Ricoh R10 User Guide

169
Changing Camera Settings5 This function allows you to crop and record a shot image. 
Conventional digital zoom enlarges a portion of an image to a set 
magnification. Whereas, auto resize zoom saves the cropped 
portion of the image, the image quality is not decreased, however 
the image size may become smaller. The image recording size 
changes depending on the auto resize zoom magnification.
Auto resize zoom is available only when [Pic Quality/Size] is set to 
3648 × 2736. (GP.83)
Available...

170
Changing Camera Settings5
3Press the button ! to select 
[Auto Resize].
4Press the ADJ./OK button.
5Turn and hold the zoom lever 
toward z (Telephoto) until the 
maximum magnification is 
reached on the zoom bar, then 
momentarily release the zoom 
lever, and then turn the zoom 
lever again toward z.
• Each time you turn the zoom lever 
toward z, the image is resized by one setting.
• The size at which the image is recorded is displayed above the zoom 
bar....

171
Changing Camera Settings5 When functions are assigned to the ADJ./OK button, you can 
display various shooting setting screens with fewer button 
operations and without displaying the shooting menu.
You can use [ADJ Btn. Set.1] to [ADJ Btn. Set.4] to assign camera 
functions that can be activated by pressing the ADJ./OK button.
For information on how to use the ADJ. mode, see P.66.
To assign a function to [ADJ Btn. Set.1] to [ADJ Btn. Set.4], follow 
the steps below.
1Display the setup menu.
• For...

172
Changing Camera Settings5When [Level Setting] is turned on, the camera uses a level indicator 
and sounds to let you know whether the image is level. You can 
select from the following level confirmation settings. For information 
on how to use the level function during shooting, see P.62.
1Display the setup menu.
• For the operating procedure, see P.154.
• You can also press and hold the DISP. button in shooting mode to 
display the setting menu. If you pressed and held the DISP. button, 
skip to...

173
Changing Camera Settings5 You can set whether to use the AF auxiliary light when shooting with 
auto focus.
When [AF Aux. Light] is set to [On], the AF auxiliary light lights when 
it is difficult to measure the distance with auto focus when shooting 
in dark surroundings, and the auto focus distance is measured.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button  to select [AF Aux. Light] 
and press the button $.
3Press the button ! to select 
the desired...

174
Changing Camera Settings5If you do not operate the camera for a set period of time, it shuts off 
automatically to conserve battery power (Auto Power Off).
By default, auto power off is set to one minute, but you can change 
this setting.
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button  to select [Auto Power Off] 
and press the button $.
3Press the button ! to select 
the desired setting.
4Press the ADJ./OK button.
Note...

175
Changing Camera Settings5 When [LCD Auto Dim] is set to [On], the picture display dims to 
conserve battery power if the camera is not moved for 
approximately five seconds. Move the camera or press any button 
to return to the original picture display brightness. The default 
setting is [On].
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button  to select [LCD Auto Dim] 
and press the button $.
3Press the button ! to select 
[On]....

176
Changing Camera Settings5During macro shooting, the minimum shooting distance changes 
depending on the zoom position. To display the minimum shooting 
distance on the screen, set [Min. Macro Distance] to [Show]. 
1Display the setup menu.
• For the operating procedure, see P.154.
2Press the ADJ./OK button  to select [Min. Macro 
Distance] and press the button $.
3Press the button ! to select 
[Show].
4Press the ADJ./OK button.
• The minimum shooting distance is 
displayed on the screen when macro...

177
Changing Camera Settings5 You can set the camera to automatically rotate the image during 
playback according to the position of the camera.
When [Auto Rotate] is set to [On], the direction of the playback 
image will be as follows.
When you play back images with the camera held horizontally:
Images shot with the camera held horizontally will appear with 
the same horizontal orientation. Images shot with the camera 
held vertically will automatically be rotated to a vertical 
orientation.
When you...

178
Changing Camera Settings5Caution------------------------------------------------------------------------------------------
•The playback image is not automatically rotated, even when [Auto Rotate] is set to 
[On], in the following cases.
•When playing back movies or images shot with S-Cont. or M-Cont.
•In grid view (GP.54)
•When playing back images shot with the camera tilted too far forward or backward.
•When playing back images upside-down (with the shutter release button facing 
down) or images...