Ricoh Kr5 Instruction Manual

							269
Changing Additional Settings9
Setting the Beep, Date and Time, and 
Display Language
You can turn the camera operation beep on or off, or change its volume. 
By default, all available items are set to O (On), and the volume level is 
set to [3]. The following six items can be set.
• In-focus
• AE-L (AE Lock operation sound)
•Self-timer
• Remote Control
• One Push File Format (operation sound when [One Push File Format] 
is assigned to the | button)
• Press OK for 1 sec. (operation sound when changing AF point is 
enabled or disabled) 
1Select [Beep] in the [RSet-up 1] menu and press the four-
way controller (5).
The [Beep 1] screen appears.
2Press the four-way controller (3) and use the four-way 
controller (45) to adjust the volume.
Select from six levels. When set to 0, you can turn all the beeps off.
3Use the four-way controller (23) 
to select an item. 
Turn the e-dial to display the [Beep 2] 
screen.
4Use the four-way controller (45) to select O (On) or 
P(Off).
5Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Setting the Beep
Beep
Vo l u m e
In-focus
AE-L
Self-timer
Remote Control
One Push File Format
MENU
12 
						

							270
Changing Additional Settings9You can change the initial date and time settings, and set their display 
formats. Choose [mm/dd/yy], [dd/mm/yy] or [yy/mm/dd] for the date 
display format, and [12h] (12-hour display) or [24h] (24-hour display) for 
the time display format.
Set in [Date Adjustment] of the [R Set-up 1] 
menu (p.266).
1 Setting the Date and Time (p.64)
The date and time selected in “Initial Settings” (p.60) serve as the date and 
time of your present location.
Setting the destination in [World Time] enables you to display the local 
date and time on the monitor when traveling overseas.
1Select [World Time] in the [RSet-up 1] menu and press 
the four-way controller (5).
The [World Time] screen appears.
2Use the four-way controller (45) 
to select X (Destination) or W 
(Hometown) for [Setting the 
Time].
This setting is reflected on the date and 
time that appear in the guide display and 
control panel.
3Press the four-way controller (3).
The selection frame moves to X (Destination setting).
Changing the Date and Time Display
Setting the World Time
MENU
/
00 00:/ //24h
Date Adjustment
Date Format
Date
Time
Settings complete
Cancel/ /201001 01
mmdd yy
World Time
Setting the Time
Destination
London
Hometown
New York
MENU
1600 :
10 00: 
						

							271
Changing Additional Settings9
4Press the four-way controller (5).
The [X Destination] screen appears.
5Use the four-way controller (45) 
to select a destination city.
Turn the e-dial to change the region.
The location, time difference and current 
time of the selected city appear.
6Press the four-way controller (3) to select [DST].
7Use the four-way controller (45) to select O (On) or 
P(Off).
Select O if the destination city uses daylight saving time (DST).
8Press the 4 button.
The destination setting is saved and the camera returns to the [World 
Time] screen.
9Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
• Refer to “List of World Time Cities” (p.272) for cities that can be selected as 
a destination.
• Select W (Hometown) in Step 2 to set the city and DST setting.
•X appears in the guide display and control panel if [Setting the Time] is set 
to X(Destination). (p.24) 
• When you switch [Setting the Time] to X(Destination), the video output 
(p.243) setting changes to the video output format for that city.
Destination
DST London
Cancel
MENU
 +06:0016:00OKOK 
						

							272
Changing Additional Settings9
List of World Time Cities
RegionCityRegionCity
North 
AmericaHonolulu Africa/
West AsiaDakar
Anchorage Algiers
Vancouver Johannesburg
San Francisco Istanbul
Los Angeles Cairo
Calgary Jerusalem
Denver Nairobi
Chicago Jeddah
Miami Tehran
Toronto Dubai
New York Karachi
Halifax Kabul
Central and 
South 
AmericaMexico City Male
Lima Delhi
Santiago Colombo
Caracas Kathmandu
Buenos Aires Dacca
Sao Paulo
East AsiaYangon
Rio de Janeiro Bangkok
EuropeLisbon Kuala Lumpur
Madrid Vientiane
London Singapore
Paris Phnom Penh
Amsterdam Ho chi Minh
Milan Jakarta
Rome Hong Kong
Copenhagen Beijing
Berlin Shanghai
Prague Manila
Stockholm Taipei
Budapest Seoul
Warsaw Tokyo
Athens Guam
Helsinki
Moscow 
						

							273
Changing Additional Settings9 You can change the language in which the menus, error messages, etc. 
are displayed.
The camera supports the following languages: English, French, German, 
Spanish, Portuguese, Italian, Dutch, Danish, Swedish, Finnish, Polish, 
Czech, Hungarian, Turkish, Greek, Russian, Korean, Traditional Chinese, 
Simplified Chinese and Japanese.
Set in [Language/u] of the [RSet-up 1] 
menu (p.266).
1 Setting the Display Language (p.60)
RegionCity
OceaniaPerth
Adelaide
Sydney
Noumea
Wellington
Auckland
Pago Pago
Setting the Display Language
CancelMENUOKOK 
						

							274
Changing Additional Settings9
Adjusting the Monitor and the Menu 
Display
You can set the text size of an item selected on the respective menu 
screens to [Standard] (normal display) or [Large] (magnified display).
Set in [Text Size] of the [R Set-up 1] menu 
(p.266).
Set the length of time that the guides are displayed on the monitor when 
the camera is turned on or the Capture mode is changed. (p.24) 
Select from [3 sec.] (default setting), [10 sec.], [30 sec.] and [Off].
Set in [Guide Display] of the [RSet-up 1] 
menu (p.266).
Setting the Text Size
Setting the Guide Display Time
MENU
1234
English
3sec. Date Adjustment
World Time
Text Size
Guide Display
Status Screen Beep
Cancel OK
OK
StandardLarge
Date Adjustment
World Time
Text Size
Guide Display
Status Screen Beep
MENU
1234
English
Cancel OK
OK
3sec.
10sec.
30sec.
Off 
						

							275
Changing Additional Settings9 Set the initial menu tab displayed on the monitor when the 3 button 
is pressed.
1Select [19. Save Menu Location] in the [A Custom Setting 
3] menu and press the four-way controller (5).
The [19. Save Menu Location] screen appears.
2Use the four-way controller (23) 
to select [Reset Menu Location] 
or [Save Menu Location] and 
press the 4 button.
3Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Setting the Initial Menu Tab Displayed
1 Reset Menu LocationThe [A Rec. Mode 1] menu ([Q Playback 
1] menu in Playback mode) is always 
displayed first. (default setting)
2 Save Menu Location The menu tab last selected is displayed first.
19.
1
2Save Menu LocationReset Menu Location
Save Menu Location
Pressing the menu button
Cancel
MENU
accesses the last used
menu tab
OK
OK 
						

							276
Changing Additional Settings9You can set the display color of the status screen and control panel.
1Select [Status Screen] in the [R Set-up 1] menu and press 
the four-way controller (5).
The [Status Screen] screen appears.
2Use the four-way controller (45)  
to select from six display colors.
3Press the 3 button twice.
The display color of the status screen and control panel are changed.
You can set the Instant Review display settings.
1Select [Instant Review] in the [ARec. Mode 3] menu and 
press the four-way controller (5).
The [Instant Review] screen appears.
2Press the four-way controller (5) 
and use the four-way controller 
(23) to select a display time.
Setting the Status Screen Display
Setting the Display for Instant Review
1/125
5.6
F
MENU
1 Status Screen
Display Color
Instant Review
MENU
Display Time
Histogram
Bright/Dark Area
Enlarge Instant Review
Cancel OKOK
1sec.
3sec.
5sec.
Off 
						

							277
Changing Additional Settings9
3Press the 4 button.
4Use the four-way controller (23) to select [Histogram], 
[Bright/Dark Area] or [Enlarge Instant Review].
5Use the four-way controller (45) to select O or P.
When [Enlarge Instant Review] is set to O (default setting), you can 
magnify the image with the e-dial. (p.223)
6Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
You can adjust the brightness of the monitor. Adjust the settings when the 
monitor is hard to see.
1Select [Brightness Level] in the [R Set-up 2] menu and 
press the four-way controller (5).
The [Brightness Level] screen appears.
2Use the four-way controller (45) 
to adjust the brightness.
You can select from 15 brightness levels.
The value is reset to ±0 when the | 
button is pressed.
3Press the 4 button.
4Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Adjusting the Brightness of the Monitor
MENU
Brightness Level
±0
Cancel OKOK
+2+2 
						

							278
Changing Additional Settings9You can adjust the color of the monitor.
1Select [LCD Color Tuning] in the [RSet-up 2] menu and 
press the four-way controller (5).
The [LCD Color Tuning] screen appears.
2Adjust the color.
Seven levels (225 patterns) are available 
on the G-M and B-A axes.
Available operations
3Press the 4 button.
4Press the 3 button.
The screen that was displayed before selecting the menu appears again.
Adjusting the Color of the Monitor
Four-way controller (23) Adjusts the tone of the colors between green (G) 
and magenta (M).
Four-way controller (45) Adjusts the tone of the colors between blue (B) 
and amber (A).
| button Resets the adjustment value.
E-dial Displays a saved image in the background so 
you can adjust the color while viewing the 
image. This is useful for matching the color of 
the monitor with that of a computer.
MENU
G G
B BA
AA
M M
±0 ±0
±0
OKOK Cancel
LCD Color TuningLCD Color Tuning