Ricoh Projector PJ KU12000 User Manual

51
Main MenuSub Menu / SettingsDefault
OPTION
Light Source Settings
Light Source Mode
Constant Power
Constant PowerConstant LuminanceEco ModeConstant Power Settings0 - 1010
Constant Luminance Settings0 - 107
Current Light SourceLamp 1BothLamp 2Both
Auto SwitchOn Failure OnlyOn Failure OnlyAt Power-UpAfter X HoursAuto Switch Time (Hours)5 - 3000100
Light Source Info
Lamp 1 HoursLamp 2 HoursTotal Projector HoursReset Light Source Hours1/2/Both (Dialog box)
Light SensorLight Sensor...

52
PICTURE
Display Mode
Brightness
Contrast
Sharpness
Color
Tint
Phase
Frequency
Horz Position
Vert PositionPICTUREOUTPUT SETUP
OPTION
PICTURE
Presentation 50
502
50
50
50
50
50
50
Display Mode
There are many factory presets optimized for various types of images.
 `Presentation: For good color and brightness for PC input.
 `Video: For video or TV source.
 `Bright: Maximum brightness for PC input.
 `DICOM SIM: This mode can project a monochrome medical image such as an X 
ray radiography, MRI, etc.
 `2D...

53
Sharpness
Adjust the sharpness of the image.
 `Press the ◄ button to decrease the sharpness.
 `Press the ► button to increase the sharpness.
Color
Adjust a video image from black and white to fully saturated color. The color setting 
applies to video sources only.
 `Press the ◄ button to decrease the color saturation in the image.
 `Press the ► button to increase the color saturation in the image.
Tint
Adjust the color balance of red and green.
 `Press the ◄ button to increase the amount of green in...

54
PICTURE | 3D Display
3D Enable
3D Invert
DLP LinkPICTUREOUTPUT SETUP
OPTION
3D Display
Auto Off
On
3D Enable
Set 3D format. Supports Mandatory 3D formats and frame sequential 3D@120Hz.
 `Auto: When a 3D identifi cation signal is detected, the 3D format is selected 
automatically.
 `Frame Packing: Display 3D signal in “Frame Packing” format.
 `Side by Side: Display 3D signal in “Side-by-Side” format.
 `Top and Bottom: Display 3D signal in “Top and Bottom” format.
 `Frame Sequential: Display 3D signal...

55
PICTURE | Color Matching
Enable
Auto Test Pattern
Red Part of Red
Green Part of Red
Blue Part of Red
Green Part of Green
Red Part of Green
Blue Part of Green
Blue Part of Blue
Red Part of BluePICTUREOUTPUT SETUP
OPTION
Color Matching
On
On
1000 0
0
1000
0
0
1000 0
Enable
You may require a unique color gamut (range) for a single projector or application, 
or you may need to precisely match colors across multiple adjacent displays. Enable 
this feature to allow color matching.
Auto Test Pattern
Set to...

56
Blue Part of Green
Adjust the intensity of the blue color component in green color. This will also affect 
the hue of the color.
Blue Part of Blue
Adjust the intensity of the blue color component in blue color. This will also affect 
the hue of the color.
Red Part of Blue
Adjust the intensity of the red color component in blue color. This will also affect the 
hue of the color.
Green Part of Blue
Adjust the intensity of the green color component in blue color. This will also affect 
the hue of the...

57
PICTURE | Advanced
BrilliantColorTM
White Peaking
Gamma
Color Temperature
Color Space
Color Settings
Color Enhancement
Color Wheel Speed
DynamicBlack
TM
Noise Reduction
PICTUREOUTPUT SETUP
OPTION
Advanced
Bright Look 100
VIdeo Bright Auto
0
2X
Off
BrilliantColor™
Enable the BrilliantColorTM function to enhance the brightness while providing true, 
more vibrant colors in picture.
White Peaking
(Video source only) Increase the brightness of whites that are near 100%.
Gamma
This allows you to choose a...

58
Color Settings
Configure the brightness (gain) and contrast (offset) of an image.
 `Red Gain/Green Gain/Blue Gain/Red Offset/Green Offset/Blue Offset: Adjust the 
gain of the red, green, or blue channel of the image. Adjust the offset of the red, 
green, or blue channel of the image. It will affect the black and white.
 `Reset RGB Gain/Offset: Reset the gain and offset adjustments to factory 
defaults.
Color Enhancement
Adjust to improve the picture quality of pictures with a high saturation of...

59
OUTPUT
Aspect Ratio
Overscan
H Digital Zoom
V Digital Zoom
H Digital Shift
V Digital Shift
Image Warping
PIP/PBPPICTUREOUTPUT SETUP
OPTION
OUTPUT
Auto Off
100
100 50
50
Aspect Ratio
Use this function to choose your desired aspect ratio.
 `Auto: Automatically selects the appropriate display format.
 `4:3: This format is for 4:3 aspect input sources.
 `16:10: This format is for 16:10 aspect input sources, like HDTV and DVD 
enhanced for Wide screen TV.
 `Native: This format displays the original image...

60
H Digital Shift
Shift the display area horizontally if its size has been changed by the Digital Zoom 
setting.
V Digital Shift
Shift the display area vertically if its size has been changed by the Digital Zoom 
setting.
Image Warping
Configure the image warping settings. See Image Warping on pages 61-62.
PIP/PBP
Configure the PIP/PBP settings. See PIP/PBP on pages 63-64.