Ricoh Mp C4500 Instruction Manual

Registering a Protection Code
271
7
Registering a Protection Code to a Group User
APress [System Settings].
BPress [Administrator Tools].
CPress [Address Book: Program / Change / Delete Group].
DCheck that [Program / Change] is selected.
EPress the group key you want to register or enter the registered number us-
ing the number keys.
FPress [Protection].
GPress [Folder Destination] under Protection Object.
HPress [Change] under Protection Code.
IEnter a protection code using the number keys, and then...

Registering Addresses and Users for Facsimile/Scanner Functions
272
7Registering SMTP and LDAP Authentication
SMTP Authentication
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an SMTP server.
To use an SMTP server, you need to program it beforehand.
Important
❒When [Do not Specify] is selected for SMTP Authentication, the User Name and
Password that you have specified in SMTP Authentication of File Transfer
settings applies....

Registering SMTP and LDAP Authentication
273
7
HPress [Change] under Login User Name.
IEnter the login user name, and then press [OK].
JPress [Change] under Login Password.
KEnter the password, and then press [OK].
LEnter the password again to confirm, and then press [OK].
M[OK].
Note
❒To register the name, see Registering Names.
❒You can enter up to 191 characters for the user name.
❒When using POP before SMTP Authentication, you can enter up to 63 char-
acters.
❒You can enter up to 64 characters for...

Registering Addresses and Users for Facsimile/Scanner Functions
274
7
LDAP Authentication
For each user registered in the Address Book, you can register a login user name
and login password to be used when accessing an LDAP server.
To use an LDAP server, you need to program it beforehand. For details, see
LDAP Server Settings, Network Guide.
Important
❒When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program / Change LDAP Server of...

Registering SMTP and LDAP Authentication
275
7
HPress [Change] under Login User Name.
IEnter the login user name, and then press [OK].
JPress [Change] under Login Password.
KEnter the password, and then press [OK].
LEnter the password again to confirm, and then press [OK].
MPress [OK].
Note
❒To register the name, see Registering Names.
❒When [Do not Specify] is selected for LDAP Authentication, the User Name
and Password that you have specified in Program / Change LDAP Server
of Administrator Tools...

Registering Addresses and Users for Facsimile/Scanner Functions
276
7 

277
8. Other User Tools
Initial settings allow you switch the language as well as checking the number of
printed papers by displaying the counter. For details on how to access respective
settings, see Accessing User Tools (System Settings).
Maintenance
This section describes the user tools in Maintenance.
[Maintenance] allows colour drift and gradient correction.
❖Auto Colour Calibration
If a certain colour is strong or the colour of the copy differs from the original,
adjust the yellow, magenta, cyan...

Other User Tools
278
8Changing the Display Language
You can change the language used on the display. English is set as default.
APress [Français].
The language is changed to French.
BPress [Sortie].
The menu appears in French.
Reference
p.3 “Accessing User Tools” 

Enquiry
279
8 Enquiry
The enquiry function lets you check the telephone numbers to contact for re-
pairs, or ordering consumables such as toner. Be sure to contact your service en-
gineer to verify the following:
❖Consumables
 Telephone No. to order
Toner
Staple
 Staple (Centre)
TX Stamp Name
❖Machine Maintenance/Repair
 Telephone No.
 Serial No. of Machine
❖Sales Representative
 Telephone No.
APress [Enquiry].
Enquiry information appears.
BPress [Print Enquiry List]. 

Other User Tools
280
8
CPress the {Start} key.
Enquiry information prints out.
DPress [Exit] twice.
Reference
p.3 “Accessing User Tools”