0% Note: This is a general example of lens shift. Lenses vary in their shift capabilities. No particular lens is used in this example.