Projector Christie Vivid Red User Manual

1. Infrared Transmitter
2. Laser Pointer
3. Power Button
4. Laser Button
5. Menu Button
6. Video Button
7. Data Button
8. Keystone Button9. Zoom Button
10. Auto Button
11. Freeze Button
2. Mouse Pointer Button
13. Left Mouse (LM) Button
14. Right Mouse (RM) Button
15. Left Button
6. Right Button
17. Up/Down Button
18. Volume up/Volume down (Vol+/Vol-)
Button
Direct the remote control to the remote sensor
on the projector.
Beams a laser light when Laser button is
pressed.
While the power is applied, main...

MANUPOWER
LASER
DATAKEYSTONEZOOM
AUTO
VIDEOFREEZELM
RM
DOWN UP
MANUPOWER
LASER
D ATAKEYSTONEZOOM
AUTO
VIDEOFREEZELM
RM
DOWN UP
15
15
Within 10 m (11 yards) Within 10 m (11 yards)
Range of Use of the Wireless Remote Control
1. Press button.
The menu screen is displayed.
: When RGB is selected for the input source.
2. Select the menu item you wish to adjust with buttons on the
remote control or on the control keypad
3. Press the button to go into the sub-menu
4. Use button to adjust the sub-menu scale.
5....

Brightness
Contrast
H position
V position
Phase (RGB only)
Frequency (RGB only)
Color (Video only)
Tint (Video only)
Detail (Video only) Adjust the brightness of the picture. Press Left button to make it darker,
Right button to make it brighter.
Adjust the image contrast by pressing Left button to make it weaker,
Right button to make the contrast stronger.
Adjust the picture horizontal position by pressing Left and Right buttons.
Adjust the picture vertical position by pressing Left and...

Sharpness
User Red
User Green
User Blue
Scaling (RGB only)
Scaling (Video only) Adjust the sharpness level by pressing Left/ Right buttons to choose.
Adjust the strength of the red color. Press Left button to make it weaker,
Right button to make it stronger.
Adjust the strength of the green color. Press Left button to make it
weaker, Right button to make it stronger.
Adjust the strength of the blue color. Press Left button to make it
weaker, Right button to make it stronger.
Fill Fill the...

OSD
Language
BNC
Image Orientation
Rear Projection Choose the OSD position to be in the left/middle/right corner of
upper/middle/lower part of the screen.
Select the languages of menu display: English, German, French,
Spanish, and Chinese.
Select Inverted to turn the image upside down when you put the
projector on the ceiling.
Select On to reverse the image when you put the projector behind
the translucent screen. Select the source type when connecting the BNC terminal. When the
input source is...

OSD Timeout
OSD Background
Freeze Frame
Keystone
Zoom
Lamp Life Select how long you wish your OSD will be displaying on the screen.
Select the OSD background to be opaque or translucent.
Freeze the picture by selecting On, cancel it by selecting Off.
Correct the keystone distortion. Press Left/ Right buttons to correct the
keystone distortion, and make the image square.
The maximum keystone correction is 15 degrees upward and
downward with the projector placed horizontally on the ground...

Mute
Source
Volume
Bass
Treble
Balance Mute the sound by selecting On, back to normal by selecting Off.
Select the audio source from video input or RGB input.
Set the audio to be mono or stereo.
Adjust the volume by pressing Left button to decrease the volume,
Right button to increase the volume.
Adjust the power of bass sound. Press Left button to decrease the
strength, Right button to increase the strength.
Adjust the treble level. Press Left button to decrease the level, Right
button to...

Never look directly into the projector lens. The extremely high
brightness of the projector can cause permanent eye damage.
Observe and follow all warnings and instructions marked on the projector.
Operate the projector in an environment which meets the operating range
specification in Section 6, Specifications. Do not operate the projector
close to water, such as near a swimming pool.
Do not place the projector on an unstable cart, stand or table. If the
projector is to be ceiling mounted, only use the...











Only use attachments or accessories recommended by Christie, such as
the specific power cord supplied. Use of other attachments or
accessories with this projector may result in the risk of fire, shock or
personal injury.
Do not allow anything to rest on the power cord. Locate the projector
where the cord can not be abused by persons walking on it or objects
rolling on it.
Operate the projector at the specified voltage only. Do not overload power
outlets and extension cords as it can...

If any of the following conditions exist, immediately unplug the projector
from the power outlet and refer service to qualified service personnel.
- The power cord has been damaged.
- The internal cooling fans do not come on when the projector is first
turned on.
- Liquid has been spilled in the projector
- The projector has been exposed to excessive moisture.
- The projector does not operate normally.
- The projector has been dropped or the case has been damaged .
- Projector performance has...