Runco Cl 810 Projector User Manual

31Runco CL-810 Owner’s Operating Manual

On-Screen Display Menus
Using the MenuINFORVR
ENTER
EXITMENU
T h i s   u n i t   i s   e q u i p p e d   w i t h   a n   o n - s c re e n 
display (OSD) menu for making adjustments 
and changing settings. There are five menu 
languages; see the Language setting under 
“Installation” on page 35.
•  Press the  Menu button to turn on/off the OSD menu.
  NOTE: If the Main Menu is displayed, you can also press 
Exit to turn it off.
•  Use the arrow buttons ( ▲,◄,▼,►)...

32Runco CL-810 Owner’s Operating Manual

On-Screen Display Menus
Picture Quality 
Adjustments
When you press the Menu button, the Main Menu (shown on the previous page) 
appears on the screen. Use the ▲ or ▼ button to move to an item, then press  Enter 
to select it.
The active source is indicated by an arrow (>) to the left of the source; in the example 
above, Video is the active source. To select a different source, use the ▲ or ▼ button 
to highlight it and press  Enter or ►. 
Runco CL-810
> Video...

33Runco CL-810 Owner’s Operating Manual

➤ FilterThe Filter  setting controls the behavior of the Sharpness control. The available 
s e t t i n g s   d e p e n d   o n   t h e   v e r t i c a l   re s o l u t i o n   o f   t h e   i n p u t   s i g n a l ,   a s   f o l l o w s : 
• With a 480i signal , you can apply the sharpness control to either the input signal 
(1), the output signal (2), both (3) or neither (0).
• With a 480p or higher-resolution signal,  the sharpness control is applied only 
to...

34Runco CL-810 Owner’s Operating Manual

Aspect Ratio
To access the Aspect Ratio adjustments, press Menu, then press the ▲ or ▼ arrows 
to highlight  Aspect Ratio  and press Enter. The Aspect Ratio sub-menu then appears 
(see above).
There are six aspect ratios available that can be selected for video signal inputs:
Aspect Ratio
Anamorphic (16:9)
 
Standard (4:3) 
Letterbox
Virtual Wide
Cinema
Virtual Cinema
Runco CL-810
>   Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI...

35Runco CL-810 Owner’s Operating Manual

On-Screen Display Menus
• CINEMA
The  image  in  the  Letterbox  mode  is 
enlarged to a 16x9 image and the upper 
and lower portions are compressed.
• VIRTUAL CINEMA
A 2.35 image is stretched vertically in 
both directions to fill a 16:9 image.
Aspect Ratio (continued)
Runco CL-810
>  Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI
------------------------
  Aspect Ratio
  Installation
  Option
  Setup
  ISF Calibration
Installation
Language
Picture...

36Runco CL-810 Owner’s Operating Manual

Language
> English    
  Francais
  Espanol
  Deutsch
  Italiano
Press the ▲  or  ▼ arrows to select from the available 
Languages :  English,  French,  Spanish,  German  and 
Italian.
Picture Orientation
> Floor Front    
  Ceiling Front
  Floor Rear
  Ceiling Rear
Keystone Adjust
   -              +      0
Background Color
>  Blue    
  White
RS-232 Baud Rate
>  9600
  38400
  115200
Blue Image
>  Off
  On
Language ➤
Picture Orientation ➤
Keystone Adjust ➤...

37Runco CL-810 Owner’s Operating Manual

Runco CL-810
>  Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI
------------------------
  Aspect Ratio
  Installation
  Option
  Setup
  ISF Calibration
Option
Reset Image Settings
Sleep T imer
Lamp Hours
OSD T imer
OSD Position
PC & HD Adjust
PIP/PBP Set Up
DNR
On-Screen Display Menus
Option
To access the Option adjustments, press  Menu, then press the ▲ or  ▼ arrows to 
highlight  Option and press  Enter. The Installation sub-menu will then appear...

38Runco CL-810 Owner’s Operating Manual

On-Screen Display Menus
PC & HD Adjust
Auto       Yes?
Freq.           0
Phase       +10
H.Pos.           0
V.Pos.           0
Press  Enter to display the  PC & HD Adjust  menu. Use these 
settings to fine-tune 480p and higher-resolution signals for 
optimum picture quality.
• Auto:  Adjusts  the  phase,  frequency  and  position 
automatically.
•  Freq.:  Adjusts the frequency of the signal.
• Phase:  Adjusts the phase of the input signal (similar to 
tracking...

39Runco CL-810 Owner’s Operating Manual

On-Screen Display Menus
SetupTo access advanced picture quality adjustments, use the up- or down-arrow keys to 
highlight Set Up and press  Enter. Use the number buttons on the remote to enter the 
Set Up menu passcode when prompted and press  Enter again. Then, press MENU 
on the remote control. 
Runco CL-810
>  Video
  S-Video
  Component1
  Component2
  RGB-HD
  HDMI
------------------------
  Aspect Ratio
  Installation
  Option
  Set Up
  ISF Calibration...

40Runco CL-810 Owner’s Operating Manual

On-Screen Display Menus
The normal gamma setting of 2.2 is correct for almost all 
signals and conditions. If excess ambient light washes out the 
image and it becomes difficult or impossible to see details in 
dark areas, lower the gamma setting to compensate. This will 
improve contrast while maintaining good details for blacks. 
Conversely, if the image is washed out and unnatural, with 
excessive detail in black areas, increase the setting. Again, 
good gamma...