Ricoh Aficio MP 9000 User Manual

Reproduction Ratio
123
4
❖R/E Ratio Priority
You can set the ratio with priority when [Reduce / Enlarge] is pressed.
Metric version
 400%
 200%
 141%
 122%
 115%
 93%
 82%
 75%
 71%
 65%
 50%
 25%
Inch version
 400%
 200%
 155%
 129%
 121%
 93%
 85%
 78%
 73%
 65%
 50%
 25%
❖Ratio for Create Margin
You can set a Reduce/Enlarge ratio when registering Create Margin in a
shortcut key.
Enter a ratio using number keys (in the range of 90 to 99%).
The ratio is set to 93% by default....

Copier/Document Server Features
124
4Edit
This section describes various items of [Edit] under [Copier/Document Server Fea-
tures].
Default settings are shown in bold type.
Enter the width of the binding margin with the number keys as follows:
 Metric version: 0–30 mm (in increments of 1 mm)
 Inch version: 0-1.2 (in increments of 0.1 inch)
Enter the width of the erased margin with the number keys as follows:
 Metric version: 2–99 mm (in increments of 1 mm)
  Inch version: 0.1-3.9 (in increments of...

Edit
125
4
❖Back Margin: Top / Bottom
You can specify top and bottom margins on the back side of copies in Margin
Adjustment mode.
Top
Bottom
Default:
Metric version: Top/Bottom 0 mm
 Inch version: Top/Bottom 0.0
❖1 Sided → 2 Sided Auto Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back
side.
The margin is set to the same value of “Back Margin: Left/Right.
Left
Right
Default:
Metric version: Right 5 mm
 Inch version: Right 0.2
❖1 Sided → 2 Sided Auto Margin:...

Copier/Document Server Features
126
4
❖Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1 boundary
margin around all four edges of each original.
On
Off
❖Erase Center Width
You can specify the width of the erased center margins with this function.
Default:
Metric version: 10 mm
 Inch version: 0.4
❖Front Cover Copy in Combine
You can make a combined copy on the front cover sheet when you select
Front Cover mode.
Combine
Do not Combine
❖Copy Order in...

Edit
127
4
❖Orientation: Booklet, Magazine
You can select the orientation of copies to open when using Booklet or Mag-
azine mode.
Open to Left
Open to Right
❖Copy on Designating Page in Combine
You can specify whether to make a combined copy on the inserted slip sheets
in Desig./Chapter mode.
Combine
Don not Combine
❖Image Repeat Separation Line
You can select a separation line from: None, Solid, Broken A, Broken B, or
Crop Marks.
None
 Solid
Broken A
Broken B
 Crop Marks
Downloaded From...

Copier/Document Server Features
128
4
❖Double Copies Separation Line
You can select a separation line using the Double Copies function from: None,
Solid, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Broken B
 Crop Marks
❖Separation Line in Combine
You can select a separation line using the Combine function from: None, Sol-
id, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Broken B
Downloaded From ManualsPrinter.com Manuals 

Edit
129
4
 Crop Marks
❖Copy Back Cover
When copying the back cover, you can specify whether to have the back cover
outside (outside page) or inside (inside page).
Outside
Inside
❖Double Copies Position
You can select the copy position of bottom or left page according to top or
right page as the original image position.
Same Position as Original Image Position
 Symmetrical to Original Image Position
Note
❒For the procedure of entering the [Copier/Document Server Features], see p.3
“Accessing User...

Copier/Document Server Features
130
4Stamp
This section describes various items of [Stamp] under [Copier/Document Server Fea-
tures].
Default settings are shown in bold type.
Background Numbering
This section describes various items of [Background Numbering] under [Stamp].
❖Size
You can set the size of the numbers.
Small
Normal
Large
❖Density
You can set the density of the numbers.
Light
Normal
Dark
Very Dark
Preset Stamp
This section describes various items of [Preset Stamp] under [Stamp].
❖Stamp...

Stamp
131
4
 Norwegian
Danish
 Russian
Japanese
 Simplified Chinese
Traditional Chinese
Hangul
❖Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
COPY
URGENT
PRIORITY
For Your Info.
 PRELIMINARY
For Internal Use Only
CONFIDENTIAL
DRAFT
❖Stamp Format
You can specify how each of stamp is printed.
Stamp Position
You can specify where to print the stamp.
Top Left
Top Center
Top Right
Center Left
Center
 Center Right
Bottom Left
Bottom Center
...

Copier/Document Server Features
132
4
Stamp Position
You can adjust the print position of the stamp within the available range
as shown below.
Metric version:
 Top Left…T/B: 4-144mm, L/R: 4-144mm
 Top Center…T/B: 4-144mm, L/R: 72-72mm
 Top Right…T/B: 4-144mm, L/R: 4-144mm
 Center Left…T/B: 72-72mm, L/R: 4-144mm
 Center…T/B: 72-72mm, L/R: 72-72mm
 Center Right…T/B: 72-72mm, L/R: 4-144mm
 Bottom Left…T/B: 4-144mm, L/R: 4-144mm
 Bottom Center…T/B: 4-144mm, L/R: 72-72mm
 Bottom Right…T/B: 4-144mm,...