Ricoh Mp C2500 User Guide

Registering Fax Information
143
4
Registering an Own Name
APress [Own Name].
BPress [Own Name].
CEnter your own facsimiles number using the number keys, and then press
[OK].
Registering Fax Header
APress [Fax No.].
BSelect line type to program.
The display differs depending on the optional units installed on the machine.
CEnter your own facsimiles number using the number keys, and then press
[OK].
To enter a + sign or a space, press [+] or [Space]. 

Facsimile Features
144
4
Deleting Fax Information
APress [Facsimile Features].
BPress [Initial Settings].
CPress [Program Fax Information].
DPress [Fax Header], [Own Name], or [Own Fax Number] to delete.
EPress the item you want to delete.
FPress [Backspace] or [Delete All], and then press [OK].
When deleting your own facsimiles number, press [Clear] or the {Clear/Stop}
key, and then press [OK].
G[Exit].
HPress the {User tools/Counter} key. 

Forwarding
145
4 Forwarding
Print documents received and forward to a specified End Receiver. This is useful
if, for example, you are visiting another of f i c e  a n d  w o u l d  l i k e  a  c o p y  o f  y o u r  d o c -
uments to be sent to that office.
You can also specify a “folder” as the forwarding destination.
Important
❒To use this function, set Forwarding under Reception Settings to On (enable).
❒You can select end receivers only from among destinations programmed in
the Address Book. You...

Facsimile Features
146
4
Programming an End Receiver
Important
❒One end receiver can be registered for each special sender. To register two or
more end receivers, use group destination. However, a maximum of 500 des-
tinations can be specified in a group.
APress [Facsimile Features].
BPress [Reception Settings].
CPress [Forwarding].
DPress [On].
If there is an End Receiver already programmed, a receiver name is shown. If
you want to change the receiver, press [Receiver] and proceed to step
E.
To cancel...

Forwarding
147
4
ESpecify an End Receiver using the destination list, and then press [OK].
The receiver name is shown to the right of [Receiver].
Press the key on the left of the display to switch the destination between fax
number, email address, IP-Fax destination, and folder.
Set a folder destination in Address Book Management under Administrator
Tools in the System Settings menu. See “Registering Folders”.
If you have specified a folder for forwarding, you can specify the file format
used for...

Facsimile Features
148
4
Quitting the forwarding function
APress [Facsimile Features].
BPress [Reception Settings].
CPress [Forwarding].
DPress [Off], and then press [OK].
EPress the {User Tools/Counter} key.
Forwarding Mark
You can print a Forwarding Mark on receivers documents that have been for-
warded.
The receiver can distinguish between forwarded and normally received docu-
ments.
This function is not available when memory forwarding is performed to a folder
destination.
Reference
p.149 “Parameter...

Parameter Settings
149
4 Parameter Settings
User Parameters allow you to customize various settings to suit your needs. To
change function settings, set the User Parameter Switches.
❖Switches and Bits
Each User Parameter has a set of switches, and each of the switches consist of
eight bits, whose values are “0” or “1”. The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between “0” and “1”.
Switch 02
❖User Parameter List...

Facsimile Features
150
4
05 2,1 Substitute the reception when the machine 
cannot print (because paper is jammed, all 
paper trays have run out of paper, toner is 
empty, or all paper trays are out of order) 00: Ena-
bled un-
conditio
nally 
(Free)
 01: Ena-
bled 
when 
Own 
Name/
Own 
Fax 
Number 
is re-
ceived
 10: Ena-
bled for 
Closed 
Net-
work 
Code 
match
 11: Disa-
bled 
(Recep-
tion off)-
05 5 Print sheet is limited to that which has high-
est priority.Off On
05 7 Empty tray alert (Paper...

Parameter Settings
151
4
14 1 Long Document Transmission (Well Log) Off On
14 3 Reset when function changed Off On
15 0, 1, 2 Selecting the available paper feed tray. 001: Tray 1
010: Tray 2
011: Tray 3
100: Tray 4
101: Large 
Capacity 
Tray (LCT)-
15 5 Whether or not to select the available paper 
feed tray.Off On
17 2 Whether you need to press [Add] after speci-
fying a destination with the Destination key 
when broadcasting
Not necessaryNecessary
17 3 Whether or not to reset the settings when...

Facsimile Features
152
4
20 5,4,3,2 Reprinting time of stored documents in 
memory that could not be printed using 
LAN-Fax Driver0000:
0 minutes
0001:
1 minutes
0010:
2 minutes
0011:
3 minutes
0100:
4 minutes
0101:
5 minutes
0110:
6 minutes
0111:
7 minutes
1000:
8 minutes
1001:
9 minutes
1010:
10 minutes
1011:
11 minutes
1100:
12 minutes
1101:
13 minutes
1110:
14 minutes
1111:
15 minutes-
21 0 Print results of sending Reception Notice Re-
quest messageOff (print 
only when 
an error oc-
curs)On
21 1...