Ricoh Aficio MP2000LN User Manual

Administrator Tools
63
2
Entering the search base
ASelect [Search Base] using {U} or {T}, and then press the {OK} key.
Select a route folder to start the search. E-mail addresses registered in the se-
lected folder are search targets.
BEnter the Search Base, and then press the {OK} key.
For example, if the search target is the sales department of ABC company, en-
ter dc=sales department, o=ABC. (In this example, the description is for an
active directory. dc is for the organization unit, and o is for the...

System Settings
64
2
Starting SSL communication
ASelect [SSL] using {U} or {T}, and then press the {OK} key.
BSelect [On] using {U} or {T}, and then press the {OK} key.
Use SSL to communicate with the LDAP server.
To use SSL, the LDAP server must support SSL.
When SSL is set to [On], the port number automatically changes to 689.
SSL setting must be enabled on this machine. For details, consult your net-
work administrator.
Setting authentication
ASelect [Authentication] using {U} or {T}, and then press...

Administrator Tools
65
2
Entering the user name and password
AEnter the user name, and then press the {OK} key.
When [On] or [High Security] is selected for the authentication setting, use the
administrator account name and password. Do not enter the administrator
account name and password when using authentication for individual users
or each search.
Procedures for setting the user name differ depending on server environ-
ment. Check your server environment before making the setting.
Example: Domain...

System Settings
66
2
Testing the connection
APress [Con.Test].
Access the LDAP server to check the proper connection is established. Check
authentication works according to the authentication settings.
BPress [Exit].
Setting search conditions
ASelect [Search Conditions] using {U} or {T}, and then press the {OK} key.
If the connection test failed, check the settings, and try again.
This function does not check Search Conditions or Search Base.
BSelect necessary search items such as [Name], [E-mail...

Administrator Tools
67
2
CEnter attribute, and then press the {OK} key.
The attribute value may change depending on the server environment. Check
the attribute value complies with your server environment before setting it.
You can leave items blank, but you cannot leave attributes blank when
searching for e-mail addresses from the LDAP server Address Book.
Setting search options
ASelect [Search Options] using {U} or {T}, and then press the {OK} key.
BEnter attribute, and then press the {OK} key.
To...

System Settings
68
2
Downloaded From ManualsPrinter.com Manuals 

69
3. Copier Features
This chapter describes user tools in the Copier Features menu. For details on
how to access Copier Features, see Accessing User Tools.
Copier Features
This section describes the user tools in Copier Features.
Default settings are shown in bold type.
❖APS/ Auto R/E Priority
You can select [Auto Paper Select Priority] (APS Priority) or [Auto R/E Priority]
(Auto Reduce/Enlarge Priority). When you cancel this setting, select [Off].
The default setting is Auto Paper Select Priority....

Copier Features
70
3
❖Original Type Setting
You can adjust copy finish quality level according to original type. You can
choose these functions after selecting [Original Type 1 (Text)] or [Original Type 2
(Photo)].
Text Mode 1
normal text originals
Text Mode 2
newspapers, semi-transparent originals (reverse side print faintly visible)
 Photo Mode 1
text / photo images containing mostly photo areas
 Photo Mode 2
text / photo images containing mostly text areas
 Photo Mode 3
actual photographic paper...

Copier Features
71
3
❖Orientation
You can select the original orientation when using the Combine/Series, or
two-sided originals to 1-sided duplex function.
Type 1
You can select the original orientation when making Combine/Series cop-
ies.
Type 2
You can select the original orientation when using the Combine/Series, or
two-sided originals to 1-sided Duplex function.
The default setting is Do not Specify.
❖Max. Number of Sets
The maximum copy quantity can be set between 1 and 99 using number keys.
The...

Copier Features
72
3
❖Rotate Sort
Specify whether or not to select rotate sort when the {Sort} key is pressed.
The default setting is Off.
When you select [On], you can select [Rotate Sort].
When you select [Off], you cannot select [Rotate Sort]. If you press the {Sort}
key, only Sort is enabled.
When using Type 1 without the optional tray paper unit, you cannot use this
setting.
❖Rotate Sort:Auto Continue
If you select [Off] when the paper tray in use runs out of paper, the machine
stops, allowing you...