Ricoh Wg4 User Manual

							159
5Editing and Printing
6Use the four-way controller 
(2345) to choose the frame 
you want to save.
2Plays back or pauses the movie
3 Stops the movie and returns to 
the first frame
4 Reverses the movie frame by 
frame
5 Advances the movie frame by frame
7Press the  4 button.The selected frame is  saved as a still picture.
4Select [Divide Movies] on the edit option selection screen.
5Press the 4 button.The screen for choosing a dividing position appears.
6Use the four-way controller 
(2345) to specify the dividing 
position.
2 Plays back or pauses the movie
3 Stops the movie and returns to 
the first frame
4 Reverses the movie frame by 
frame
5 Advances the movie frame by frame
7Press the  4 button.
A confirmation dialog appears.
8Use the four-way controller ( 2) to 
select [Divide].
To Divide a Movie
1001 0 0 -00420 0 4 2100-
0042
00:060 0 : 0 600:06
11
OKO KOKMENUMENUMENUCancelC a n c e lCancel OKO KOK
Select the imageS e l e c t   t h e   i m a g eto savet o   s a v eSelect the image
to save
Select image forS e l e c t   i m a g e   f o rdividing positiond i v i d i n g   p o s i t i o nSelect image for
dividing position
CancelC a n c e lCancel
1001 0 0 -00420 0 4 200:090 0 : 0 9100-
0042
00:09
OKO KOKMENUMENUMENU
313 131
OKO KOK
OKO KOKOKO KOK
Cancel
Divide at this position?D i v i d e   a t   t h i s   p o s i t i o n ?Divide at this position?
Divide 
						

							160
5Editing and Printing
9Press the 4 button.The movie is divided at the specified position, each segment is saved as a new 
file, and the original movie is deleted.
4Select [Adding title picture] on the edit option selection 
screen.
5Press the  4 button.The screen for selecting a title picture appears.
6Use the four-way controller ( 45) to choose the desired title 
picture.
Only images available for the title picture are displayed.
7Press the  4 button.The screen for confirming the position of the title picture appears.
8Use the four-way controller ( 23) 
to select the position.
A Adds the title picture to the 
beginning of the movie
B Adds the title picture to the end of 
the movie
9Press the  4 button.The selected picture is saved as the title picture.
The protected movies cannot be divided.
• Only a movie for more than 2 seconds (31 frames) can be divided.
• For dividing, every 30 fr ames (31st, 61st, 91st.. frames) can be selected.
To Add a Title Picture to a Movie
• A title picture cannot be added to protected movies.
• If a movie is more than 26 minutes long after adding title pictures, you 
cannot add any more title pictures to it.
OKO KOKOKO KOK
Cancel
Specify the position ofS p e c i f y   t h e   p o s i t i o n   o ftitle picture to addt i t l e   p i c t u r e   t o   a d dSpecify the position of
title picture to add 
						

							161
5Editing and Printing
You can copy images from the built-in memory to the SD Memory Card and vice 
versa. This function can only be selected when an SD Memory Card is inserted 
in the camera.
1Use the four-way controller (2345) to select  p (Image 
Copy) from the Playback Mode Palette.
2Press the  4 button.The copying method selection screen appears.
All the images in the built-in memory are copied to the SD Memory Card at once. 
Before copying the images, make sure that there is enough space on the SD 
Memory Card.
3Use the four-way controller ( 2) to 
select [ 2}{ ].
4Press the  4 button.
All the images are copied to the SD Memory Card.
• When a title picture is added to the beginning of a movie: When the movie 
is played back, the added still picture is played back for three seconds, and 
then the movie is played back. The added still picture is used as the 
thumbnail of the movie.
When a title picture is added to the end of a movie: When the movie is 
played back, the movie is played back, and then the added still picture is 
played back for three seconds. The thumbnail of the movie is not changed 
by adding a title picture to the end of the movie.
• Only a still picture with the same aspect  ratio as the movie can be set as a 
title picture.
Copying Images
Make sure that the camera is turned off before inserting or removing the SD 
Memory Card.
To Copy Files from the Built-in Memory to the SD Memory Card
OKO KOK
Cancel
C a n c e lCancelSDSD
OKO KOK
SDSD 
						

							162
5Editing and Printing
The image selected from the SD Memory Card is copied to the built-in memory.
3Use the four-way controller (23) to select [{}2].
4Press the  4 button.
5Use the four-way controller ( 45) 
to select the image you want to 
copy.
6Press the  4 button.The selected image is copied to the built-in memory.
To copy other images, repeat steps 3 to 6. Select [Cancel] to exit the copy 
operation.
To Copy Files from the SD Memory Card to the Built-in Memory
When an image is copied from the SD Memory Card to the built-in memory, 
a new file name is assigned to the copied image.
Copies this image toC o p i e s   t h i s   i m a g e   t oCopies this image to
alternate memorya l t e r n a t e   m e m o r yalternate memory
101 0 0-0010 0 1
7100-
0017
O KOKMENMEN UMENUOKO KOK
CancelC a n c e lCancel 
						

							163
5Editing and Printing
Printing Settings
You can print pictures taken with the camera in the following ways.
1 Go to a photo processing lab.
2 Use a printer that has an SD Memory Card slot to print directly from the SD Memory Card.
3 Use the software that is available on your computer to print images.
DPOF (Digital Print Order Format) is the format for storing print order data on still 
pictures captured with a digital camera. Once the print order data has been 
stored, the pictures can be printed accord ing to the DPOF settings using a DPOF-
compatible printer or at a photo processing lab.
DPOF cannot be set for movies.
Set the following items for each image.
1Use the four-way controller ( 2345) to select  r (DPOF) 
from the Playback Mode Palette.
2Press the  4 button.The screen for selecting [Single Image] or [All Images] appears.
Setting the Printing Service (DPOF)
If the picture already has the date and/or time imprinted on it (p.106), do not 
set [Date] to  O (On) in DPOF setting. If you select  O, the imprinted date and/
or time may overlap.
Printing a Single Image
Copies For setting the number of prints.  You can print up to 99 copies.
Date Specify whether you want the date inserted on the print or not. 
						

							164
5Editing and Printing
3Use the four-way controller (23) 
to select [Single Image].
4Press the  4 button.The message [Applies DPOF settings to this image] appears.
To make DPOF settings for another image, use the four-way controller ( 45) to 
select another image.
If the selected image already has the DPOF settings, the number of copies and 
date setting (O (On) or P (Off)) that have been previously set will be displayed.
5Use the four-way controller ( 23) 
to choose the number of copies.
6Use the Green button to choose 
whether to imprint the date or not.
O (On) The date will be imprinted.
P  (Off) The date will not be imprinted.
To continue setting DPOF print order data, 
use the four-way controller ( 45) to choose 
another image and repeat steps 5 and 6.
7Press the  4 button.
The settings are saved and the screen shown in step 3 reappears.
Depending on a printer or printing equipment at the photo processing lab, the 
date may not be imprinted on the pictures even if  O (On) is selected for the 
Date setting.
To cancel DPOF settings, set the number of copies to [00] in step 5 and press 
the  4  button.
OKO KOKOKO KOK
Cancel
C a n c e l
Single ImageS i n g l e   I m a g eAll ImagesA l l   I m a g e sCancel
Single Image
All Images
OKO KOK
1001 0 0 -00170 0 1 7100-
0017
MENUMENUMENU
00
OKO KOK
CancelC a n c e lCancelDateD a t eDate Date Copies
Applies DPOF settings
A p p l i e s   D P O F   s e t t i n g sto this imaget o   t h i s   i m a g eApplies DPOF settings
to this image
OKO KOK
1001 0 0-00170 0 1 7100-
0017
MENUMENUMENU
01
CancelC a n c e lCancelDateD a t eDateOKO KOK
Applies DPOF settingsA p p l i e s   D P O F   s e t t i n g sto this imaget o   t h i s   i m a g eApplies DPOF settings
to this image
Date
Copies 
						

							165
5Editing and Printing
DPOF settings are applied to all the images stored in the camera.
1Select [All Images] in step 3 on p.164.
2Press the 4 button.
The message [Applies DPOF settings to all images] appears.
3Choose the number of copies and 
whether to imprint the date or not.
Refer to steps 5 and 6 in “Printing a Single 
Image” (p.164) for details on how to make 
the settings.
4Press the  4 button.The settings for all the images are saved and the camera returns to the initial 
screen of the DPOF setting.
Printing All Images
• The number of copies specified in the [All Images] settings applies to all the 
images. Before printing, check that the number is correct.
• The DPOF settings made with [Single Image] are canceled when the  settings are made with [All Images].
Applies DPOF settingsA p p l i e s   D P O F   s e t t i n g sto all imagest o   a l l   i m a g e sApplies DPOF settings to all images
OKO KOK
CancelC a n c e lCancelDateD a t eDate Date
CopiesOKO KOKMENUMENUMENU
01 
						

							166
6Settings
Camera Settings
Settings for the camera are set from the [W Setting] menu. Refer to explanations 
for each function on how to make these settings.
1Press the  3 button in  Q mode.The [ W Setting] menu appears.
When you press the  3 button in  A mode, press the four-way controller 
( 5 ).
2Use the four-way controller ( 2345) to select an item and 
set it up.
3After finishing the settings, press the  3 button.The setting is saved and the camera returns to the previous screen.
3Press the shutter release button halfway.
The setting is saved and the camera returns to capture mode.
3Press the  3 button before you finish the settings.
The changes are canceled and you can select a menu.
Using the Setting Menu Items
To Save the Setting and Start Taking Pictures
When the [ W Setting] menu is displayed from  Q mode, you can switch to  A 
mode by pressing the  Q button.
To Cancel the Changes and Continue with Menu Operations
The  3  button function varies depending on the screen. Refer to the 
guide indications.
 Exit Exits the menu and returns to the original screen.
Returns to the previous screen with the current settings.
  Cancel Cancels the current selection, exits the menu and returns  to the previous screen.
6Settings
MENU
MENU
MENU 
						

							167
6Settings
Formatting deletes all the data on the SD Memory Card or in the built-in memory.
Be sure to use this camera to format (initialize) an SD Memory Card that is 
unused or has been previously used on other cameras or digital devices.
1Use the four-way controller ( 23) to select [Format] in the 
[W Setting] menu.
2Press the four-way controller ( 5).The [Format] screen appears.
3Use the four-way controller (2) to 
select [Format].
4Press the  4 button.Formatting starts.
When formatting is completed, the camera returns to  A mode or  Q mode.
Formatting the Memory
• Do not remove the SD Memory Card while it is being formatted. This may 
damage the card and make it unusable.
• Formatting deletes protected images and any data recorded on the card  with a computer or any camera.
• SD Memory Cards formatted on a computer or device other than this  camera cannot be used. Be sure to format the card with the camera.
• To format the built-in memory, be sure to eject the SD Memory Card  beforehand. Otherwise, the SD Memory Card will be formatted.
OKOK
Format
All data will be deleted
FormatCancel 
						

							168
6Settings
You can adjust the volume of operation sounds and change the type of sound.
1Use the four-way controller (23) to select [Sound] in the 
[W Setting] menu.
2Press the four-way controller 
(5). 
The [Sound] screen appears.
3Use the four-way controller ( 23) to select [Operation 
Volume].
4Use the four-way controller ( 45) to adjust the volume.
Set the volume to f to mute the start-up sound, shutter sound, operation sound, 
and self-timer sound.
5Change [Playback Volume] in the same way as in steps 3 and 
4.
3Use the four-way controller ( 23) to select [Startup Sound].
4Press the four-way controller ( 5).
A pull-down menu appears.
5Use the four-way controller  (23)  to select the sound type.
Choose from [1], [2], [3], [4], or [Off].
6Press the 4 button.
7Set [Shutter Sound], [Operation Sound] and [Self-timer 
Sound] in the same way as in steps 3 to 6.
Changing the Sound Settings
To Change the Operation Volume/Playback Volume
To Change the Sound Type
MENU
Sound
Operation Volume
11
1Startup Sound
Shutter Sound
Operation Sound
Self-timer SoundOffPlayback Volume