Ricoh Projector PJ WX3351N User Manual
Have a look at the manual Ricoh Projector PJ WX3351N User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 127 Ricoh manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
![Page 116
ItemDefaultCommunication ModeSelect the wireless LAN communication mode.• Infrastructure Select this mode when you want to connect the projector to a
wireless LAN network. You need to specify [SSID] and items in
[Security] and [TCP/IP Settings] in this mode.
• Adhoc Select this mode when you want to connect the projector and
the computer directly. The projector specifies [SSID] and items in
[Security] and [TCP/IP Settings] automatically in this mode.AdhocSSID
Enter the SSID to connect to a wireless LAN...](http://img.usermanuals.tech/thumb/64/100048/w64_projector_manual_8921_d-115.png "Page 116
ItemDefaultCommunication ModeSelect the wireless LAN communication mode.• Infrastructure Select this mode when you want to connect the projector to a
wireless LAN network. You need to specify [SSID] and items in
[Security] and [TCP/IP Settings] in this mode.
• Adhoc Select this mode when you want to connect the projector and
the computer directly. The projector specifies [SSID] and items in
[Security] and [TCP/IP Settings] automatically in this mode.AdhocSSID
Enter the SSID to connect to a wireless LAN...")
![Page 117
ItemDefaultDefault GatewayEnter the default gateway.0.0.0.0
Security
ItemDefaultAuthentication MethodSelect the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA/WPA2-PSK
• WPA2-PSK
• WPA/WPA2-EAP
• WPA2-EAPOpen SystemEncryption Method
Select the wireless LAN encryption method.• No Encryption Communication is not encrypted. You can select [No Encryption]
if you select [Open System] in [Authentication Method].
• WEP You can select [WEP] if you select [Open System] in
[Authentication...](http://img.usermanuals.tech/thumb/64/100048/w64_projector_manual_8921_d-116.png "Page 117
ItemDefaultDefault GatewayEnter the default gateway.0.0.0.0
Security
ItemDefaultAuthentication MethodSelect the wireless LAN authentication method.• Open System
• WEP Shared Key
• WPA/WPA2-PSK
• WPA2-PSK
• WPA/WPA2-EAP
• WPA2-EAPOpen SystemEncryption Method
Select the wireless LAN encryption method.• No Encryption Communication is not encrypted. You can select [No Encryption]
if you select [Open System] in [Authentication Method].
• WEP You can select [WEP] if you select [Open System] in
[Authentication...")
![Page 118
ItemDefaultTransmission WEP Key NumberSelect the Key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [Open System] or [WEP Shared
Key] in [Authentication Method] and select [WEP] in [Encryption
Method].
When using 64 bit WEP, up to 10 characters can be used for
hexadecimal and up to 5 characters for ASCII. When using 128 bit WEP, up to 26 characters can be used for hexadecimal and up to 13...](http://img.usermanuals.tech/thumb/64/100048/w64_projector_manual_8921_d-117.png "Page 118
ItemDefaultTransmission WEP Key NumberSelect the Key number used to authenticate and encrypt transmissions
when you select [WEP] in [Encryption Method].
• 1
• 2
• 3
• 41Network Key
Enter the WEP key when you select [Open System] or [WEP Shared
Key] in [Authentication Method] and select [WEP] in [Encryption
Method].
When using 64 bit WEP, up to 10 characters can be used for
hexadecimal and up to 5 characters for ASCII. When using 128 bit WEP, up to 26 characters can be used for hexadecimal and up to 13...")
![Page 119
ItemDefaultClient Certificate User NameEnter the client certificate user name used for WPA/WPA2-EAP orWPA2-EAP when [EAP-TLS] is selected in [EAP Type].
This setting is optional. If it is blank, the default value of the certificate
will be used to decrypt the certificate.(blank)Client Certificate List
Displays a list of imported client certificates.-Import CA CertificateImports a CA certificate when [WPA/WPA2-EAP] or [WPA2-EAP] is
selected in [Authentication Method].-CA Certificate List
Displays a list...](http://img.usermanuals.tech/thumb/64/100048/w64_projector_manual_8921_d-118.png "Page 119
ItemDefaultClient Certificate User NameEnter the client certificate user name used for WPA/WPA2-EAP orWPA2-EAP when [EAP-TLS] is selected in [EAP Type].
This setting is optional. If it is blank, the default value of the certificate
will be used to decrypt the certificate.(blank)Client Certificate List
Displays a list of imported client certificates.-Import CA CertificateImports a CA certificate when [WPA/WPA2-EAP] or [WPA2-EAP] is
selected in [Authentication Method].-CA Certificate List
Displays a list...")
![Page 123
Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and...](http://img.usermanuals.tech/thumb/64/100048/w64_projector_manual_8921_d-122.png "Page 123
Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and...")
![Page 126
SecurityItemDefaultAdministrator AuthenticationSpecify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
RICOH PJ X3351N/WX3351N/WX4241N
• Changing [Transmission WEP Key Number], [Network Key],[EAP Type], [Client Certificate User Name], [MS-CHAP v2
User Name], [MS-CHAP v2 Password], [Windows Domain
Name], [Server Certificate Authentication],...](http://img.usermanuals.tech/thumb/64/100048/w64_projector_manual_8921_d-125.png "Page 126
SecurityItemDefaultAdministrator AuthenticationSpecify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
RICOH PJ X3351N/WX3351N/WX4241N
• Changing [Transmission WEP Key Number], [Network Key],[EAP Type], [Client Certificate User Name], [MS-CHAP v2
User Name], [MS-CHAP v2 Password], [Windows Domain
Name], [Server Certificate Authentication],...")
Projector Search SettingsItemDefaultProjector SearchSpecify whether or not to search for the projector automatically whenthe projector and the device connected to the projector are on the same network.Enable HTTP Server Settings ItemDefaultHTTP Port Enter an HTTP port that is between 1 and 65535.80 Projector ID ItemDefaultProjector NameEnter an ID to identify the projector on the network. Enter up to 16 characters. You can use alphanumeric characters, hyphens, and periods for projector names. Only a letter can be used for the first character of the projector's name. Hyphens and periods cannot be entered consecutively and cannot be used for the last character of the projector's name.RPJxxxxxx *1Identification Code Enter the 4-digit identification code for connecting the projector and the computer using QuickProjection.0000 to 9999 *2 *1 xxxxxx is the last six digits of the wired LAN's MAC address. *2 Each projector has a unique identification code as the default setting. Network Settings Menu 119
Setup WizardItemDefaultNetwork Setting WizardOpen Network Setting Wizard. For details about Network Setting Wizard, see page 70 "Connecting the Projector to a Network".- Display Status Wired LAN ItemDefaultCurrent wired LAN settings are displayed. You can confirm the following items: Connection Status, MAC Address, Transmission Speed, IP Address, Subnet Mask, Default Gateway- Wireless LAN (RICOH PJ X3351N/WX3351N/WX4241N only) ItemDefaultCurrent wireless LAN settings are displayed. You can confirm the following items: Connection Status, Radio Field Intensity, MAC Address, Access Point BSSID, Communication Mode, Transmission Speed, Channel, SSID, Authentication Method, Encryption Method, IP Address, Subnet Mask, Default Gateway- Firmware Version ItemDefaultNetwork/USB Func. Firmware Version Display the firmware version of the network and USB functions.-5. Changing the Projector Settings 120
Network Application Settings Menu This section explains the items in the Network Application Settings menu under the Network/USB Settings menu tab. You can also specify and check the items in the Network Application Settings menu using Web Image Monitor. However, the following items are available only on the menu screen. • [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and [Control System Port] in [Administration Tools] • [DLNA Certification Mode] in [Server] On Web Image Monitor, you can check [Network/USB Func. Firmware Version] on the top page. For details about Web Image Monitor, see page 154 "Managing the Projector Using Web Image Monitor". Administration Tools Web Image Monitor ItemDefaultWeb Image Monitor Specify whether or not to allow the projector settings to be changedand checked using a web browser. To enable this setting, you must restart Web Image Monitor after making the change. For details about Web Image Monitor, see page 154 "Managing the Projector Using Web Image Monitor".Enable AMX Device Discovery ItemDefaultAMX Device Discovery Specify whether or not to allow the projector to be controlled and monitored by AMX Device Discovery. To use this function, an AMX controller is required in your network environment. For details about AMX Device Discovery, see the AMX LLC website.DisableNetwork Application Settings Menu 121
Crestron RoomViewItemDefaultCrestron RoomViewSpecify whether or not to allow the projector to be controlled and monitored by Crestron RoomView. For details about Crestron RoomView, seepage 157 "Controlling and Monitoring the Projector Using Crestron RoomView".DisableCrestron WebUI User Auth. Specify whether or not to restrict access to Crestron WebUI with a password.OffCrestron WebUI User Password Enter the password for Crestron WebUI user authentication up to 26 characters.(blank)Crestron WebUI Admin. Auth. Specify whether or not to restrict access to the tools screen on Crestron WebUI with a password.OffCrestron WebUI Admin. Password Enter the password for Crestron WebUI administrator authentication up to 26 characters.(blank)Control System IP Address Enter the IP address of Crestron Control System.0.0.0.0Control System IP IDEnter the IP ID to connect to Crestron Control System.3Control System Port Enter the port number for communicating to Crestron Control System.41794 PJLink ItemDefaultPJLink AuthenticationSpecify whether or not to set PJLink authentication.Off5. Changing the Projector Settings 122
ItemDefaultPJLink PasswordEnter a password used when setting the PJLink authentication. Up to 32 alphanumeric characters can be used.(blank)Network Application Settings Menu 123
SecurityItemDefaultAdministrator AuthenticationSpecify whether or not to set administrator authentication. A administrator password is required to change this setting. If administrator authentication is set, a password is required for the following operations: RICOH PJ X3351N/WX3351N/WX4241N • Changing [Transmission WEP Key Number], [Network Key],[EAP Type], [Client Certificate User Name], [MS-CHAP v2 User Name], [MS-CHAP v2 Password], [Windows Domain Name], [Server Certificate Authentication], [Intermediate CA Permission], [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [PJLink Authentication], and [PJLink Password] • Using the simple wireless LAN setup function and Network Setting Wizard • Importing, deleting, or displaying client or CA certificates • Turning the projector on or off via a network • Changing the settings using Web Image Monitor • Executing [Reset Security Settings] RICOH PJ X4241N • Changing [Crestron WebUI User Auth.], [Crestron WebUI UserPassword], [Crestron WebUI Admin. Auth.], [Crestron WebUIAdmin. Password], [PJLink Authentication], and [PJLink Password] • Using Network Setting Wizard • Turning the projector on or off via a network • Changing the settings using Web Image Monitor • Executing [Reset Security Settings]OffAdministrator Password Enter the administrator password. Up to 32 alphanumeric characters canbe used. The current password is required to change the administrator password.(blank)5. Changing the Projector Settings 124
ItemDefaultApplication AuthenticationSpecify whether to enable or disable Application Authentication.OffApplication PasswordEnter the password to be used for Application Authentication. Up to 32 alphanumeric characters can be used.(blank)Reset Security Settings Reset the values of the following settings protected by Administrator Authentication: RICOH PJ X3351N/WX3351N/WX4241N [Transmission WEP Key Number], [Network Key], [EAP Type], [Client Certificate User Name], [MS-CHAP v2 User Name], [MS- CHAP v2 Password], [Windows Domain Name], [Server Certificate Authentication], [Intermediate CA Permission], [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [PJLink Authentication], and [PJLink Password]. RICOH PJ X4241N [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [PJLink Authentication], and [PJLink Password].- Server Remote Projection Control ItemDefaultRemote Projection Control Specify whether or not to enable the Remote Projection Control function. The Remote Projection Control function allows you to project images from a tablet computer or a smartphone via a network. For details about how to project images using this function, see page 80 "Projecting Images Using DLNA-Compatible Devices".EnableNetwork Application Settings Menu 125
Still ImageItemDefaultDisplay EffectSelect the display effect for switching the image.• None • Push The current image is pushed off by the next image. • Wipe The current image is wiped off by the next image. • Fade The current image fades out and the next image fades in.NoneDisplay Interval (sec.) Enter the slide show switching interval from 5 to 999 seconds.5 seconds Moving Image ItemDefaultRepeatSpecify whether or not to repeat video playback.OffDLNA Certification ModeSpecify whether the projector works as a DLNA-certified device. The projector is certified to DLNA 1.5 guidelines for still images. For details about the supported file types, see page 80 "Projecting Images Using DLNA-Compatible Devices". • Enable The projector works as a DLNA-certified device. Of the video files sent from the DLNA server, those files that are not DLNA compatible are shown on the file list of the Server Projection screen. • Disable The projector works according to its own specifications. It does not work as a DLNA-certified device. All the video files delivered from the DLNA server appear in the file list of the Server Projection screen.Disable5. Changing the Projector Settings 126
Display Status PJLink ItemDefaultPJLink ClassDisplay the PJLink class.- Firmware Version ItemDefaultNetwork/USB Func. Firmware VersionDisplay the firmware version of the network and USB functions.- Administrator Authentication ItemDefaultReset Administrator PasswordReset the administrator password.-Reset PJLink PasswordReset the PJLink password.-Network Application Settings Menu 127
Display StatusItemInputDisplays the selected input signals.ResolutionDisplays the resolution. This item appears when you select [Computer 1], [Computer 2], or [HDMI] (RGB signals) as the input signal.Frequency Displays the synchronous frequency. This item appears when you select [Computer 1], [Computer 2], or [HDMI] (RGB signals) as the input signal.Sync Displays the synchronous signal polarity. This item appears when you select [Computer 1] or [Computer 2] as the input signal.Signal Format Displays the Y/Pb/Pr signal format. This item appears when you select [Y/Pb/Pr] or [HDMI] (Y/Pb/Pr signals) as the input signal.Video Mode Displays the video signal color format. This item appears when you select [Video] as the input signal.Lamp Time Displays the lamp usage time.Lamp Reset CountDisplays the number of lamp replacements.Total TimeDisplays the projector usage time.Total CO2 ReductionDisplays the total reduction in CO 2 caused by setting the lamp to the eco mode.5. Changing the Projector Settings 128