Ricoh Projector PJ WX4152NI User Manual

							Item
Default
DLNA Certification Mode Specify whether the projector works as a DLNA-certified device. The
projector is certified to DLNA 1.5 guidelines for still images. For
details about the supported file types, see page 76 "Projecting
Images Using DLNA-Compatible Devices".• Enable
The projector works as a DLNA-certified device. Of the video
files sent from the DLNA server, those files that are not DLNA
compatible are shown on the file list of the Server Projection
screen.
•
Disable
The projector works according to its own specifications. It does
not work as a DLNA-certified device. All the video files delivered
from the DLNA server appear in the file list of the Server
Projection screen. DisableDisplay Status
PJLink
Item
Default
PJLink Class Display the PJLink class. -Firmware Version
Item
Default
Network/USB Func. Firmware Version Display the firmware version of the network and USB functions. - Network Application Settings Menu
139  
						

							Administrator Authentication
Item
Default
Reset Administrator Password Reset the administrator password. -
Reset PJLink Password Reset the PJLink password. -7. Changing the Projector Settings
140  
						

							Display Status
Item
Input Displays the selected input signals.
Resolution Displays the resolution.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Frequency Displays the synchronous frequency.
This item appears when you select [Computer] or [HDMI] (RGB signals) as the input signal.
Sync Displays the synchronous signal polarity.
This item appears when you select [Computer] as the input signal.
Signal Format Displays the Y/Pb/Pr signal format.
This item appears when you select [Y/Pb/Pr] or [HDMI] (Y/Pb/Pr signals) as the input signal.
Video Mode Displays the video signal color format.
This item appears when you select [Video] as the input signal.
Lamp Time Displays the lamp usage time.
Lamp Reset Count Displays the number of lamp replacements.
Total Time Displays the projector usage time.
Total CO2 Reduction Displays the total reduction in CO 2 caused by setting the lamp to the eco mode.
Eco Time Ratio Displays the ratio of the time eco mode was used to the total use time. Display Status
141  
						

							Item
Current Time Displays the current time specified in [Current Time] in [Default Settings 2].
Main FW Version Displays the version of the firmware on the main board.
Interactive Version (RICOH PJ WX4152NI only) When the interactive kit is connected to the projector, the version of the interactive function is
displayed. 7. Changing the Projector Settings
142  
						

							8. Troubleshooting
This chapter explains the basic problems and troubleshooting methods when an indicator light is lit.
Indicator Display List The projector uses the [Power] button, indicators, and beeps to notify you if a malfunction occurs. Check
the indicator's status, and implement the following measures. " " in the table means the indicator is
flashing.
Indicator location 1. [Power] button
2. Lamp indicator
3.
Temp indicator Status
Causes Solutions
The projector does not turn
on. The projector has malfunctioned. Disconnect the power cord, and
contact your service
representative. 143 
123
CZE123    
						

							Status
Causes Solutions
"Hardware Error" was
displayed, and the projector
turned off during operation. Flashing interval : 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp does not turn on. • The lamp has overheated
and cannot turn on.
• The lamp's service life has
expired.
•
The projector has
malfunctioned. • Disconnect the power cord,
wait a while, and then turn
on the projector again.
You can also press and hold
the [Power] button on the
remote control or the control
panel for two seconds.
• If the lamp burns out, replace it with a new lamp. For
details of how to replace the
lamp, see page 159
"Replacing the Lamp".
The lamp turned off during
operation. Flashing interval: 1 second
• The lamp's service life has
expired.
• The projector has
malfunctioned. •

Disconnect the power cord,
wait a while, and then turn
on the projector again.
You can also press and hold
the [Power] button on the
remote control or the control
panel for two seconds.
• If the lamp burns out, replace it with a new lamp. For
details of how to replace the
lamp, see page 159
"Replacing the Lamp". 8. Troubleshooting
144     
						

							Status
Causes Solutions
The lamp does not turn on,
turned off during operation,
or it does not turn off. Flashing interval: 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation, or it does not turn
on. Flashing interval: 1 second
The lamp cover is not installed
correctly.
Disconnect the power cord, and
reinstall the lamp cover correctly.
For details of how to install the
lamp cover, see page 159
"Replacing the Lamp".
"Temperature Error" was
displayed, and the projector
turned off during operation. Flashing interval: 5 seconds
• The interior has overheated.
•
The projector is being used
in a high-temperature
environment. Place the projector so that the
intake and exhaust vents are not
blocked.
Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
"Fan Error" was displayed,
and the projector turned off
during operation. Flashing interval: 1 to 4
times in 5 seconds The cooling fan in the projector
has malfunctioned.
Disconnect the power cord, and
contact your service
representative. Indicator Display List
145      
						

							Status
Causes Solutions
The projector turned off
during operation, or it does
not turn on. Flashing interval: 0.2
seconds
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation. Flashing interval: 1 second
• The interior has overheated.
•
The projector is being used
in a high-temperature
environment. •
Place the projector so that the
intake and exhaust vents are
not blocked.
• Disconnect the power cord, wait a while, and then turn
on the projector again.
You can also press and hold
the [Power] button on the
remote control or the control
panel for two seconds.
If the problem cannot be
resolved, contact your
service representative.
The lamp turned off during
operation. Flashing interval: 1 second
• The lamp's service life has
expired. • Disconnect the power cord,
wait a while, and then turn
on the projector again.
You can also press and hold
the [Power] button on the
remote control or the control
panel for two seconds.
• If the lamp burns out, replace
it with a new lamp. For
details of how to replace the
lamp, see page 127
"Replacing the Lamp". 8. Troubleshooting
146     
						

							Status
Causes Solutions
The lamp does not turn on. Flashing interval: 1 second
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative.
The lamp turned off during
operation. Flashing interval: 1 second
The projector has malfunctioned. Disconnect the power cord, wait a
while, and then turn on the
projector again.
You can also press and hold the
[Power] button on the remote
control or the control panel for two
seconds.
If the problem cannot be resolved,
contact your service
representative. Indicator Display List
147    
						

							Common Problems
If you think a malfunction has occurred, check the following before contacting your service
representative.
Problem
Solutions
Power does not turn on. • Make sure the power plug or connector is connected
correctly.
• Make sure the lamp cover is mounted correctly. For
details, see page 159 "Replacing the Lamp".
•
When projecting an image on the tabletop, be sure to
press the [Power] button and wait until the projector
cooling process completes before disconnecting the
power cord.
If you disconnect the power cord without pressing the
[Power] button or the projector's power is turned off
suddenly due to a power outage, you cannot turn the
projector back on for up to approximately 25 minutes
because it needs to release the internal heat. Wait until
the projector cools down.
Power turns off during use. • Make sure the environment in which the projector is
being used is within the acceptable temperature range.
• Make sure the vents are not blocked. 8. Troubleshooting
148