Ricoh Gr 1 Instruction Manual
Here you can view all the pages of manual Ricoh Gr 1 Instruction Manual. The Ricoh manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 131
6 Appendices 129 Miscellaneous ProblemCause SolutionPage Cannot insert memory card. Card is not in correct orientation. Insert in correct orientation.P. 23 Camera controls have no effect. Battery is exhausted. Charge the battery.P. 26 Camera malfunction. Turn camera off and then on again.P. 28 Remove and reinsert the battery. P. 23 Date is incorrect. Clock is not set correctly. Set clock to correct date and time.P. 30 Date has been reset. Battery was removed. If the battery is removed for more than...
Page 132
6 Appendices 130 Specifications Camera Effective pixelsApproximately 16.2 million pixels Image sensor APS-C CMOS (approximately 16.9 million total pixels) Lens Focal length 18.3mm (equivalent to 28 mm on a 35-mm camera) Aperture (f-number) f/2.8 - f/16 Focus range (from lens) Approx. 30 cm to ∞ (from the front edge of the lens) Approx. 10cm to ∞ (Macro shooting, from the front edge of the lens) Construction 7 elements in 5 groups (2 aspherical lens elements with 2 surfaces) Focus modes Multi AF...
Page 133
6 Appendices 131 Image size (pixels)Still images q (16 MB equivalent) 4928 × 3264, 4352 × 3264, 3264 × 3264 r (10 MB equivalent) 3936 × 2608, 3488 × 2608, 2608 × 2608 s (5 MB equivalent) 2912 × 1936, 2592 × 1936, 1936 × 1936 u (1 MB equivalent) 1280 × 864, 1152 × 864, 864 × 864 Clip movie file 1920 × 1080, 1280 × 720, 640 × 480 Movies 1920 × 1080, 1280 × 720, 640 × 480 Recording Media SD/SDHC memory card, SDXC memory card (UHS-I), Eye-Fi card (X2 series), internal memory (approx. 54 MB)...
Page 134
6 Appendices 132 AC-U1 USB power adapter Power SupplyAC 100 - 240 V (50/60 Hz), 0.2 A Output voltage DC 5.0 V, 1000 mA Operating temperature 10°C to 40°C Dimensions (W × H × D) 42.5 mm × 22 mm × 66.5 mm (excluding Power plug) Weight Approx. 40 g (excluding Power plug) DB-65 rechargeable battery (Lithium-Ion battery) Nominal voltage3.6V Rated capacity 1250 mAh (Min.), 1275 mAh, (Typ.) Operating temperature 0°C to 40°C Dimensions (W × H × D) 35.3 × 40.3 × 9.4 mm Weight Approx. 27 g
Page 135
6 Appendices 133 Storage Capacity The following table shows the approximate number of images and record- ing time (in seconds) that can be recorded in the internal memory and onto a memory card in various formats. FormatInternal memory 1 GB 2 GB4 GB8 GB16 GB 32 GB Still images o 3:22 39791553176241257 4:3 2 39791553176241257 1:1 2 39791553176241257 q 3:26 12124648198219353899 4:3 7 137278544111121884408 1:1 10 181368719146828925825 r 3:210 187382746152229996041 4:3 11 211429839171233746796 1:1 15...
Page 136
6 Appendices 134 Optional Accessories Conversion lens, hood, and adapter Remove the ring cap before attaching a conversion lens (GW-3) or the lens hood and adapter (GH-3). Removal Turn the camera off and rotate the cap counterclockwise until it can be re- moved. Attachment With the camera turned off, align the mark - ing on the ring cap () with the marking on the camera body (), and turn the ring cap clockwise until it clicks. Note...
Page 137
6 Appendices 135 External Flash An optional GF-1 TTL flash unit can be connected to the camera hot shoe and used as a TTL auto exposure flash. 1 Close the flash cover. 2 Remove the hot shoe cover from the hot shoe of the camera. 3 Turn the camera and the optional flash unit off and attach the flash to the camera hot shoe. 4 Turn the flash and camera on. Caution ------------------------------------------------------------------------\ ------------------------------- • Do not raise the built-in flash...
Page 138
6 Appendices 136 Other Flash Units 1 Attach the flash unit to the hot shoe. 2 Turn on the camera, turn the mode dial to Av, TAv, or M, and set the aperture. 3 Set the ISO sensitivity to a value other than [Auto] or [AUTO-HI]. 4 Turn on the external flash, set it to Auto, and set the aperture and ISO sensitivity to the same values on the camera. Caution ------------------------------------------------------------------------\ ------------------------------- • Use only flash units with one signal...
Page 139
6 Appendices 137 Using the Camera Abroad Using the AC-U1 USB Power Adapter and BJ-6 Battery Charger These products are for use with currents of 100–240 V and 50 or 60 Hz. Before travelling, purchase a travel adapter for connection to the type of outlets used at your destination. Do not use these products with electrical trans- formers, as this could damage the camera. Warranty This product was manufactured for use in the country of purchase, and the warranty is not valid in other countries. Should the...
Page 140
6 Appendices 138 Precautions for Use Camera • This product was manufactured for use in the country of purchase, the warranty is not valid in other countries. Should the product fail or malfunction while out of the country, the manufacturer assumes no responsibility for servicing the product locally or bearing any expenditure incurred thereby. • Do not drop the camera or subject it to physical shocks. When carrying the camera, be careful that it does not strike other objects....