Ricoh Projector PJ KU12000 User Manual

61
OUTPUT | Image Warping
PC Mode
H Keystone
V Keystone
H Pincushion
V PincushionPICTUREOUTPUT SETUP
OPTION
Image Warping
Off 20
20
50
50
PC Mode
Enable PC software to control geometry.
H Keystone
Adjust image distortion horizontally and make a squarer image. Horizontal keystone 
is used to correct a keystoned image shape in which the left and right borders of 
the image are unequal in length. This is intended for use with horizontally on-axis 
applications.
V Keystone
Adjust image distortion vertically...

62
H Pincushion
Adjust the pincushion horizontally and make a more square image.
V Pincushion
Adjust the pincushion vertically and make a more square image. 

63
OUTPUT | PIP/PBP
PIP/PBP Enable
Main Source
Sub Source
Swap
Size
LayoutPICTUREOUTPUT SETUP
OPTION
PIP/PBP
On
VGA
DVI-D
Large
PBP, Main Left
PIP/PBP Enable
Toggle between displaying two sources at once (Main and PIP/PBP images) or one 
source only.
Main Source
From the list of active inputs, select one to be used as the main image.
Sub Source
From the list of active inputs, select one to be used as the sub image.
Swap
Press to swap the sources of main window and PIP/PBP window.
 
  Remote control...

64
PIP/PBP LayoutPIP/PBP Size
SmallMediumLarge
PBP, Main TopPPP
PBP, Main Right
PPP
PBP, Main Bottom
PPP
PIP-Bottom RightPPP
PIP-Bottom LeftPPP
PIP-Top Left
PPP
PIP-Top Right
PPP 

65
SETUP
PICTUREOUTPUT SETUP
OPTION
SETUP
Language
Ceiling Mount
Rear Projection
Lens Function
Menu Preferences
Keypad LED Settings
Pin
Closed Captioning
Communications English
AutoOff
On
Off
Language
Select an available language for the OSD display.
Ceiling Mount
Turn the image upside down for ceiling-mounted projection.
Rear Projection
Reverse the image so you can project from behind a translucent screen.
Lens Function
Configure the lens function settings. See Lens Function on page 66.
Menu...

66
SETUP | Lens Function
PICTUREOUTPUT SETUP
OPTION
Lens Function
Focus
Zoom
Lens Shift
Lens Calibration
Lens Lock No
Focus
Adjust focus function on the projected image.
Zoom
Adjust zoom function on the projected image.
Lens Shift
Shift the projected image.
Lens Calibration
Perform calibration and return lens to the center position.
Lens Lock
Select this function to prevent all lens motors from moving.
 `Yes: Lens shift will be locked.
 `No: Lens shift can be used by user. 

67
SETUP | Menu Preferences
PICTUREOUTPUT SETUP
OPTION
Menu Preferences
Menu Transparency
Show Messages 0
On
Menu Transparency
Change OSD menu background to be transparent.
Show Messages
Display status messages on the screen.
SETUP | Pin
PICTURE
OUTPUT SETUP
OPTIONPin Protect
Change PIN Off
Pin
PIN Protect
The PIN (personal identification number) feature allows you to password protect 
your projector. Once you enable the PIN feature, you must enter the PIN before you 
can project an image. (PIN Default :...

68
SETUP | Communications
PICTUREOUTPUT SETUP
OPTION
Communications
LAN
Network
Serial Port Baud Rate
Serial Port Echo
Serial Port Path
Projector Address 19200
Off
RS232
0
LAN
Configure the local area network (LAN) settings.
 `DHCP: Turn the DHCP ON/OFF.
 `IP Address: Select an IP address.
 `Subnet Mask: Select subnet mask number.
 `Default Gateway: Select the default gateway of the network connected to the 
projector.
 `MAC Address: Display the network MAC Address value.
 `Apply: Apply Network settings. 

69
Crestron RoomView Control Tool
Crestron RoomView™ provides a central monitoring station for 250+ control 
systems on a single Ethernet network (more are possible, the number depends 
on the combination of IP ID and IP address). Crestron RoomView monitors 
each projector, including projector’s online status, system power, lamp life, 
network setting and hardware faults, plus any custom attribute as defined by the 
Administrator.
The Administrator can add, delete, or edit room information, contact...

70
3. Edit Attribute
4. Edit Event
For more information, please visit
http://www.crestron.com & www.crestron.com/getroomview.
Network supports Crestron (Room View), AMX (Device Discovery Beacon 
Validation Tool) , PJLink and RS232 control.