Ricoh Aficio MP2000LN User Manual
Here you can view all the pages of manual Ricoh Aficio MP2000LN User Manual. The Ricoh manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 21
![Page 21
Connecting to the Interfaces
13
1
Note
❒Select [802.11 Ad hoc] mode when connecting Windows XP as a wireless LAN
client using Windows XP standard driver or utilities, or when not using the
infrastructure mode.
❒For details about how to specify wireless LAN settings from the control panel
on the machine, see IEEE 802.11b.
❒For details about how to specify wireless LAN settings from other than the
control panel on the machine, see Using Utilities to Make Network Settings.
❒For details about the setting...](http://img.usermanuals.tech/thumb/64/37673/w300_Ricoh_Aficio_MP2000LN-20.png "Page 21
Connecting to the Interfaces
13
1
Note
❒Select [802.11 Ad hoc] mode when connecting Windows XP as a wireless LAN
client using Windows XP standard driver or utilities, or when not using the
infrastructure mode.
❒For details about how to specify wireless LAN settings from the control panel
on the machine, see IEEE 802.11b.
❒For details about how to specify wireless LAN settings from other than the
control panel on the machine, see Using Utilities to Make Network Settings.
❒For details about the setting...")
Connecting to the Interfaces 13 1 Note ❒Select [802.11 Ad hoc] mode when connecting Windows XP as a wireless LAN client using Windows XP standard driver or utilities, or when not using the infrastructure mode. ❒For details about how to specify wireless LAN settings from the control panel on the machine, see IEEE 802.11b. ❒For details about how to specify wireless LAN settings from other than the control panel on the machine, see Using Utilities to Make Network Settings. ❒For details about the setting...
Page 22
Connecting the Machine 14 1 ❖When using in ad hoc mode / 802.11 ad hoc mode AIf the IEEE 802.11b interface unit is functioning, the LED lights up in orange. BIf it is connected properly to the network, the LED is green when in ad hoc mode or 802.11 ad hoc mode. If the LED is blinking, the machine is search- ing for devices. The LED will light after a few seconds. Print the configuration page to verify settings. Note ❒For details about printing a configuration page, see Print I/F Settings. Reference p.50...
Page 23
Network Settings 15 1 Network Settings This section describes the network settings you can change with User Tools (Sys- tem Settings). Make settings according to functions you want to use and the in- terface to be connected. Important ❒These settings should be made by the system administrator, or with the ad- vice the system administrator. Settings Required to Use the Printer/LAN-Fax This section lists the settings required for using the printer or LAN-Fax function. Ethernet This section lists the...
Page 24
![Page 24
Connecting the Machine
16
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN board is installed. If Ethernet
and IEEE 802.11b (wireless LAN) are both connected, the selected interface
has priority.
Reference
p.45 “Interface Settings”
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 802.11b...](http://img.usermanuals.tech/thumb/64/37673/w300_Ricoh_Aficio_MP2000LN-23.png "Page 24
Connecting the Machine
16
1
Note
❒IPv6 can be used only for the printer function.
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN board is installed. If Ethernet
and IEEE 802.11b (wireless LAN) are both connected, the selected interface
has priority.
Reference
p.45 “Interface Settings”
IEEE 802.11b (wireless LAN)
This section lists the settings required for using the printer or LAN-Fax function
with IEEE 802.11b...")
Connecting the Machine 16 1 Note ❒IPv6 can be used only for the printer function. ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN board is installed. If Ethernet and IEEE 802.11b (wireless LAN) are both connected, the selected interface has priority. Reference p.45 “Interface Settings” IEEE 802.11b (wireless LAN) This section lists the settings required for using the printer or LAN-Fax function with IEEE 802.11b...
Page 25
![Page 25
Network Settings
17
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
Reference
p.45 “Interface Settings”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the settings required for...](http://img.usermanuals.tech/thumb/64/37673/w300_Ricoh_Aficio_MP2000LN-24.png "Page 25
Network Settings
17
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
Reference
p.45 “Interface Settings”
Settings Required to Use Internet Fax
This section lists the settings required for using Internet Fax.
Ethernet
This section lists the settings required for...")
Network Settings 17 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. Reference p.45 “Interface Settings” Settings Required to Use Internet Fax This section lists the settings required for using Internet Fax. Ethernet This section lists the settings required for...
Page 26
![Page 26
Connecting the Machine
18
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When SMTP...](http://img.usermanuals.tech/thumb/64/37673/w300_Ricoh_Aficio_MP2000LN-25.png "Page 26
Connecting the Machine
18
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When SMTP...")
Connecting the Machine 18 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒SMTP Server and Fax E-mail Account must be specified in order to use the send function. ❒When POP before SMTP is set to [On], also make setting for Reception Proto- col and POP3/IMAP4 Settings. ❒When SMTP...
Page 27
Network Settings 19 1 IEEE 802.11b (wireless LAN) This section lists the settings required for using Internet FAX with IEEE 802.11b (wireless LAN). For details about how to specify the settings, see Interface Setting and File Transfer. Menu User Tool Setting Requirements Interface Settings/Network Machine IPv4 Address Necessary Interface Settings/Network IPv4 Gateway Address Necessary Interface Settings/Network DNS Configuration As required Interface Settings/Network DDNS Configuration As required...
Page 28
![Page 28
Connecting the Machine
20
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4...](http://img.usermanuals.tech/thumb/64/37673/w300_Ricoh_Aficio_MP2000LN-27.png "Page 28
Connecting the Machine
20
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface
board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con-
nected, the selected interface takes precedence.
❒SMTP Server and Fax E-mail Account must be specified in order to use the
send function.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4...")
Connecting the Machine 20 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[IEEE 802.11b] and [LAN Type] are displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are con- nected, the selected interface takes precedence. ❒SMTP Server and Fax E-mail Account must be specified in order to use the send function. ❒When POP before SMTP is set to [On], also make setting for Reception Proto- col and POP3/IMAP4...
Page 29
![Page 29
Network Settings
21
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.45...](http://img.usermanuals.tech/thumb/64/37673/w300_Ricoh_Aficio_MP2000LN-28.png "Page 29
Network Settings
21
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port.
Reference
p.45...")
Network Settings 21 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒When POP before SMTP is set to [On], also make setting for Reception Proto- col and POP3/IMAP4 Settings. ❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port. Reference p.45...
Page 30
![Page 30
Connecting the Machine
22
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port....](http://img.usermanuals.tech/thumb/64/37673/w300_Ricoh_Aficio_MP2000LN-29.png "Page 30
Connecting the Machine
22
1
Note
❒In [Effective Protocol], check that the protocol you want to use is set to [Active].
❒[LAN Type] is displayed when the wireless LAN interface board is installed. If
both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in-
terface takes precedence.
❒When POP before SMTP is set to [On], also make setting for Reception Proto-
col and POP3/IMAP4 Settings.
❒When setting POP before SMTP to [On], check POP3 port number in E-mail
Communication Port....")
Connecting the Machine 22 1 Note ❒In [Effective Protocol], check that the protocol you want to use is set to [Active]. ❒[LAN Type] is displayed when the wireless LAN interface board is installed. If both Ethernet and wireless LAN (IEEE 802.11b) are connected, the selected in- terface takes precedence. ❒When POP before SMTP is set to [On], also make setting for Reception Proto- col and POP3/IMAP4 Settings. ❒When setting POP before SMTP to [On], check POP3 port number in E-mail Communication Port....