Ricoh R10 User Guide

129
Other Playback Functions3 You can use either [Auto] or [Manual] mode to correct the 
brightness and contrast in still images you have shot and then 
record the corrected images. [Manual] mode allows you to correct 
the image by adjusting the histogram.
Note ----------------------------------------------------------------------------------------------
See P.64 for more information on the histogram display.
1Press the 6 (Playback) button.
2Press the ADJ./OK button !#$ to display the file you 
want to...

130
Other Playback Functions3
5Press the ADJ./OK button ! 
to select [Manual] and press 
the button $.
• The [Level Compensation] screen 
appears. The original image appears 
at the upper left of the screen, the 
histogram is at the lower left, and the 
corrected image is shown on the right.
• If you select a file that cannot use 
level compensation, an error message appears and you are returned 
to the playback menu.
• To cancel level compensation, press the DISP. button.
6Press the MENU button to...

131
Other Playback Functions3
• Example 2) 
To correct an overexposed or 
underexposed image: 
If the image in overexposed, move the left 
point to the right so that it is aligned with 
the left end of the histogram peaks. 
If the image in underexposed, move the 
right point to the left so that it is aligned with 
the right end of the histogram peaks. 
You can then adjust the overall image 
brightness by moving the middle point left 
or right.
• Example 3) 
To boost the contrast in an image: 
If an image...

132
Other Playback Functions3This function allows you to correct the green, magenta, blue and 
amber color tones in still images you have taken and then record 
the corrected images.
1Press the 6 (Playback) button.
2Press the ADJ./OK button !#$ to display the file you 
want to correct.
3Press the MENU button.
• The playback menu appears.
4Press the ADJ./OK button  to 
select [White Balance 
Compensation] and press the 
button $.
• The [White Balance Compensation] 
screen appears. The original image...

133
Other Playback Functions3
6Press the ADJ./OK button.
• Messages appear during the correction process, and then the 
corrected image is recorded. The original image remains unchanged.
Caution------------------------------------------------------------------------------------------•You can only use white balance compensation for still images shot using this camera. 
•You cannot correct the white balance for images shot in Movie, S-Cont or M-Cont 
mode.
•This function may not have any effect for images...

134
Other Playback Functions3You can straighten rectangular objects, such as a message board 
or business card, shot at an angle, to make them look as if they 
were shot squarely.
1Press the 6 (Playback) button.
2Press the ADJ./OK button !#$ to display the file you 
want to straighten.
3Press the MENU button.
• The playback menu appears.
4Press the ADJ./OK button  to 
select [Skew Correction] and 
press the button $.
• The display indicates that the image is 
being processed, and then the area...

135
Other Playback Functions3 Note ----------------------------------------------------------------------------------------------
•The image size does not change for skew corrected images.
•If the image size is large, skew correction will take time. Resize the image (GP.126) 
before performing skew correction to speed up the process.
•The following table shows the approximate time required for skew correction.
•When scene mode is set to [Skew Correct Mode], you can shoot an image and then 
immediately...

136
Other Playback Functions3You can protect files from being accidentally deleted.
Caution------------------------------------------------------------------------------------------
Protected files cannot be deleted normally. However, they will be deleted if you format 
the memory where the files are stored.
1Press the 6 (Playback) button.
•The last file recorded is displayed.
2Press the ADJ./OK button !#$ to display the file you 
want to protect.
3Press the MENU button.
• The playback menu appears....

137
Other Playback Functions3 To protect all your files, follow the steps below.
1Press the 6 (Playback) button.
2Press the MENU button.
• The playback menu appears.
3Press the ADJ./OK button  to 
select [Protect] and press the 
button $.
4Press the ADJ./OK button ! 
to select [All Files].
5Make sure that [Select] is 
selected, and then press the 
ADJ./OK button.
• All files are protected and the symbol 
appears on the screen.
Note...

138
Other Playback Functions3To protect selected files all at once, follow the steps below.
1Press the 6 (Playback) button.
2Turn the zoom lever toward 9 (Thumbnail Display).
• The screen is divided into 20 frames and thumbnails are displayed.
3Press the ADJ./OK button !#$ to select the first file 
you want to protect.
4Press the MENU button.
• The playback menu appears.
5Press the ADJ./OK button  to 
select [Protect] and press the 
button $.
• The Protect symbol appears in the 
upper right corner of the...