Ricoh Mp C3000 Service Manual

 
SM 5-53 B230/B237/D042 
Service 
Tables 
Adjusts the threshold of the line position adjustment for BW printing mode in 
stand-by mode. The line position adjus tment is done when the number of 
outputs in BW printing mode reaches the  value specified with this SP and the 
condition of SP2-193-008 or SP2-193-009 is satisfied. 
Page: Stand-By: FC  *ENG [0 to 999 / 100 / 1 page/step] 
007  Adjusts the threshold of the line position adjustment for BW printing mode in 
stand-by mode. The line position adjus...

 
B230/B237/D042 5-54 SM 
Adjust the time threshold for the line position adjustment (Mode a: adjustment 
twice). The timing for line position adj ustment depends on the combinations of 
several conditions. For details, see ‘Aut omatic Line Position Adjustment’ in the 
Detailed Section Descriptions section. 
 
2194   [MUSIC Execution Result]  Line Position Adjustment: Execution Result 
001 Year  *ENG
[0 to 99 /  0 / 1 year/step] 
 002  Month  *ENG
[1 to 12 /  1 / 1 month/step] 
003 Day  *ENG
[1 to 31 /...

 
SM 5-55 B230/B237/D042 
Service 
Tables 
002  TM Sensor Position  *ENG [50 to 500 / 105.5 / 0.1mm/step] 
 
[Music A/D Interval] 
2198 
DFU 
001 ADC Trigger Counter  *ENG
[7.5 to 20 / 10 / 0.1  μm/step] 
 
[Music Error Time Setting]  
2199 
DFU 
001  Error Detection Counter  *ENG
[0.5 to 4 / 2.5 / 0.1 sec /step] 
 
[LD Power] LD Power Control   
2221 
Adjusts the fixed LD power for each line speed and color.   
These SPs are activated only when  SP3-041-002 is set to 0. 
001 Plain: Bk *ENG
002 Plain: M...

 
B230/B237/D042 5-56 SM 
Default: ON) is activated. 
After deactivating Process Control with SP3-041-001, the values in these SP 
modes are used for printing. 
001 Plain: Bk  *ENG
002 Plain: M  *ENG
003 Plain: C *ENG
004 Plain: Y *ENG
005  Thick 1: Bk  *ENG
006  Thick 1: M  *ENG
007  Thick 1: C *ENG
008 Thick 1: Y *ENG
009  Thick 2: Bk  *ENG
010  Thick 2: M *ENG
011  Thick 2: C *ENG
012 Thick 2: Y  *ENG
013 Fine: Bk *ENG
014 Fine: M  *ENG
015 Fine: C *ENG
016 Fine: Y *ENG[0 to 700 / 
550 / 10 –V/step]...

 
SM 5-57 B230/B237/D042 
Service 
Tables 
003  Absolute Humidity  -  [0 to 100 / - / 0.01 g/m3/step] 
 
2302   [Environmental Correction: Transfer]
  
Environmental Correction: Image Transfer Belt Unit 
002 Forced Setting  *ENG Sets the environment condition manually. 
[0 to 5 / 
0 / 1/step] 
0: Automatic  environment  control 
1: LL (Low temperature/ Low humidity) 
2: ML (Middle temperature/ Low humidity) 
3: MM (Middle temperature/ Middle 
humidity) 
4: MH (Middle temperature/ High humidity) 
5: HH...

 
B230/B237/D042 5-58 SM 
002 Threshold 2 *ENG[0 to 350 / 
257 / 1 mm/step] 
Threshold 2  ≤ paper  ≤ Threshold 1: 
Paper is detected as S2 size. 
003 Threshold 3  *ENG[0 to 350 / 
210 / 1 mm/step] 
Threshold 3  ≤ paper  ≤ Threshold 2: 
Paper is detected as S3 size. 
004 Threshold 4  *ENG[0 to 350 / 
148 / 1 mm/step] 
Threshold 4  ≤ paper  ≤ Threshold 3: 
Paper is detected as S4 size. 
Paper  ≤ Threshold 4: 
Paper is detected as S5 size. 
 
2311   [Non Image Area: Bias]   
001 Image Transfer  *ENG Adjusts...

 
SM 5-59 B230/B237/D042 
Service 
Tables 
[0 to 80 /  22 / 1 μ A /step] 
002  Image Transfer: Thick 1  *ENG Not used 
003  Image Transfer: Thick 2 & 
FINE  *ENG Not used 
 
2316   [Power ON: Bias]   
001 Image Transfer  *ENG Adjusts the bias of the image transfer belt 
at warming up mode after a machine has 
been turned on or any door has been 
closed.  
[0 to 80 / 
5 / 1  μA /step] 
 
2326   [Transfer Roller CL: Bias]  Transfer Roller Cleaning: Bias Adjustment 
Positive *ENG
[0 to 5000 / 2000 / 1 V...

 
B230/B237/D042 5-60 SM 
Adjusts the current for the image transfer belt in B/W mode for thick 1 paper. 
Image Transfer: Thick 2 & 
FINE *ENG
[0 to 80 /  12 / 1 μ A] 
003 
Adjusts the current for the image transfer belt in B/W mode for thick 2 paper or 
FINE mode. 
 
2357   [Common: FC: Bias]  Image Transfer Belt: Full Color: Bias Adjustment 
Image Transfer: Plain: Bk  *ENG
[0 to 80 / 20 / 1 μ A] 
001 
Adjusts the current for the image transfe r belt for Black in full color mode for 
plain paper. 
Image...

 
SM 5-61 B230/B237/D042 
Service 
Tables 
Image Transfer: Thick 1: 
C  *ENG
[0 to 80 /  12 / 1 μ A] 
007 
Adjusts the current for the image transfer belt for Cyan in full color mode for 
thick 1 paper. 
Image Transfer: Thick 1: 
Y  *ENG
[0 to 80 /  17 / 1 μ A] 
008 
Adjusts the current for the image transfer belt for Yellow in full color mode for 
thick 1 paper. 
Image Transfer: Thick 2 & 
FINE: Bk  *ENG
[0 to 80 /  12 / 1 μ A] 
009 
Adjusts the current for the image transfe r belt for Black in full...

 
B230/B237/D042 5-62 SM 
001 Image Transfer: Plain  *ENG
[10 to 250 / 70 / 5%/step] 
002  Image Transfer: Thick 1  *ENG
[10 to 250 / 80 / 5%/step] 
003  Image Transfer: Thick 2 & 
FINE  *ENG Not used 
004 Image Transfer: P/M 
Pattern  *ENG[10 to 250 / 
100 / 5%/step] 
P/M Pattern: When doing process control 
or automatic line pos ition adjustment. 
 
[Common: ML]   
2382 
Adjusts the environment coefficient fo r each mode. When the environment is 
detected as ML, SP2351 and SP2357 are mu ltiplied by...