Ricoh Projector PJ WX3351N User Manual

5.Hold the handle, and then pull the lamp unit out of the projector.
6.Insert a new lamp unit.
Make sure that the small projections inside the projector are inserted into the holes of the lamp unit
properly.
7. Tighten the two screws on the left side of the lamp unit.
8.Attach the inner lamp cover by sliding it from the right.
Make sure the inner lamp cover is inserted into the slits inside the projector.
Replacing the Lamp
149CUD025 CUD026 CUD027   

9.Tighten the screw on the right side of the inner lamp cover.
10. Put the outer lamp cover on the projector, and then slide it to the left.
Make sure the projections on the left edge of the outer lamp cover are inserted into the holes on the
projector properly.
Correctly install the outer lamp cover. Incorrect installation may prevent the lamp or projector from
turning on.
11. Reset the lamp time.
For the reset method, see the manual provided with the lamp.
• The lamp's service life can be verified...

Managing the Projector Using Projector
Management Utility
Projector Management Utility conforms to the PJLink class 1 standards, and is compatible with all class 1
commands.
A maximum of 100 projectors connected to the network can be managed using one computer.
Projector Management Utility operating environment is described below. • Supported operating system • Windows Vista Ultimate, Business, Home Premium, Home Basic, SP2 or later (32-bit and 64-bit versions)
• Windows 7 Home Premium, Professional,...

• To uninstall Projector Management Utility, use the program delete function in [Control Panel] todelete "RICOH Projector Management Utility".
Settings Required to Use Projector Management Utility
Specify the following settings to control the projector using Projector Management Utility: • Connect the projector to a network using [Network Settings]
• [Projector Name] in [Network Settings]
• [PJLink] items in [Network Application Settings]
For details, see page 112 "Network Settings Menu"...

WX4241N only) so that the projector can be turned on from standby mode via a wired LAN or
wireless LAN.
• If a communications error prevents the projector from being detected, "?" is displayed. If the connection failed due to an incorrect password or other reason, "×" is displayed.
• Mute function is not applied if it is not supported by the projector. The projector supports "Video & Audio" mute. "Video" mute and "Audio" mute are not supported.
• An input signal...

Managing the Projector Using Web Image
Monitor
Using Web Image Monitor, you can check the projector status and change settings.
To use this function, specify the following settings: • Connect the projector to a network using [Network Settings]
• Select [Enable] in [Web Image Monitor] under [Network Application Settings] To enable this setting after you change it, you must restart Web Image Monitor.
For details, see page 112 "Network Settings Menu" and page 121 "Network Application Settings...

1. LanguageSelect the display language for Web Image Monitor.Available languages are as follows:
English, French, German, Spanish, Italian, Dutch, Japanese, Simplified Chinese.
2. Crestron Displays Crestron WebUI. For details about Crestron WebUI, see page 157 "Controlling and
Monitoring the Projector Using Crestron RoomView".
This item appears when [Crestron RoomView] in [Network Application Settings] is set to [Enable].
3. Login/Logout To enter edit mode, click [Login], and then enter the...

Browse ModeThis mode requires no user login.
In browse mode, you can check the projector status and settings, but you cannot change the
projector settings.
Edit Mode
The administrator password is required for the user to log in to the edit mode.In edit mode, you can check the projector status and settings, and also change the projector
settings.
• When [Administrator Authentication] in [Network Application Settings] is set to [Off], you can use Web Image Monitor in edit mode without entering a password....

Controlling and Monitoring the Projector Using
Crestron RoomView
The projector supports Crestron RoomView. Crestron RoomView is a system developed by Crestron
Electronics for controlling and monitoring multiple devices on a network. For more information, see the
Crestron Electronics website.
What you can do with Crestron RoomView
• Controlling and monitoring the projector using a web browserUsing Crestron WebUI, you can control and monitor the projector from your computer. For
details, see page 157...

3.Click [Crestron] at the top right on Web Image Monitor.
The top screen of Crestron WebUI appears.
• If [Crestron WebUI User Auth.] under [Network Application Settings] is enabled, a password is required to access Crestron WebUI.
Using Crestron WebUI
Top screen This screen is displayed when you access Crestron WebUI, or click [Exit] on the tools screen or
information screen. You can switch the input signal, adjust the image and the volume of the
speaker, and turn off the projector on this screen.
7....