Ricoh Aficio MP 6000SP User Manual

181
5. Printer Features
This chapter describes user tools in the Printer Features menu. For details on
how to access Printer Features, see “Accessing User Tools”.
List/Test Print
This section describes the user tools in the Test Print menu under Printer Fea-
tures.
Default settings are shown in bold type.
This is an item relating to the test print, such as for printing a system setup list,
etc. If you change settings related to printing or the machines operating environ-
ment, we recommend you print a...

Printer Features
182
5
❖PDF Configuration / Font Page
You can print the current configuration and installed PDF font list.
This menu can be selected only when the optional PostScript 3 unit is in-
stalled.
❖Hex Dump
You can print in the Hex Dump mode.
Reference
p.3 “Accessing User Tools”
Printing the configuration page
This section describes how to print the Configuration Page.
APress [Printer Features].
BPress [Configuration Page] on the [List / Test Print].
The configuration page is printed.
However,...

List/Test Print
183
5
Interpreting the configuration page
This section describes the Configuration Page.
❖System Reference
Unit Number
Displays the serial number assigned to the board by its manufacturer.
Total Memory
Displays the total amount of memory (SDRAM) installed on the printer.
 Firmware Version
Printer
Displays the version number of the printer firmware.
System
Displays the version number of the system firmware.
Engine
Displays the version number of the printer engine.
LCDC
Displays the...

Printer Features
184
5
❖Host Interface
Displays settings made under the Host Interface menu.
When DHCP is active on the network, the actual IP address, subnet mask and
gateway address appear in parentheses on the configuration page.
❖Interface Information
Displays the interface information.
Downloaded From ManualsPrinter.com Manuals 

Maintenance
185
5 Maintenance
This section describes the user tools in the Maintenance menu under Printer Fea-
tures.
Default settings are shown in bold type.
❖List / Test Print Lock
You can lock the [List / Test Print] menu.
The default setting is Off.
❖Delete All Temporary Print Jobs
You can delete all print jobs temporarily stored in the machine.
❖Delete All Stored Print Jobs
You can delete all print jobs stored in the machine.
Reference
p.3 “Accessing User Tools”
Downloaded From ManualsPrinter.com...

Printer Features
186
5System
This section describes the user tools in the System menu under Printer Features.
Default settings are shown in bold type.
❖Print Error Report
Select this to have an error report printed when a printer or memory error oc-
curs.
The default setting is Off.
❖Auto Continue
You can select this to enable Auto Continue. When it is On, printing continues
after a system error occurs.
The default setting is Off.
❖Memory Overflow
Select this to have a memory overflow error report...

System
187
5
❖Memory Usage
 Y o u  c a n  s e l e c t  t h e  a m o u n t  o f  m e m o r y  u s e d  i n  F o n t  P r i o r i t y  o r  F r a m e  P r i o r i t y ,
according to paper size or resolution.
The default setting is Frame Priority.
 Font Priority
This setting uses memory for registering fonts.
Frame Priority
This setting uses frame memory for high speed printing.
❖Duplex
Set two-sided printing.
The default setting is Off.
❖Copies
Set the number of copies from 1 to 999 in units of one copy....

Printer Features
188
5
❖Sub Paper Size
You can enable the Auto Substitute Paper Size (A4.LT) feature.
The default setting is Off.
❖Page Size
You can select the default paper size.
The paper size you can select is as follows:
11×17
8
1/2×14
8
1/2×11
5
1/2×81/2
71/4×101/2
8×13
8
1/2×13
8
1/4×13
A3
B4 JIS
A4
B5 JIS
A5
B6 JIS
A6
 Custom Size
The default setting is A4 (Metric version) / 8
1/2×11 (Inch version).
The paper size currently set for the bypass tray is applied. 
❖Letterhead Setting...

System
189
5
❖Bypass Tray Setting Priority
You can specify which of the two options, (Printer) Driver / Command or
Machine Settings, has priority for determining the paper size for the bypass
tray.
The default setting is Driver / Command.
❖Edge to Edge Print
You can select whether or not to print on the entire sheet.
The default setting is Off.
The 5 mm margin along the edges may not be printed properly.
❖Default Printer Language
You can set the default printer language if the machine cannot find the...

Printer Features
190
5Host Interface
This section describes the user tools in the Host Interface menu under Printer
Features.
Default settings are shown in bold type.
❖I/O Buffer
You can set the size of the I/O Buffer. Normally it is not necessary to change
this setting.
The default setting is 128 KB.
❖I/O Timeout
You can set how many seconds the machine should wait before ending a print
job. If data from another port usually arrives in the middle of a print job, you
should increase this timeout period....