Ricoh Aficio MP 6000SP User Manual

Registering Fax Information
141
4
Registering Fax Information
APress [Facsimile Features].
BPress [Initial Settings].
CPress [Program Fax Information].
DSelect the Fax Information you want to register.
ERegister the name and facsimile number.
FPress [Exit].
GPress the {User tools/Counter} key.
Registering a Fax Header
ACheck that [Fax Header] is selected.
BPress [First Name] or [Second Name].
CEnter a fax header including your Own Name and Fax Number, and then
press [OK].
Downloaded From...

Facsimile Features
142
4
Registering an Own Name
APress [Own Name].
BPress [Own Name].
CEnter your own name, and then press [OK].
Registering an Own Fax Number
APress [Own Fax Number].
BSelect line type to program.
The display differs depending on the optional units installed on the machine.
CEnter your own facsimiles number using the number keys, and then press
[OK].
To enter a + sign or a space, press [+] or [Space].
Downloaded From ManualsPrinter.com Manuals 

Registering Fax Information
143
4
Changing Fax Information
APress [Facsimile Features].
BPress [Initial Settings].
CPress [Program Fax Information].
DSelect the Fax Information you want to change.
To change a Fax Header, see “Registering a Fax Header”.
To change Own Name, see “Registering an Own Name”.
To change Own Fax Number, see “Registering an Own Fax Number”.
EPress [Exit].
FPress the {User tools/Counter} key.
Reference
p.141 “Registering a Fax Header”
p.142 “Registering an Own Name”
p.142...

Facsimile Features
144
4Forwarding
Print documents received and forward to a specified End Receiver. This is useful
if, for example, you are visiting another of f i c e  a n d  w o u l d  l i k e  a  c o p y  o f  y o u r  d o c -
uments to be sent to that office.
You can also specify a “folder” as the forwarding destination.
Important
❒To use this function, set Forwarding under Reception Settings to On (enable).
❒You can select end receivers only from among destinations programmed in
the Address Book....

Forwarding
145
4
Programming an End Receiver
Important
❒One end receiver can be registered for each special sender. To register two or
more end receivers, use group destination. However, a maximum of 500 des-
tinations can be specified in a group.
APress [Facsimile Features].
BPress [Reception Settings].
CPress [Forwarding].
DPress [On].
If there is an End Receiver already programmed, a receiver name is shown. If
you want to change the receiver, press [Receiver] and proceed to step 
E.
To cancel...

Facsimile Features
146
4
ESpecify an End Receiver using the destination list, and then press [OK].
The receiver name is shown to the right of [Receiver].
Press the key on the left of the display to switch the destination between fax
number, e-mail address, IP-Fax destination, and folder.
Set a folder destination in Address Book Management under Administrator
Tools in the System Settings menu. See “Registering Folders”.
If you have specified a folder for forwarding, you can specify the file format
used...

Forwarding
147
4
Quitting the forwarding function
APress [Facsimile Features].
BPress [Reception Settings].
CPress [Forwarding].
DPress [Off], and then press [OK].
EPress the {User Tools/Counter} key.
Forwarding Mark
You can print a Forwarding Mark on receivers documents that have been for-
warded.
The receiver can distinguish between forwarded and normally received docu-
ments.
This function is not available when memory forwarding is performed to a folder
destination.
Reference
p.148 “Parameter...

Facsimile Features
148
4Parameter Settings
User Parameters allow you to customize various settings to suit your needs. To
change function settings, set the User Parameter Switches.
❖Switches and Bits
Each User Parameter has a set of switches, and each of the switches consist of
eight bits, whose values are “0” or “1”. The right most bit is bit 0 and the left
most is bit 7. You can adjust the settings to match your needs by switching the
value of bits between “0” and “1”.
Switch 02
❖User Parameter List...

Parameter Settings
149
4
05 2,1 Substitute the reception when the machine 
cannot print (because paper is jammed, all 
paper trays have run out of paper, toner is 
empty, or all paper trays are out of order)00: Enabled 
uncondition-
ally (Free)
01: Enabled 
when Own 
Name/Own 
Fax Number 
is received
10: Enabled 
for Closed 
Network 
Code match
11: Disabled 
(Reception 
off)
-
05 5 Print sheet is limited to that which has high-
est priority.Off On
05 7 Empty tray alert (Paper Empty Warning) 
even when...

Facsimile Features
150
4
15 0, 1, 2 Selecting the available paper feed tray. 001: Tray 1
010: Tray 2
011: Tray 3
100: Tray 4
101: Large 
Capacity 
Tray (LCT)-
15 5 Whether or not to select the available paper 
feed tray.Off On
17 2 Whether you need to press [Add] after speci-
fying a destination with the Destination key 
when broadcastingNot neces-
saryNecessary
17 3 Whether or not to reset the settings when 
original is scanned.On Off
17 7 Receive documents by pressing the {Start} 
key when originals...