Proxima Pro Av 9350 Projector User Manual

21
MENU BAR
SYSTEM MENU
Used to select a
computer system.
(Refer to P28)
IMAGE MENU
Used to adjust the
computer image. 
[Fine sync / Total dots /
White Balance / Contrast /
Brightness / Sharpness/
Gamma/Progressive]
(Refer to P32)
PC ADJUST MENU
Used to adjust the
parameters to
match with the input
signal format.
(Refer to P30, 31)
SETTING MENU
SCREEN MENU
Used to adjust the
size of the image or
to correct the
Keystone distortion.
(Refer to P34)
LANGUAGE MENU
Used to select
the language
used in the
Menu....

22
SYSTEM MENU
Used to select a
color system of the
selected video
source.
(Refer to P36)
IMAGE MENU
Used to adjust the picture image.  
[Color / Tint / White Balance / Contrast
/ Brightness/ Sharpness/Gamma /
Noise  Reduction / Progressive]
(Refer to P37)
BEFORE OPERATION
MENU BAR IN VIDEO MODE 
WHEN SELECT THE AV TERMINAL
INPUT SOURCE MENU
Used to select a video
source among [Video,
Y/C and S-Video
.  
(Refer to P35)
SYSTEM MENU
Used to select a
component video
signal format.
(Refer to P36)
WHEN SELECT...

23
TURNING ON THE PROJECTOR
Connect the projectors AC Power Cord into a wall outlet and
turn the MAIN ON / OFF SWITCH to ON.  The LAMP indicator
lights RED, and the READY indicator lights GREEN.
Press the POWER ON-OFF button on the Remote Control Unit
or on  the Side Control to ON.  The LAMP indicator dims, and
the Cooling Fans start to operate.  The Preparation Display
appears on the screen and the count-down starts.  The signal
from the source appears after 30 seconds.
Lamp status is also displayed on...

24
ADJUSTING THE IMAGE
The message disappears after 4 seconds.
The message disappears after 4 seconds.
Zoom
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1Press the ZOOM /button(s) on the Side Control or on the
Remote Control Unit.  The message “Zoom” is displayed.
2Press the ZOOM button to make the image larger, and press
the ZOOM button to make the image smaller.
1Press the FOCUS /button(s) on the Side Control or on the
Remote Control Unit.  The message “Focus” is displayed.
2Adjust the focus of the image by...

25
Press the FREEZE button on the Remote Control Unit to freeze the picture on-screen.  This function is
cancelled when the FREEZE button is pressed again or any other function button is pressed.
Press the BLANK button on the Remote Control Unit to black
out the image.  This function is cancelled when the BLANK
button is pressed again or any other function button is pressed.
BLANK FUNCTION
PICTURE FREEZE FUNCTION
The message disappears after 4 seconds.
Blank
Press the P-TIMER button on the Remote Control...

26
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to select
SOUND and press the SELECT button.  Another dialog box
SOUND ADJUST Menu will appear. 
Move the arrow to or of Volume by pressing the POINT UP/
DOWN buttons.  To increase the volume, point the arrow to and
then press the SELECT button.  To decrease the volume point the
arrow to and then press the SELECT button. 
To cut off the audio sound, point the arrow to Mute and then press
the SELECT...

27
Press the MENU button and the ON-SCREEN MENU will
appear.  Press the POINT LEFT/RIGHT buttons to select INPUT
SOURCE and press the SELECT button.  
Another dialog box
INPUT SOURCE Menu will appear.
Press the POINT DOWN button and a red-arrow icon will
appear.  Move the arrow to RGB, and then press the SELECT
button.  
1
2
RGB
When connect the computer output [5 BNC Type (Red, Green,
Blue, Horiz. Sync and Vert. Sync.)] from the computer to the
R/Pr, G/Y, B/Pb, H/HV and V jacks.
When connecting to those...

28
AUTOMATIC MULTI-SCAN SYSTEM
This projector automatically tunes to most different types of
computers based on VGA, SVGA, XGA or SXGA (refer to
“COMPATIBLE COMPUTER SPECIFICATION” on page 29).
When selecting Computer, this projector automatically tunes to
the incoming signal and projects the proper image without any
special settings.  (Setting of the Computer System may be
required when connecting some computers.)
Note : The projector may display one of the following messages.
The projector cannot...

29
COMPATIBLE COMPUTER SPECIFICATIONS
Basically this projector can accept the signal from all computers with the V, H-Frequency mentioned below and
less than 202 MHz of Dot Clock.
NOTE :Specifications are subject to change without notice.
ON-SCREEN
DISPLAYRESOLUTIONH-Freq.
(kHz)V-Freq.
(Hz)
VGA 1640 x 48031.4759.88
VGA 2720 x 40031.4770.09
VGA 3640 x 40031.4770.09
VGA 4640 x 48037.8674.38
VGA 5640 x 48037.8672.81
VGA 6640 x 48037.5075.00
MAC LC13640 x 48034.9766.60
MAC 13640 x 48035.0066.67
MAC 16832 x...

30
COMPUTER MODE
PC ADJUSTMENT
This Projector can automatically tune to the display signals from most personal computers currently distributed.
However, some computers employ special signal formats which are different from the standard ones and may
not be tuned by the Multi-Scan system of this projector.  If this happens, the projector cannot reproduce a proper
image and the image may be recognized as a flickering picture, a non-synchronized picture, a non-centered
picture or a skewed picture.
This...