Ricoh Aficio MP2000LN User Manual

Parameter Setting
93
4 Parameter Setting
Parameter Setting allow you to customize various settings to suit your needs. To
change function settings, set the Parameter Switches.
❖Switches and Bits
Each parameter setting has a set of switches, and each of the switches consist
of eight bits, whose values are 0 or 1. The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between 0 and 1.
Switch 02:
❖Parameter Settings List...

Fax Features
94
4
05 2,1 Substitute the reception when the 
machine cannot print (because all 
paper trays have run out of paper, 
toner is empty, or all paper trays 
are out of order)00: Enabled un-
conditionally 
(Free)
01: Enabled 
when Own 
Name / Own 
Fax Number is 
received
11: Disabled 
(Reception off) 
05 5 Print sheet is limited to that which 
has highest priority.Off On
05 7 Empty tray alert (Paper Empty 
Warning) even when one paper 
tray is emptyOff On
07 2 Parallel Memory Transmission Off...

Parameter Setting
95
4
17 7 Receive messages by pressing the 
{Start} key when originals are not 
set.Off (The ma-
chine does not 
receive messag-
es by pressing 
the {Start} key.)On (The ma-
chine receives 
messages by 
pressing the 
{Start} key.)
18 0 Print date with Fax Header Off On
18 1 Print transmitter origin with Fax 
HeaderOff On
18 2 Print file number with Fax Header Off On
18 3 Print page number with Fax Head-
erOff On
19 1 Sort Journal by line type Off On
20 0 Reprint documents that could not...

Fax Features
96
4
Changing the User Parameters
This section describes how to set parameters.
Important
❒Access to some User Parameter Setting may require options, or other settings
may need to be made beforehand.
❒It is recommended that you print and store the Parameter Settings List
when you program or change parameter settings.
❒Do not change any bit switches other than those shown on the previous pages.
ASelect [Fax Features] using {U} or {T}, and then press the {OK} key.
BSelect [Administrator Tools]...

Parameter Setting
97
4
DSelect [Parameter Setting] using {U} or {T}, and then press the {OK} key.
ESelect the switch number you want to change using the scroll keys, and
then press the {OK} key.
FSelect the bit number you want to change.
When the bit number is pressed, the current value switches between 1 and 0.
Repeat step 
F to change another bit number for the same switch.
GPress the {OK} key.
HRepeat steps E and F to change the switch settings.
IAfter all the settings are finished, press the {User...

Fax Features
98
4
Printing the Parameter Settings List
Print this list to see the current Parameter Settings. However, only items of im-
portance or often-used items are included in the list.
ASelect [Fax Features] using {U} or {T}, and then press the {OK} key.
BSelect [Administrator Tools] using {U} or {T}, and then press the {OK} key.
CSelect [Parameter Setting] using {U} or {T}, and then press the {OK} key.
DSelect [Parameter Settings List] using {U} or {T}, and then press the {OK} key.
EPress the...

Home Position
99
4 Home Position
Specify the type of original immediately after the power is turned on and when
{Clear Modes} key is pressed.
❖Home Position
Image Density
Allows one of five image density steps to be set as the home position.
For details, see Image Density (Contrast), Facsimile Reference.
Resolution
Allows either Standard, Details, or Fine to be set as the home position.
For details, see Resolution, Facsimile Reference.
Original Type
Allows either Text or Photo to be set as the home...

Fax Features
100
4
❖Home Position Parameter List
For details about setting parameters, see Parameter Setting.
Do not change switches other than those listed.
Reference
p.93 “Parameter Setting”
Image Density (Contrast), Facsimile Reference
Resolution, Facsimile Reference
Original Type, Facsimile Reference
Stamp, Facsimile Reference
Transmission Modes, Facsimile Reference
Label Insertion, Facsimile Reference
Fax Header Print, Facsimile Reference
Switch Bit Item 0 1
00 3,2,1 Image density 000: Normal...

Home Position
101
4
Changing the Home Position
ASelect [Fax Features] using {U} or {T}, and then press the {OK} key.
BSelect [Administrator Tools] using {U} or {T}, and then press the {OK} key.
CSelect [Parameter Setting] using {U} or {T}, and then press the {OK} key.
DSelect [Home Position] using {U} or {T}, and then press the {OK} key.
ESelect the switch number you want to change using the scroll keys, and
then press the {OK} key.
FSelect the bit number you want to change.
Downloaded From...

Fax Features
102
4
GPress the {OK} key.
Downloaded From ManualsPrinter.com Manuals