Ricoh Mp C3000 Service Manual

Folder 
SM 17 B793 
B793 
Booklet 
Finisher 
 
6.  Remove a connector [7]. 
 
7.  Remove 2 screws [8].  

Folder 
B793 18  SM 
 
8.  Remove the staple tray [9].   
 
9.  Remove the guide [10]. (2 screws)  

Folder 
SM 19 B793 
B793 
Booklet 
Finisher 
 
10.  Move the stapler unit until its screw come to the hole [11] on the stay. 
 
11.  Remove the screw [12] that holds  the front of the guide plate [13].  

Folder 
B793 20  SM 
 
12.  Remove the screw [14] that holds  the rear of the guide plate. 
 
 
ƒ  Remove the rear side screw through the hole in the stay.  

Folder 
SM 21 B793 
B793 
Booklet 
Finisher 
 
13.  Remove the guide plate [13]. 
 
14.  Remove the staple folding unit [15] (3 screws, 2 connectors).  

Folder 
B793 22  SM 
 
15.  Remove the staple cartridge [16].   
16.  Remove the stapler unit cover [17]. 
 
17.  Remove the stapler drive unit [18].  

Folder 
SM 23 B793 
B793 
Booklet 
Finisher 
Reassembly 
 
1.  Mount the stapler drive unit [1].  
 
2.  Mount the staple folder unit [2]. Do  not tighten the screws [3] at this time.  

Folder 
B793 24  SM 
 
3.  Set the special tool in t he long hole [4] on both units. 
 
4.  Secure the special tool [5] with the knob [6].  

Folder 
SM 25 B793 
B793 
Booklet 
Finisher 
 
5.  Tighten the screws [7] for the stapler folder unit.   
6.  Reassemble the machine.  

Others 
B793 26  SM 
1.4 OTHERS 
1.4.1 MAIN BOARD 
 
1.  Remove the rear cover. 
2.  Remove the main board [A] (
 x 5).