Ricoh Gr 1 Instruction Manual

4
Menus
119
Menu optionSettingsPage
C-AF Continuous Setting
Off , AF Priority, Shutter Priority P. 54
AEL/AFL Lock Keep Setting
Off , On P. 54
One Press M Mode
Aperture Priority , Shttr Priority, Program P. 42
Restore	Defaults	[Key	Custom	Options] — P. 121 

4
Menus
120
Setup Menu
Use	this	menu	 to	set	 the	 general	 operations	 of	
the camera.
Menu option SettingsPage
Format	[Card] — P. 25
Format	[Internal	Memory] — —
Reset File Number — P. 112
Change File Name R0 P. 111
Copyright notice — P. 113
LCD Brightness
Auto , Manual P. 109
Operation sounds
All , Shutter Sounds P. 111
Volume Settings
Off, Low, Medium, High P. 111
Auto Power Off
Off, 1 to 30 Min. (5 Min.) P. 29
Sleep Mode
Off , 1 to 30 Min. P. 29
LCD Auto Dim
On , Off P. 29
Power Button Lamp
On , Off...

4
Menus
121
Menu optionSettingsPage
LCD Confirmation Time
Off, 0.5 Sec., 1 Sec., 2 Sec., 3 Sec., Hold P. 33
Grid Guide Display Options
Grid 1, Grid 2, Grid 3 P. 110
DISP. Button Display Setting Use DISP. Screen, Graphic Display, Information Display, 
Grid Guide, Level Indicator, Histogram P. 110
Information Display Mode
On, Off P. 42
Fn Button Settings
On , Off P. 108
Auto Rotate
On , Off P. 37
White Saturation Display
On, Off P. 22
One	Press	Zoom	Ratio
4×, 8×, 16× P. 82
Target	Zoom	Play
On , Off P. 82...

5
Downloading Images to Your Computer
122
5 Downloading Images to Your Computer
Using Images on a Computer
You	can	transfer	 recorded	 still	images	 and	movies	 to	a	computer	 by	con-
necting	 the	camera	 to	the	 computer	 with	a	USB	 cable.	 You	can	also	 use	the	
SILKYPIX	 Developer	 Studio	3.0	LE	for	 PENTAX	 RICOH	IMAGING	 software	sup-
plied with the camera to convert RAW files.
The following are the computer system requirements for connecting the 
camera to the computer and using the supplied...

5
Downloading Images to Your Computer
123
Saving Images to PC
Use	the	supplied	USB	cable	to	connect	the	camera	to	a	computer.
1 Turn off the camera.
2 Open the terminal cover, and connect 
one end of the USB cable to the USB/
AV OUT terminal on the camera and 
the other end to the computer.
The camera turns on and “Connecting to 
PC…..” appears on the monitor for 10 sec.
The camera is recognized by the computer as 
a removable disk.
The file of the memory card is displayed when the memory card is set....

5
Downloading Images to Your Computer
124
Installing the Software
The supplied CD contains the SILKYPIX	Developer	Studio	3.0	LE	for	 PENTAX	
RICOH	 IMAGING	 software.	You	can	use	SILKYPIX	 Developer	 Studio	to	convert	
and adjust the color of RAW files and save the file in JPEG or TIFF format.
 Note  ------------------------------------------------------------------------\
-----------------------------------
•	If the operating system of the computer has multiple user accounts, log in with administrator...

6
Appendices
125
6 Appendices
Trouble Shooting
Error messages
If an error message is displayed, take the steps listed below.
Error messageSolutionPage
Insert card No memory card inserted. Insert card. P. 23
Set camera clock. Camera clock not set. Set camera clock. P. 30
File Number Over Limit The file number limit has been exceeded. Reset the file numbers or use an-
other card. P. 112
Unmatched File The camera cannot display this file. Check the file contents on your computer, 
and then delete the file....

6
Appendices
126
Camera Troubleshooting
Power Supply
ProblemCause SolutionPage
The camera does not turn on. Battery is exhausted or not inserted. Correctly insert the battery or charge 
the battery.P. 23 
P. 26
Battery is incompatible. Use a compatible battery.—
Battery is not inserted in correct ori-
entation. Insert in correct orientation.
P. 23
The camera turns off 
during use. Camera has turned off automatically to 
save power. Turn the camera back on.
P. 28
Battery is exhausted. Charge the...

6
Appendices
127
Shooting
ProblemCause SolutionPage
No picture is taken when shut-
ter release button is pressed. Battery is exhausted.
Charge the battery.P. 26
Camera is off or not in shooting mode. Press POWER button to turn camera on, 
or press 6 to select shooting mode.P. 28
Memory card is not formatted. Format card.P. 25
Memory card is full. Load a new card, or delete unwanted 
files.P. 83
Memory card has reached end of work -
ing life. Insert new card.
—
Flash is charging. Wait until the Auto...

6
Appendices
128
ProblemCause SolutionPage
Photos are too dark. Subject is poorly lit. Open the flash.P. 69
Picture display is too dark. Adjust picture display brightness.P. 109
Colors are unnatural. Camera unable to adjust white balance 
for shooting conditions using auto white 
balance. Include white object in photo or choose 
another white balance option.
P. 59
Picture display brightness 
changes during focusing. Ambient lighting is poor or differs from 
that used for autofocus. This is normal and...