Ricoh Projector PJ X3351N User Manual

How to Read This Manual
Symbols
This manual uses the following symbols:
Indicates points to pay attention to when using the projector.
Indicates supplementary explanations of the projector’s functions, and instructions on resolving user
errors.
[ ]
Indicates the names of buttons on the control panel and remote control. It also indicates items displayed
on the menu screens.
(mainly Europe and Asia)
(mainly North America)
Differences in the functions of Region A and Region B models are indicated by two...

Model-Specific Information
This section explains how you can identify the region your projector belongs to.
There is a label on the bottom of the projector, located in the position shown below. The label contains
details that identify the region your projector belongs to. Read the label.
The following information is region-specific. Read the information under the symbol that corresponds to
the region of your projector.
(mainly Europe and Asia)
If the label contains the following, your projector is a...

1. Preparations for Using the Projector
This chapter explains the names and functions of the different parts of the projector and remote control,and how to use them. It also explains how to position the projector and how to connect it to other
equipment.
Precautions for Using the Projector
• If metal objects, or water or other fluids fall inside this machine, you must turn off its power immediately. After turning off the power, be sure to disconnect the power cord plug from the wall
outlet. Then contact...

• Push the power plug all the way into the power outlet. Do not use a power outlet with a looseconnection. Doing so may result in heat buildup. Plug the power cord in the correct direction into
the base. If they are not plugged in correctly, it could result in smoke, fire, or electric shock.• When disconnecting the power cord from the wall outlet, always pull the plug, not the cord. Pulling the cord can damage the power cord. Use of damaged power cords could result in fire
or electric shock.• Do not...

Main Functions
The projector features the following functions that you can use.
360-degree installation angle
The 360-degree installation angle enables tilt-free vertical projection.
Auto eco function
The projector switches the lamp power automatically by detecting the brightness of the projecting
location and image signals. This function is useful for energy saving.
Quick on
The projector starts projection automatically if it detects a device that is connected.
Horizontal keystone distortion adjustment...

Administrator authenticationEnable administrator authentication so that only the administrator can change the security settings.
This improves the security of the projector because general users cannot change the settings.
User logo function
The projector can project a registered logo or image when there is no signal or when it is startingup.
Presentations without a computer
The projector can project JPEG and MPEG files stored on a USB memory device or a digital
camera.
It is possible to convert...

Checking the Accessories
The projector is provided with the following accessories. Make sure that everything is included in the
package.
If anything is missing or damaged, contact your sales representative or service representative.Read This First
Start GuideRemote control
AAA battery LR03
CD-ROMRGB cable
Power cordWarranty card
Carrying bag
(RICOH PJ X3351N/WX3351N only)
• The bundled accessories may vary depending on the location that this projector was purchased. • Use only the RGB cable and power...

• The various applications are on the provided CD-ROM. For instructions about using theapplications, see page 64 "How to Use JPEG Conversion Tool", page 77 "How to Use
QuickProjection", and page 151 "Managing the Projector Using Projector Management Utility".1. Preparations for Using the Projector
16  

Projector Parts and Their FunctionsExterior
The illustrations below depict the RICOH PJ X3351N/WX3351N.
1. Lamp cover Remove to replace the lamp.
2. Zoom lever/Focus lever • Zoom lever (RICOH PJ X3351N/WX3351N)Adjusts the size of the projected image.
• Focus lever (RICOH PJ X4241N/WX4241N) Adjusts the focus of the projected image.
3. Illuminance sensor Measures the brightness of the projecting location.
4. Control panel See page 19 "Control Panel".
5. AC In socket For connecting the power cord...

9. Adjustable feetAdjusts the angle of the projection. Adjustable feet are located on the left and right sides on the projector.
10. Interactive kit attachment cover Remove this cover when attaching the adapter for the optional interactive kit. Be sure to disconnect the powercord before attaching or detaching the adapter. Also, be sure to attach the cover before turning on theprojector. For detail, see the manual for the interactive kit.
11. Intake vents For circulating air from the outside to cool the...