Ricoh Mp C3000 Service Manual
Here you can view all the pages of manual Ricoh Mp C3000 Service Manual. The Ricoh manuals for All in One Printer are available online for free. You can easily download all the documents as PDF.
Page 1261
![Page 1261
Punch Unit
SM 57 B793
B793
Booklet
Finisher
These SP codes adjust th e punch hole alignment:
ƒ SP6128 Adjusts the punch positions in the direction of paper feed.
ƒ SP6129 Adjusts the punch position perpendi cular to the direction of feed.
For more, see Section 5. Service Tables.
2.12.2 PAPER POSITION DETECTION
The paper position sensor slide motor [A] extends and retracts the paper position slide that
holds the paper posit ion sensor [B].
The paper position sensor detec ts the...](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1260.png "Page 1261
Punch Unit
SM 57 B793
B793
Booklet
Finisher
These SP codes adjust th e punch hole alignment:
ƒ SP6128 Adjusts the punch positions in the direction of paper feed.
ƒ SP6129 Adjusts the punch position perpendi cular to the direction of feed.
For more, see Section 5. Service Tables.
2.12.2 PAPER POSITION DETECTION
The paper position sensor slide motor [A] extends and retracts the paper position slide that
holds the paper posit ion sensor [B].
The paper position sensor detec ts the...")
Punch Unit SM 57 B793 B793 Booklet Finisher These SP codes adjust th e punch hole alignment: ƒ SP6128 Adjusts the punch positions in the direction of paper feed. ƒ SP6129 Adjusts the punch position perpendi cular to the direction of feed. For more, see Section 5. Service Tables. 2.12.2 PAPER POSITION DETECTION The paper position sensor slide motor [A] extends and retracts the paper position slide that holds the paper posit ion sensor [B]. The paper position sensor detec ts the...
Page 1262
![Page 1262
Punch Unit
B793 58 SM
2.12.3 PUNCH UNIT MOVEMENT
The punch movement motor [A] extends and retrac ts the punch unit to put it at the correct
position for punching.
The punch movement HP sensor [B] detects the position when it retracts, switches off the
punch movement motor, and stops th e punch unit at its home position.
The punch drive motor [C] fires the punches that punch holes in the paper below.
2.12.4 PUNCH SELECTION AND FIRING
The punch drive motor [A] turns the small, notched...](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1261.png "Page 1262
Punch Unit
B793 58 SM
2.12.3 PUNCH UNIT MOVEMENT
The punch movement motor [A] extends and retrac ts the punch unit to put it at the correct
position for punching.
The punch movement HP sensor [B] detects the position when it retracts, switches off the
punch movement motor, and stops th e punch unit at its home position.
The punch drive motor [C] fires the punches that punch holes in the paper below.
2.12.4 PUNCH SELECTION AND FIRING
The punch drive motor [A] turns the small, notched...")
Punch Unit B793 58 SM 2.12.3 PUNCH UNIT MOVEMENT The punch movement motor [A] extends and retrac ts the punch unit to put it at the correct position for punching. The punch movement HP sensor [B] detects the position when it retracts, switches off the punch movement motor, and stops th e punch unit at its home position. The punch drive motor [C] fires the punches that punch holes in the paper below. 2.12.4 PUNCH SELECTION AND FIRING The punch drive motor [A] turns the small, notched...
Page 1263
![Page 1263
Punch Unit
SM 59 B793
B793
Booklet
Finisher
The timing for 2-hole punching [E] is different from 3-hole punching [F].
When the punch unit is at t he punching position, the punch motor turns until the encoder
detects the starting position for 2-hole or 3-hole punching.
ƒ This is the ‘1’ position in the diagrams (the first diagram is for 2-hole punching, and the second diagram is fo r 3-hole punching).
Then, the punch drive motor turns counter-clo ckwise to the ‘2’ position. This movement...](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1262.png "Page 1263
Punch Unit
SM 59 B793
B793
Booklet
Finisher
The timing for 2-hole punching [E] is different from 3-hole punching [F].
When the punch unit is at t he punching position, the punch motor turns until the encoder
detects the starting position for 2-hole or 3-hole punching.
ƒ This is the ‘1’ position in the diagrams (the first diagram is for 2-hole punching, and the second diagram is fo r 3-hole punching).
Then, the punch drive motor turns counter-clo ckwise to the ‘2’ position. This movement...")
Punch Unit SM 59 B793 B793 Booklet Finisher The timing for 2-hole punching [E] is different from 3-hole punching [F]. When the punch unit is at t he punching position, the punch motor turns until the encoder detects the starting position for 2-hole or 3-hole punching. ƒ This is the ‘1’ position in the diagrams (the first diagram is for 2-hole punching, and the second diagram is fo r 3-hole punching). Then, the punch drive motor turns counter-clo ckwise to the ‘2’ position. This movement...
Page 1264
![Page 1264
Punch Unit
B793 60 SM
The punch hopper full sensor [B] does the following:
ƒ Signals that the hopper is full when it detects the top of the stack of punchouts that
have collected in the hopper.
ƒ Detects when the punch hopper is set properly.](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1263.png "Page 1264
Punch Unit
B793 60 SM
The punch hopper full sensor [B] does the following:
ƒ Signals that the hopper is full when it detects the top of the stack of punchouts that
have collected in the hopper.
ƒ Detects when the punch hopper is set properly.")
Punch Unit B793 60 SM The punch hopper full sensor [B] does the following: ƒ Signals that the hopper is full when it detects the top of the stack of punchouts that have collected in the hopper. ƒ Detects when the punch hopper is set properly.
Page 1265
PAPER FEED UNIT B800
B800 PAPER FEED UNIT PB3000
Page Date Added/Updated/New
None
Page 1266
Page 1267
![Page 1267
SM i B800
PAPER FEED UNIT B800
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ............................................ 1
1.1 REAR CO VER ........................................................................\
...................... 1
1.2 MOTORS AND CLUTCHES ........................................................................\
. 2
1.2.1 LIFT MOTORS ........................................................................\
............. 2
1.2.2 UPPER AND LOWER PAPER FEED...](http://img.usermanuals.tech/thumb/64/98663/w300_mp-c3000-service-manual-1509271621_d-1266.png "Page 1267
SM i B800
PAPER FEED UNIT B800
TABLE OF CONTENTS
1. REPLACEMENT AND ADJUSTMENT ............................................ 1
1.1 REAR CO VER ........................................................................\
...................... 1
1.2 MOTORS AND CLUTCHES ........................................................................\
. 2
1.2.1 LIFT MOTORS ........................................................................\
............. 2
1.2.2 UPPER AND LOWER PAPER FEED...")
SM i B800 PAPER FEED UNIT B800 TABLE OF CONTENTS 1. REPLACEMENT AND ADJUSTMENT ............................................ 1 1.1 REAR CO VER ........................................................................\ ...................... 1 1.2 MOTORS AND CLUTCHES ........................................................................\ . 2 1.2.1 LIFT MOTORS ........................................................................\ ............. 2 1.2.2 UPPER AND LOWER PAPER FEED...
Page 1268
Page 1269
Read This First Safety and Symbols Replacement Procedure Safety ƒ Turn off the main power switch and unplug the machine before beginning any of the replacement procedures in this manual. Symbols Used in this Manual This manual uses the following symbols. : See or Refer to : Screws : Connector : Clip ring : E-ring
Page 1270
