Ricoh Kr5 Instruction Manual

259
Processing Images8
Developing RAW Images
You can convert captured RAW files into JPEG files.
1Select a RAW image in Playback mode.
2Press the four-way controller (3).
The playback mode palette appears.
3Use the four-way controller (2345) to select h(RAW 
Development) and press the 4 button.
The screen to select a development method is displayed.
4Use the four-way controller (23) 
to select [Developing a Single 
Image] and press the 4 button.
The parameters recorded in the image file 
appear.
You can...

260
Processing Images8
5Press the 4 button.
The save confirmation screen appears.
6Use the four-way controller (23) 
to select [Save as] and press the 
4 button.
The RAW image is developed and saved 
as a new image.
7Use the four-way controller (23) 
to select [Continue] or [Exit].
Select [Continue] to edit other images.
8Press the 4 button.
If you select [Continue] in Step 7, the screen for selecting the parameter 
in Step 4 appears again.
You can develop multiple RAW images with the same settings....

261
Processing Images8
3Press the M button.
The development confirmation screen 
appears.
4Use the four-way controller (23) 
to select [Develop images as 
shot] or [Develop images with 
modified settings].
To change parameters, select [Develop 
images with modified settings]. For 
details, refer to “Specifying the 
Parameters” (p.262).
The screen to select a parameter appears.
5Use the four-way controller 
(2345) to set [Recorded 
Pixels] and [Quality Level].
6Press the 4 button.
The save confirmation...

262
Processing Images8Specify the parameters for developing RAW images.
The following parameters can be changed.
*1 This cannot be set for RAW files taken in Multi-exposure mode.
*2 This can be selected only when a compatible lens is attached. (p.211)
1Press the four-way controller 
(23) in Step 4 on p.259 to 
choose the parameter you want 
to change.
Specifying the Parameters
ParameterValuePage
Recorded PixelsE (4288×2848)/J (3936×2624)/
P (3072×2048)/i (1728×1152)p.192
Quality LevelC (Best) / D...

263
Processing Images8
2Use the four-way controller (45) to change the value.
Use the four-way controller (5) to display the setting screen for White 
Balance and Custom Image.
3Press the 4 button.
The save confirmation screen appears.
4Use the four-way controller (23) to select [Save as] and 
press the 4 button.
The RAW image is developed and saved as a new image.
• You cannot save the background image and use Digital Preview with White 
Balance and Custom Image.
• When the white balance is set to K...

Memo264 

9Changing Additional 
Settings
This chapter describes how to change additional settings.
How to Operate the Set-up Menu ...................... 266
Formatting an SD Memory Card  ....................... 268
Setting the Beep, Date and Time, and Display 
Language ............................................................ 269
Adjusting the Monitor and the Menu Display  .. 274
Setting the Folder/File Number  ......................... 279
Selecting the Power Settings  ............................ 281
Setting...

266
Changing Additional Settings9
How to Operate the Set-up Menu
Perform general settings related to the camera in the [R Set-up] menu.
Perform the following settings in the [RSet-up 1-4] menus.
Press the 3 button in Capture/Playback mode and use the four-way 
controller (45) or e-dial to display the [R Set-up 1-4] menus.
For details on how to use the menus, refer to “Using the Menus” (p.37).
Set-up Menu Setting Items
MenuItemFunctionPage
R1Language/uChanges the language in which menus and 
messages...

267
Changing Additional Settings9
R2Create New FolderCreates a new folder on the SD Memory 
Card.p.279
Copyright 
InformationSets the photographer and copyright 
information embedded in Exif.p.283
R3Auto Power OffSets the time until the camera turns off 
automatically.p.281
AA Battery TypeSelects the type of AA batteries used for 
the camera.p.282
Reset Resets all settings. p.310
R4Pixel MappingMaps out and corrects any defective pixels 
in the CMOS sensor.p.287
Dust AlertDetects dust adhering to the...

268
Changing Additional Settings9
Formatting an SD Memory Card
Use this camera to format (initialize) an SD Memory Card that is unused 
or has been used on other cameras or digital devices.
Formatting deletes all the data saved on the SD Memory Card.
1Select [Format] in the [RSet-up 4] menu and press the 
four-way controller (5).
The [Format] screen appears.
2Press the four-way controller (2) 
to select [Format].
3Press the 4 button.
Formatting starts.
When formatting is completed, the screen 
that was...