Ricoh Kr5 Instruction Manual

279
Changing Additional Settings9
Setting the Folder/File Number
You can select a naming system of the folder for storing images.
Set in [Folder Name] of the [RSet-up 2] 
menu (p.266).
Creates a new folder on an SD Memory Card. A folder is created with the 
number following the number of the folder currently being used.
1Select [Create New Folder] in the [R Set-up 2] menu and 
press the four-way controller (5).
The [Create New Folder] screen appears.
Changing the Naming System of the Folder
DateThe two...

280
Changing Additional Settings9
2Use the four-way controller (23) 
to select [Create folder] and 
press the 4 button.
A folder with a new number is created.
You can select a method for assigning the file number of an image when 
saved to a new folder. Set in [File No.] in [Memory] (p.288) of the [A Rec. 
Mode 4] menu. 
Only one folder can be created using this operation. Multiple empty folders 
cannot be created consecutively.
Selecting the File Number Setting
OThe file number of the last image saved...

281
Changing Additional Settings9
Selecting the Power Settings
You can set the camera to turn off automatically if unused after a certain 
length of time. Select from [1 min.] (default setting), [3 min.], [5 min.], 
[10 min.], [30 min.] or [Off].
Set in [Auto Power Off] of the [RSet-up 3] 
menu (p.267).
Setting the Auto Power Off Function
• The Auto Power Off function does not work in the following situations.
- when the Live View image is displayed
- when the slideshow is played back
- when the camera...

282
Changing Additional Settings9Sets the type of AA batteries used in the camera. The default setting is 
[Auto-detect].
1Select [AA Battery Type] in the [RSet-up 3] menu and 
press the four-way controller (5).
The [AA Battery Type] screen appears.
2Use the four-way controller (23) 
to select a battery type and press 
the 4 button.
When set to [Auto-detect], the camera will 
automatically detect the type of batteries 
being used.
3Press the 3 button.
The screen that was displayed before selecting the...

283
Changing Additional Settings9
Setting the Photographer Information
The camera type, shooting conditions and other information are 
automatically embedded in captured images in the Exif data format. You 
can embed photographer information in this Exif.
1Select [Copyright Information] in the [R Set-up 2] menu 
and press the four-way controller (5).
The [Copyright Information] screen appears.
2Use the four-way controller (45) 
to select O or P.
3Use the four-way controller (23) to select [Photographer]...

284
Changing Additional Settings9
4Enter the text.
Up to 32 single-byte 
alphanumeric characters 
and symbols can be 
entered.
Available operations
5After entering the text, move the 
text selection cursor to [Finish] 
and press the 4 button.
The camera returns to the [Copyright 
Information] screen.
6Use the four-way controller (23) to select [Copyright 
Holder] and enter the text in the same way as 
[Photographer].
7Press the 3 button twice.
The screen that was displayed before selecting the menu...

285
Changing Additional Settings9
Setting the DPOF Settings
You can order conventional photograph prints by taking the SD Memory 
Card with recorded images to a store for printing.
DPOF (Digital Print Order Format) settings allow you to specify the 
number of copies and whether to imprint the date.
1Press the four-way controller (3) in Playback mode.
The playback mode palette appears.
2Use the four-way controller (2345) to select r(DPOF) 
and press the 4 button.
The screen to select how to change the...

286
Changing Additional Settings9
5Use the four-way controller (23) to select the number of 
copies.
You can set up to 99 copies.
K appears at the top right of the screen for images with DPOF settings. 
To cancel the DPOF settings, set the number of copies to [00].
6Turn the e-dial to select O or P 
for printing the date.
Repeat Steps 4 to 6 to make DPOF 
settings for other images (up to 999).
7Press the 4 button.
The DPOF settings for the selected image is saved and the camera 
returns to Playback...

287
Changing Additional Settings9
Correcting Defective Pixels in the 
CMOS Sensor (Pixel Mapping)
Pixel Mapping is a function for mapping out and correcting defective pixels 
in the CMOS sensor.
1Select [Pixel Mapping] in the [RSet-up 4] menu and press 
the four-way controller (5).
The [Pixel Mapping] screen appears.
2Press the four-way controller (2) 
to select [Pixel Mapping] and 
press the 4 button.
Defective pixels are mapped and 
corrected, and the screen that was 
displayed before selecting the...

288
Changing Additional Settings9
Selecting Settings to Save in the 
Camera (Memory)
You can select which function settings to save when the camera is turned 
off. The following function settings can be saved.
1Select [Memory] in the [A Rec. Mode 4] menu and press 
the four-way controller (5).
The [Memory 1] screen appears.
2Use the four-way controller (23) 
to choose an item.
Turn the e-dial to display the [Memory 2] 
screen.
3Use the four-way controller (45) to select O or P.
4Press the 3 button...