Proxima Pro Av 9350 Projector User Manual

11
TERMINALS OF THE PROJECTOR
This projector applies various input/output terminals and 4 terminal slots for expansion to tune to diversity of signals from
computers and video equipment. 4-built-in Terminal Slots enable you to arrange desired combinations of input sources just
by changing Terminal Boards.  For Terminal Boards, contact the sales dealer where you purchased the projector.
CONNECTING THE PROJECTOR
Pull out the terminal by holding the handle.
Remove 2 Screws on the terminal.1
2
REPLACEMENT OF...

12
analog RGB
R/Pr
G/Y B/PbH/HV V
PC controlDVI
INPUT-1
R/C jack
USB
reset
(mono)
(mono) (mono) (mono) (mono)
PC control audio
PC control
S-video
video/YC
INPUT-2 INPUT-3
INPUT-4
audio
audioaudio
serial port IN
serial port OUT
RLaudio OUT
R
L
R
R
RL
L
L
When controlling the computer
with the Remote Control of
this projector, connect the
mouse port of your personal
computer to these connectors.
(Refer to P14.)
Connect the S-VIDEO
output from the video
equipment to this jack.
(Refer to P15.)  
Connect the...

13
CONNECTING THE PROJECTOR
Connect an external audio
amplifier to these jacks.  
(Refer to P14, 15.)
AUDIO OUTPUT JACKS
This projector uses a micro processor to control the
unit.  Occasionally, the micro processor may
malfunction and need to be reset.  This can be done
by pressing the RESET button with a pen, which will
shut down and restart the unit.  Do not use the
RESET function excessively.
RESET BUTTON
When using the Wired / Wireless
Remote Control Unit as the Wired
Remote Control, Connect the...

14
analog RGB
R/Pr
G/Y B/Pb H/HVV
PC controlDV I
INPUT-1
R/C jackUSB
reset
(mono)
(mono) (mono) (mono)(mono)
PC control audio
PC control
S-video
video/YC
INPUT-2 INPUT-3 INPUT-4
audio
audioaudio
serial port IN
serial port OUT
audio OUT
RL
RL RL R
L RL
CONNECTING TO THE COMPUTER
IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA / SXGA)
VGA Cable 
Monitor Output 
Desktop type Laptop type
Control Cable
for Serial Port
Audio Cable
(stereo) 
✽
Serial portPS/2 port Audio Output
Audio InputAUDIO...

15
CONNECTING TO THE VIDEO EQUIPMENT
analog RGB
R/Pr G/Y B/Pb H/HV V
PC controlDV I
INPUT-1
R/C jackUSB
reset
(mono)
(mono)(mono) (mono) (mono)
PC control audio
PC control
S-video
video/YC
INPUT-2 INPUT-3 INPUT-4
audio
audioaudio
serial port IN
serial port OUT
audio OUT
RL
R RL
L R
L R
L
Video Source (example)
Video Cassette Recorder
Video Disc Player
Video
Cable ✽
S-VIDEO 
Cable ✽
Audio Amplifier
Audio Speaker (stereo)
Audio Cable 
(Stereo) ✽
S-VIDEO Output
Audio Input
Cables used for connection
• Video...

menu
auto image
normal selectvolume
zoomfocus
lens shiftpowerinput 1/2
input 3/4
16
SIDE CONTROLS AND INDICATORS
Used to adjust zoom.
(P24)
INPUT 3/4 BUTTON
POWER ON–OFF BUTTONFOCUS BUTTONSVOLUME BUTTONS
Used to select input source
either INPUT 3 or INPUT 4.
(P26)Used to operate AUTO
IMAGE function.  (P33)
Used to adjust focus.  (P24)Used to adjust volume.
(P26)
Used to reset to normal
picture adjustment preset
by factory.  (P33, 38)Used to select an item or
adjust the value in the
MENU.  It is also used...

readylamp
status
lamp
replacewarning
temp.
17
READY INDICATORLAMP INDICATORLAMP REPLACE INDICATOR
This indicator lights green
when the projector is ready
to be turned on.  And it
flashes green in Power
Management mode.  (P39)This indicator is dim when
the projector is turned on.
And bright when the
projector is in stand-by
mode.
INDICATORS BEFORE OPERATION
WARNING TEMP. INDICATOR
This indicator flashes red
when internal projector
temperature is too high.
(P43)
warning
temp.ready
lamp
replacelamp
status...

18
volume
power
focus
zoom
input 3/4
input 1/2d.zoom
menumute
laser
keystoneblankfreeze
auto imagenormal
lens shift
p-timer
lock
OPERATION OF THE REMOTE CONTROL
on
all off
ALL-OFF SWITCH
LEFT SIDE
When using the Remote Control
Unit, turn this switch to “ON.”  And
turn it to “ALL OFF” when it is not
used.
This remote control emits a laser beam as the Laser Pointer from the Laser Light Window.  When the LASER button is
pressed, the laser light goes on.  And when the button is pressed more than 1 minute or...

19
Used to adjust zoom.
(P24)
volume
power
focus
zoom
input 3/4
input 1/2d.zoom
menumute
laser
keystoneblankfreeze
auto imagenormal
lens shift
p-timer
lock
To insure safe operation, please observe the following precautions :
Use (2) AA, UM3 or R06 type alkaline batteries.
Replace two batteries at the same time.
Do not use a new battery with a used battery.
Avoid contact with water or liquid.
Do not expose the Remote Control Unit to moisture, or heat.
Do not drop the remote control unit.
If...

20
HOW TO OPERATE THE ON-SCREEN MENU
FLOW OF ON-SCREEN MENU
Display ON-SCREEN MENU
Press MENU button to display the ON-SCREEN MENU
(MENU BAR).  The red frame is the POINTER.
Select the ITEM by pressing SELECT button.  The
dialog box of the ITEM appears.
Move the POINTER (red frame) to the ITEM ICON that
you want to select by pressing POINT RIGHT / LEFT
buttons.
Move the POINTER to the ITEM that you want to adjust
and adjust the ITEM by pressing SELECT button.
Refer to the following pages for details of...