Ricoh Projector PJ WX3351N User Manual

							1. StandardThe projector is placed in front of a screen onto which the images are projected.
2. Rear The projector is placed behind a screen onto which the images are projected.
3. Ceiling The projector is mounted on the ceiling in front of a screen onto which the images are projected.
4. Rear Ceiling The projector is mounted on the ceiling behind a screen onto which the images are projected.
Relationship Between the Projection Distance and the Screen Size
The size of the projected image varies according to the distance from the projector to the screen.
Refer to the following tables to position the projector in a suitable position. The projection sizes
presented in tables are for a full size image without keystone adjustment. The projection distance
becomes shortest when the zoom lever is at the end of the wide side, and longest when the zoom lever is
at the end of the tele side.
RICOH PJ X3351N
Projection size
a
Projection distance
b
Projection height
ShortestLongest30 inches0.68 m (2.22 feet)1.05 m (3.45 feet)4 cm (1 inch)40 inches0.92 m (3.02 feet)1.41 m (4.64 feet)5 cm (2 inches)Positioning the Projector
29CUD083
1. Standard 2. Rear
4. Rear Ceiling 3. Ceiling   
						

							Projection size
a
Projection distance
b
Projection height
ShortestLongest60 inches1.40 m (4.58 feet)2.13 m (6.99 feet)7 cm (3 inches)80 inches1.87 m (6.12 feet)2.86 m (9.38 feet)10 cm (4 inches)100 inches2.34 m (7.68 feet)3.58 m (11.75feet)12 cm (5 inches)120 inches2.82 m (9.24 feet)4.31 m (14.12 feet)14 cm (6 inches)150 inches3.54 m (11.60 feet)5.39 m (17.67 feet)18 cm (7 inches)200 inches4.73 m (15.50 feet)7.20 m (23.61 feet)24 cm (9 inches)RICOH PJ WX3351N
Projection size
a
Projection distance
b
Projection height
ShortestLongest40 inches0.77 m (2.53 feet)1.20 m (3.94 feet)3 cm (1 inch)60 inches1.18 m (3.87 feet)1.80 m (5.92 feet)5 cm (2 inches)80 inches1.58 m (5.18 feet)2.42 m (7.92 feet)6 cm (2 inches)100 inches1.98 m (6.50 feet)3.03 m (9.94 feet)8 cm (3 inches)120 inches2.39 m (7.84 feet)3.65 m (11.98 feet)9 cm (4 inches)150 inches2.99 m (9.81 feet)4.57 m (14.98 feet)11 cm (4 inches)200 inches4.00 m (13.12 feet)6.10 m (20.01 feet)15 cm (6 inches)240 inches4.81 m (15.79 feet)7.33 m (24.06 feet)18 cm (7 inches)RICOH PJ X4241NProjection sizea
Projection distanceb
Projection height50 inches0.59 m (1.94 feet)6 cm (2 inches)60 inches0.72 m (2.36 feet)7 cm (3 inches)1. Preparations for Using the Projector
30  
						

							Projection sizea
Projection distanceb
Projection height70 inches0.85 m (2.78 feet)8 cm (3 inches)80 inches0.97 m (3.20 feet)10 cm (4 inches)90 inches1.10 m (3.62 feet)11 cm (4 inches)100 inches1.23 m (4.04 feet)12 cm (5 inches)110 inches1.36 m (4.46 feet)13 cm (5 inches)120 inches1.49 m (4.88 feet)14 cm (6 inches)RICOH PJ WX4241NProjection sizea
Projection distanceb
Projection height60 inches0.61 m (2.00 feet)5 cm (2 inches)70 inches0.72 m (2.35 feet)5 cm (2 inches)80 inches0.83 m (2.71 feet)6 cm (2 inches)90 inches0.94 m (3.07 feet)7 cm (3 inches)100 inches1.04 m (3.43 feet)8 cm (3 inches)110 inches1.15 m (3.78 feet)8 cm (3 inches)120 inches1.26 m (4.14 feet)9 cm (4 inches)140 inches1.48 m (4.85 feet)11 cm (4 inches)Positioning the Projector
31  
						

							Connecting Equipment to the Projector• Do not place the power cord and connection cable in a way that might cause someone to tripand fall. The machine might fall over and cause an injury.
Various equipment can be connected to the projector.
Turn off the power to any equipment before connecting it to the projector. Be sure to read the manual for
the applicable equipment before connecting it to the projector.
Connecting a Computer
• Some computers cannot be connected to the projector. Before connecting a computer to the projector, check the output terminals and signal compatibility.
Connecting to the RGB out port
Connect an RGB cable to the Computer1 In port of the projector and to the RGB out port of a computer.
To output audio from the speaker on the projector, connect an audio cable to the Audio In port of the
projector and to the audio out port of a computer.
• Use the RGB cable provided with the projector.
• You can also use the Computer2 In/Monitor Out port to input RGB signals if [Computer 2 Terminal] in [Default Settings 1] is specified as [Input].
Connecting to the HDMI port
Connect an HDMI cable to the HDMI ports of the projector and the computer.
1. Preparations for Using the Projector
32  CUD093    
						

							Connecting to the DVI out port
To input a DVI signal to the projector, connect a DVI-to-HDMI cable to the HDMI port of the projectorand to the DVI out port of a computer. To output audio from the speaker on the projector, connect an
audio cable to the Audio In port of the projector and to the audio out port of a computer.
• You can use a DVI-to-HDMI conversion adapter instead of a DVI-to-HDMI cable.
Connecting via a network using a wired LAN
Connect an Ethernet cable to the LAN port of the projector and to a network device such as a hub. For details about how to connect an Ethernet cable, see page 67 "Connecting an Ethernet Cable". To use
the projector via a network, you must specify settings such as the IP address. For details, see page 70
"Connecting the Projector to a Network".
• Use an Ethernet cable that is shielded.
Connecting via a network using a wireless LAN
The RICOH PJ X3351N/WX3351N/WX4241N are equipped with a wireless connectivity function. Before using a wireless LAN, see page 68 "Precautions for Using a Wireless LAN". To use the
projector via a network, you must specify settings such as the IP address. For details, see page 70
"Connecting the Projector to a Network".
Connecting Equipment to the Projector
33CUD094 CUC032  CUD095    
						

							Connecting AV Equipment
Use a cable that supports the signal being input when connecting AV equipment.Connecting to the HDMI port
Connect an HDMI cable to the HDMI ports of the projector and the AV equipment.
• Some devices may not operate properly when connected using HDMI.
• Use only an HDMI cable that has the HDMI logo. To input 1080p image signals, use a high-speed HDMI cable. A conventional HDMI cable may not work properly.
Connecting to the video out port
Connect a video cable to the Video In port of the projector and to the video out port of AV equipment.
To output audio from the speaker on the projector, connect an audio cable to the Audio In Port of the
projector and to the audio out port of AV equipment.
Connecting to the Y/Pb/Pr out port
Connect a D-sub to component video cable to the Computer1 In port of the projector and to the
Y/Pb/Pr out port of the AV equipment. To output audio from the speaker on the projector, connect an
audio cable to the Audio In Port of the projector and to the audio out port of AV equipment.
1. Preparations for Using the Projector
34CUD097 CUD096  CUD098   
						

							Connecting an External Display Device
You can display the projected image on another display simultaneously by connecting the projector and
the external display device. The image signals input into the Computer1 In port can be displayed on an
external display device.
To connect an external display, specify [Computer 2 Terminal] to [Output]. Then connect an RGB cable
to the Computer2 In/Monitor Out port of the projector and the RGB in port of an external display
device.
• Only the image input from a computer or AV equipment is displayed on the external display device. Images generated by the projector, such as menu screens, are not displayed on the
external display device.
• Use the external display device's settings to adjust its display.
Connecting an External Speaker
You can output the audio signal to an external speaker. To connect an external speaker, connect an audio cable to the Audio Out port of the projector and the audio in port of an external speaker.
• There is no sound output from the projector's speaker when an external speaker is connected.
• You can adjust the sound output from the external speaker by using the [Volume] button.
Connecting Equipment to the Projector
35CUD099 CUD073  CUD074    
						

							1. Preparations for Using the Projector
36  
						

							2. Projecting an Image
This chapter explains the procedure for projecting an image.
Basic Operations for Using the Projector
• If [Key Lock] in [Default Settings 2] is specified as [On], you cannot operate the projector from its control panel. Use the remote control.
• If you press a button that is disabled, the projector beeps and the "Invalid operation." or "This function cannot be used on this product." message appears on the screen.
• If [Beep] in [Default Settings 1] is specified as [Off], the projector does not beep.
Turning On the Projector
• Be sure to locate the machine as close as possible to a wall outlet. This will allow easy disconnection of the power cord in the event of an emergency.
1. Insert the connector of the power cord set into the AC In socket on the lens side of the
projector.
2. Insert the power plug into a power outlet.
When [Direct Power On] in [Default Settings 2] is set to [On], the projector turns on in this step. Proceed to Step 4.
3. Press the [Power] button.
37  CUD065    
						

							The projector beeps and the indicator flashes blue.
The start-up screen is displayed.
To project an image from the connected equipment, see page 38 "Projecting an Image".
When the projector is turned on for the first time after it is purchased, the start menu appears.
Specify the display language and network settings. For details, see page 38 "When the start menu is displayed".
• Do not place anything near the power outlet.
• The password input screen is displayed if a password for the projector is specified in [Startup Password] under [Default Settings 2]. Enter a password.
• The start-up screen closes shortly after appearing. You can specify that the start-up screen not appear in [Start-up Screen] under [Default Settings 1].
When the start menu is displayed
When the projector is turned on for the first time after it is purchased, specify the display language and
network settings. The start menu will also be displayed when [Reset All] in [Default Settings 2] is
executed.
1. Select the display language, and then press the [Enter] button.
2. Specify the network settings on Network Setting Wizard.
To skip the network settings, select [Cancel]. For details about how to use Network Setting Wizard, see page 70 "Connecting the Projector to a Network".
• The display language can also be changed in the menu screen. For details, see page 107 "Default Settings 2 Menu".
• You can also open Network Setting Wizard in the menu screen. For details, see page 112 "Network Settings Menu".
Projecting an Image
1. Turn on the equipment that is connected to the projector.
To project the image of an AV equipment, press the play button on the AV equipment.
To project a laptop computer's screen, switch the computer's image output. For details, see
page 39 "When projecting the screen of a laptop computer".
The input signal is detected automatically and the image is projected.
2. If an image is not projected automatically, press the [Input] button.
2. Projecting an Image
38