Ricoh Gr 1 Instruction Manual
Here you can view all the pages of manual Ricoh Gr 1 Instruction Manual. The Ricoh manuals for Camera are available online for free. You can easily download all the documents as PDF.
Page 91
![Page 91
2
Playback Functions
89
Correcting Skewed Images
Correct images of rectangular objects such as message boards and business
cards shot at an angle so that the images appear as if they were shot from
the front.
1 Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2 Select [Skew Correct Mode] and then press the $ button.
A message appears to indicate processing is being performed, and then up
to five areas recognized as correction targets are...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-90.png "Page 91
2
Playback Functions
89
Correcting Skewed Images
Correct images of rectangular objects such as message boards and business
cards shot at an angle so that the images appear as if they were shot from
the front.
1 Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2 Select [Skew Correct Mode] and then press the $ button.
A message appears to indicate processing is being performed, and then up
to five areas recognized as correction targets are...")
2 Playback Functions 89 Correcting Skewed Images Correct images of rectangular objects such as message boards and business cards shot at an angle so that the images appear as if they were shot from the front. 1 Display the image to correct in playback mode and then press the MENU/OK button. The [Playback] menu appears. 2 Select [Skew Correct Mode] and then press the $ button. A message appears to indicate processing is being performed, and then up to five areas recognized as correction targets are...
Page 92
![Page 92
2
Playback Functions
90
Correcting Brightness and Contrast (Level Compensa-
tion)
You can correct the brightness and contrast of shot still images.
1 Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2 Select [Level Compensation] and then press the $ button.
3 Select [AUTO] or [MANUAL] and then press the $ button.
The original image is displayed on the top left, and the corrected image on
the right.
If you select a file that cannot be...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-91.png "Page 92
2
Playback Functions
90
Correcting Brightness and Contrast (Level Compensa-
tion)
You can correct the brightness and contrast of shot still images.
1 Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2 Select [Level Compensation] and then press the $ button.
3 Select [AUTO] or [MANUAL] and then press the $ button.
The original image is displayed on the top left, and the corrected image on
the right.
If you select a file that cannot be...")
2 Playback Functions 90 Correcting Brightness and Contrast (Level Compensa- tion) You can correct the brightness and contrast of shot still images. 1 Display the image to correct in playback mode and then press the MENU/OK button. The [Playback] menu appears. 2 Select [Level Compensation] and then press the $ button. 3 Select [AUTO] or [MANUAL] and then press the $ button. The original image is displayed on the top left, and the corrected image on the right. If you select a file that cannot be...
Page 93
![Page 93
2
Playback Functions
91
Examples of Correction ------------------------------------------------------------------------\
------------
Adjusting the Overall Brightness
• Move the mid-point to the left to increase the overall brightness,
and move it to the right to increase the overall darkness.
Correcting an Overexposed or Underexposed Image • If the image is overexposed, move the left side point to the right
until it lines up with the left edge of the histogram.
• If the image is...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-92.png "Page 93
2
Playback Functions
91
Examples of Correction ------------------------------------------------------------------------\
------------
Adjusting the Overall Brightness
• Move the mid-point to the left to increase the overall brightness,
and move it to the right to increase the overall darkness.
Correcting an Overexposed or Underexposed Image • If the image is overexposed, move the left side point to the right
until it lines up with the left edge of the histogram.
• If the image is...")
2 Playback Functions 91 Examples of Correction ------------------------------------------------------------------------\ ------------ Adjusting the Overall Brightness • Move the mid-point to the left to increase the overall brightness, and move it to the right to increase the overall darkness. Correcting an Overexposed or Underexposed Image • If the image is overexposed, move the left side point to the right until it lines up with the left edge of the histogram. • If the image is...
Page 94
![Page 94
2
Playback Functions
92
Correcting the White Balance
You can correct the color tones of still images.
1 Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2 Select [White Balance Compensation] and then press the $ button.
The [White Balance Compensation] screen appears.
3 Use the !"#$ buttons to adjust the
positions of the points.
To reset the white balance, press the r but-
ton. Pressing the r button again cancels
correction.
If you...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-93.png "Page 94
2
Playback Functions
92
Correcting the White Balance
You can correct the color tones of still images.
1 Display the image to correct in playback mode and then press
the MENU/OK button.
The [Playback] menu appears.
2 Select [White Balance Compensation] and then press the $ button.
The [White Balance Compensation] screen appears.
3 Use the !\"#$ buttons to adjust the
positions of the points.
To reset the white balance, press the r but-
ton. Pressing the r button again cancels
correction.
If you...")
2 Playback Functions 92 Correcting the White Balance You can correct the color tones of still images. 1 Display the image to correct in playback mode and then press the MENU/OK button. The [Playback] menu appears. 2 Select [White Balance Compensation] and then press the $ button. The [White Balance Compensation] screen appears. 3 Use the !"#$ buttons to adjust the positions of the points. To reset the white balance, press the r but- ton. Pressing the r button again cancels correction. If you...
Page 95
![Page 95
2
Playback Functions
93
Caution ------------------------------------------------------------------------\
-------------------------------
• Some images may not be able to be corrected properly.
• If you perform color moire correction, color loss or color bleeding may occur.
Developing RAW Files
Convert RAW files into JPEG format and then save them as new files. You
can configure settings such as the white balance and effect, and then save
the files.
1 Display a RAW image in playback mode and...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-94.png "Page 95
2
Playback Functions
93
Caution ------------------------------------------------------------------------\
-------------------------------
• Some images may not be able to be corrected properly.
• If you perform color moire correction, color loss or color bleeding may occur.
Developing RAW Files
Convert RAW files into JPEG format and then save them as new files. You
can configure settings such as the white balance and effect, and then save
the files.
1 Display a RAW image in playback mode and...")
2 Playback Functions 93 Caution ------------------------------------------------------------------------\ ------------------------------- • Some images may not be able to be corrected properly. • If you perform color moire correction, color loss or color bleeding may occur. Developing RAW Files Convert RAW files into JPEG format and then save them as new files. You can configure settings such as the white balance and effect, and then save the files. 1 Display a RAW image in playback mode and...
Page 96
![Page 96
2
Playback Functions
94
Note ------------------------------------------------------------------------\
-----------------------------------
• The settings that were set at the time of shooting are initially selected.
• [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shoot-
ing.
• For [Dynamic Range Compensation] and [Noise Reduction], select from [Off ], [Weak], [Medium], and
[Strong].
Viewing Images with an AV Device
You can connect the...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-95.png "Page 96
2
Playback Functions
94
Note ------------------------------------------------------------------------\
-----------------------------------
• The settings that were set at the time of shooting are initially selected.
• [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shoot-
ing.
• For [Dynamic Range Compensation] and [Noise Reduction], select from [Off ], [Weak], [Medium], and
[Strong].
Viewing Images with an AV Device
You can connect the...")
2 Playback Functions 94 Note ------------------------------------------------------------------------\ ----------------------------------- • The settings that were set at the time of shooting are initially selected. • [Multi-P AUTO] or [Manual] of [White Balance] can only be selected if it was set at the time of shoot- ing. • For [Dynamic Range Compensation] and [Noise Reduction], select from [Off ], [Weak], [Medium], and [Strong]. Viewing Images with an AV Device You can connect the...
Page 97
![Page 97
2
Playback Functions
95
Caution ------------------------------------------------------------------------\
-------------------------------
• The picture display is off while the camera is connected with an AV cable or HDMI cable.
• The audio of the video is output from the AV device. Adjust the volume on the AV device.
• The white saturation display is off while the camera is connected with an HDMI cable.
Note ------------------------------------------------------------------------\...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-96.png "Page 97
2
Playback Functions
95
Caution ------------------------------------------------------------------------\
-------------------------------
• The picture display is off while the camera is connected with an AV cable or HDMI cable.
• The audio of the video is output from the AV device. Adjust the volume on the AV device.
• The white saturation display is off while the camera is connected with an HDMI cable.
Note ------------------------------------------------------------------------\...")
2 Playback Functions 95 Caution ------------------------------------------------------------------------\ ------------------------------- • The picture display is off while the camera is connected with an AV cable or HDMI cable. • The audio of the video is output from the AV device. Adjust the volume on the AV device. • The white saturation display is off while the camera is connected with an HDMI cable. Note ------------------------------------------------------------------------\...
Page 98
![Page 98
2
Playback Functions
96
Setting DPOF for Multiple Still Images
Specify multiple images and the number of copies from thumbnail view.
1 Press the Y button in playback mode.
The screen changes to 20-frame view.
2 Select [DPOF] in the [Playback] menu and then press the $
button.
3 Use the #$ buttons to select a still
image to print and then use the !"
buttons to specify the number of
copies.
A symbol indicating the DPOF setting ap -
pears.
To cancel the setting, specify [0] for the num-
ber of...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-97.png "Page 98
2
Playback Functions
96
Setting DPOF for Multiple Still Images
Specify multiple images and the number of copies from thumbnail view.
1 Press the Y button in playback mode.
The screen changes to 20-frame view.
2 Select [DPOF] in the [Playback] menu and then press the $
button.
3 Use the #$ buttons to select a still
image to print and then use the !\"
buttons to specify the number of
copies.
A symbol indicating the DPOF setting ap -
pears.
To cancel the setting, specify [0] for the num-
ber of...")
2 Playback Functions 96 Setting DPOF for Multiple Still Images Specify multiple images and the number of copies from thumbnail view. 1 Press the Y button in playback mode. The screen changes to 20-frame view. 2 Select [DPOF] in the [Playback] menu and then press the $ button. 3 Use the #$ buttons to select a still image to print and then use the !" buttons to specify the number of copies. A symbol indicating the DPOF setting ap - pears. To cancel the setting, specify [0] for the num- ber of...
Page 99
![Page 99
2
Playback Functions
97
Selecting the Images to Transfer
When using an Eye-Fi card, you can transfer just selected images.
1 Set [Eye-Fi Connection Settings] in the [Setup] menu to [On
(Selected)].
2 Turn the power off and then back on.
3 Select [Eye-Fi Transfer Selected Images] in the [Playback] menu
and then press the $ button.
The screen changes to 20-frame view.
4 Use the #$ buttons to select an
image to transfer and then press the
MENU/OK button.
5 Press the Fn2 button.
The [Select Image Size]...](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-98.png "Page 99
2
Playback Functions
97
Selecting the Images to Transfer
When using an Eye-Fi card, you can transfer just selected images.
1 Set [Eye-Fi Connection Settings] in the [Setup] menu to [On
(Selected)].
2 Turn the power off and then back on.
3 Select [Eye-Fi Transfer Selected Images] in the [Playback] menu
and then press the $ button.
The screen changes to 20-frame view.
4 Use the #$ buttons to select an
image to transfer and then press the
MENU/OK button.
5 Press the Fn2 button.
The [Select Image Size]...")
2 Playback Functions 97 Selecting the Images to Transfer When using an Eye-Fi card, you can transfer just selected images. 1 Set [Eye-Fi Connection Settings] in the [Setup] menu to [On (Selected)]. 2 Turn the power off and then back on. 3 Select [Eye-Fi Transfer Selected Images] in the [Playback] menu and then press the $ button. The screen changes to 20-frame view. 4 Use the #$ buttons to select an image to transfer and then press the MENU/OK button. 5 Press the Fn2 button. The [Select Image Size]...
Page 100
![Page 100
2
Playback Functions
98
Note ------------------------------------------------------------------------\
-----------------------------------
• You can access the screen in step 6 by pressing the Effect button in the single-frame view of the
playback mode, and transfer the displayed image.](http://img.usermanuals.tech/thumb/64/104006/w300_gr-1-instruction-manual-1516807141_d-99.png "Page 100
2
Playback Functions
98
Note ------------------------------------------------------------------------\
-----------------------------------
• You can access the screen in step 6 by pressing the Effect button in the single-frame view of the
playback mode, and transfer the displayed image.")
2 Playback Functions 98 Note ------------------------------------------------------------------------\ ----------------------------------- • You can access the screen in step 6 by pressing the Effect button in the single-frame view of the playback mode, and transfer the displayed image.