Ricoh Projector PJ WX3351N User Manual

Projector Search SettingsItemDefaultProjector SearchSpecify whether or not to search for the projector automatically whenthe projector and the device connected to the projector are on the
same network.Enable
HTTP Server Settings
ItemDefaultHTTP Port
Enter an HTTP port that is between 1 and 65535.80
Projector ID
ItemDefaultProjector NameEnter an ID to identify the projector on the network. Enter up to 16
characters. You can use alphanumeric characters, hyphens, and periods for projector names. Only a...

Setup WizardItemDefaultNetwork Setting WizardOpen Network Setting Wizard. For details about Network Setting
Wizard, see page 70 "Connecting the Projector to a Network".-
Display Status
Wired LAN
ItemDefaultCurrent wired LAN settings are displayed. You can confirm the following
items:
Connection Status, MAC Address, Transmission Speed, IP Address,
Subnet Mask, Default Gateway-
Wireless LAN (RICOH PJ X3351N/WX3351N/WX4241N only)
ItemDefaultCurrent wireless LAN settings are displayed. You can...

Network Application Settings Menu
This section explains the items in the Network Application Settings menu under the Network/USB
Settings menu tab.
You can also specify and check the items in the Network Application Settings menu using Web Image
Monitor. However, the following items are available only on the menu screen.
• [Crestron WebUI User Auth.], [Crestron WebUI User Password], [Crestron WebUI Admin. Auth.], [Crestron WebUI Admin. Password], [Control System IP Address], [Control System IP ID], and...

Crestron RoomViewItemDefaultCrestron RoomViewSpecify whether or not to allow the projector to be controlled and
monitored by Crestron RoomView. For details about Crestron
RoomView, seepage 157 "Controlling and Monitoring the Projector
Using Crestron RoomView".DisableCrestron WebUI User Auth.
Specify whether or not to restrict access to Crestron WebUI with a
password.OffCrestron WebUI User Password
Enter the password for Crestron WebUI user authentication up to 26
characters.(blank)Crestron WebUI...

ItemDefaultPJLink PasswordEnter a password used when setting the PJLink authentication. Up to
32 alphanumeric characters can be used.(blank)Network Application Settings Menu
123  

SecurityItemDefaultAdministrator AuthenticationSpecify whether or not to set administrator authentication. A administrator
password is required to change this setting.
If administrator authentication is set, a password is required for the
following operations:
RICOH PJ X3351N/WX3351N/WX4241N
• Changing [Transmission WEP Key Number], [Network Key],[EAP Type], [Client Certificate User Name], [MS-CHAP v2
User Name], [MS-CHAP v2 Password], [Windows Domain
Name], [Server Certificate Authentication],...

ItemDefaultApplication AuthenticationSpecify whether to enable or disable Application Authentication.OffApplication PasswordEnter the password to be used for Application Authentication.
Up to 32 alphanumeric characters can be used.(blank)Reset Security Settings
Reset the values of the following settings protected by Administrator
Authentication:
RICOH PJ X3351N/WX3351N/WX4241N
[Transmission WEP Key Number], [Network Key], [EAP Type],
[Client Certificate User Name], [MS-CHAP v2 User Name], [MS-
CHAP v2...

Still ImageItemDefaultDisplay EffectSelect the display effect for switching the image.• None
• Push The current image is pushed off by the next image.
• Wipe The current image is wiped off by the next image.
• Fade The current image fades out and the next image fades in.NoneDisplay Interval (sec.)
Enter the slide show switching interval from 5 to 999 seconds.5 seconds
Moving Image
ItemDefaultRepeatSpecify whether or not to repeat video playback.OffDLNA Certification ModeSpecify whether the projector...

Display Status
PJLink
ItemDefaultPJLink ClassDisplay the PJLink class.-
Firmware Version
ItemDefaultNetwork/USB Func. Firmware VersionDisplay the firmware version of the network and USB functions.-
Administrator Authentication
ItemDefaultReset Administrator PasswordReset the administrator password.-Reset PJLink PasswordReset the PJLink password.-Network Application Settings Menu
127  

Display StatusItemInputDisplays the selected input signals.ResolutionDisplays the resolution.
This item appears when you select [Computer 1], [Computer 2], or [HDMI] (RGB signals) as the
input signal.Frequency
Displays the synchronous frequency.
This item appears when you select [Computer 1], [Computer 2], or [HDMI] (RGB signals) as the
input signal.Sync
Displays the synchronous signal polarity.
This item appears when you select [Computer 1] or [Computer 2] as the input signal.Signal Format
Displays the...