Home > Christie > Projector > Projector Christie Roadster S+20k User Manual

Projector Christie Roadster S+20k User Manual

Here you can view all the pages of manual Projector Christie Roadster S+20k User Manual. The Christie manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 161

Appendix F 
Optional Input Modules 
 
 Roadster/Mirage S+ User’s Manual F-1 
The following optional input modules can be installed in either option slot in the projector (INPUT 5 or INPUT 6). 
Contact your dealer for a complete an up-to-date listing. 
NOTES:1) Optional interface modules can be hot-swapped into a running projector. 
2) Any audio connectors shown are non-functional in this projector. 
NOTE: Standard with Roadster models. See Section 2. 
The Dual SD/HD-SDI Module enables incoming SD or HD...

Page 162

OPTIONAL INPUT MODULES 
F-2 
Roadster/Mirage S+ User’s Manual 
RGB500 Features 
◊ Accepts 3, 4, or 5 wire RGB video (sync-on-green, composite sync, or 
separate horizontal and vertical sync), up to 500 MHz bandwidth 
◊ Accepts YPbPr, composite (on green) and Y/C (on red/blue) 
◊ BNC connectors for RGB signal inputs 
 
Connect three-, four-, or five-wire RGB video signals of up to 400 MHz bandwidth—
these are signals typically produced by high-resolution computer or workstations. The 
buffering capability...

Page 163

OPTIONAL INPUT MODULES 
 
Roadster/Mirage S+ User’s Manual F-3 
 
The Composite Video Input Module receives either composite video input signals 
from tape or disk players. Video inputs are 75
Σ terminated. Video outputs are 
provided for buffered loop-through to another display device. 
 
NOTES: 1) The S-video portion of this module is non-functional with this projector. 
Connect composite video signals only. 2) This module is not a decoder. 
Composite Video Features 
◊ BNC connectors for composite RGB...

Page 164

OPTIONAL INPUT MODULES 
F-4 
Roadster/Mirage S+ User’s Manual 
Features 
◊ Supports Digital Visual Interface (DVI) single-channel 
◊ Supports VESA Extended Display Identification Data (EDID) 
◊ Provides an active-loop-through using a DVI connector (conforming to the 
DVI Specification) 
The Serial Digital Input Module (SDI) accepts a serial digital 4:2:2 component video 
signal (YCbCr) via a single 
SERIAL IN BNC connector. The signal can loop through 
the 
SERIAL OUT BNC out to another device (such as...

Page 165

 
Index 
 
 Roadster/Mirage S+ User’s Manual I-1 
3 
 
3D Stereo Sync Delay, 3-36 
3D Stereo Sync Locking, 3-35 
3D Stereo Sync Select, 3-36 
A 
AC Line Cord, 3-3 
AC Power 
Requirements, 2-1, 2-27, 6-5 
Active Input Window, 3-25 
Adjusting Input Levels, 3-32 
Advanced Image Settings Submenu, 3-33 
Advanced Size and Position submenu, 3-25 
Alignment Procedure, 2-10 
Anamorphic, 3-24 
Arrow Keys, 3-11 
Aspect Ratio, 2-14.  
Auto Color Enable, 3-31 
Auto Input Level, 3-31 
Auto Key, 3-7 
Auto Setup, 2-2,...

Page 166

INDEX 
I-2 
Roadster/Mirage S+ User’s Manual 
Submenu, 3-39 
Component Video, 2-19 
Components, 1-2 
Location and Use, 3-1 
Composite Video, 2-20 
Configuration Menu, 3-37 
Contrast, 3-26 
Contrast Key, 3-9 
Cross Talk, 3-35 
Custom Sizing, 3-22 
D 
Dark Interval, 3-35 
Date and Time 
Setting, 3-38 
Decoder AGC 
Enabling, 3-28 
Decoder Luma Delay, 3-30 
Define Custom Color Gamuts, 3-45 
Detail 
Image Sharpness, 3-28 
Detail Threshold, 3-37 
Diagnostics and Calibration, Submenu, 3-48 
Display 
Channel...

Page 167

INDEX 
 
Roadster/Mirage S+ User’s Manual I-3 
Ambient Lighting, 2-14 
Ceiling Mounting, 2-17 
Front Screen, 2-13 
Horizontal Position, 2-16 
Other Considerations, 2-14 
Rear Screen, 2-13 
Screen Size, 2-13 
ScreenAspect Ratio, 2-14 
Type, 2-12 
Vertical Position, 2-15 
Intensity Setting for Lamp, 3-56 
Invalid Channel, 3-71 
Invalid User Entry. See Error Messages 
IP Address, 3-41 
Setting, 2-25 
IR Sensors, 3-43 
K 
Keypad 
Accessing Menus, 3-12 
Built-in, 2-29, 3-4 
Conversion, 2-30 
Enabling Wire...

Page 168

INDEX 
I-4 
Roadster/Mirage S+ User’s Manual 
OSD Key, 3-9 
P 
Panel 
Input, 3-3 
Peak Detector, 3-32, 3-49 
PIP, 3-51 
Aspect Ratio Presets, 3-53 
Blanking, 3-25 
Border Color, 3-53 
Border Width, 3-53 
Compatible Signals, 3-51 
Enable, 3-52 
Image Settings. See Image Settings Menu 
Position Presets, 3-53 
Primary Image, 3-51 
Secondary Image, 3-51 
Size and Position Submenu, 3-53 
Swap Main and PIP Image, 3-52 
PIP Key, 3-10 
Pixel Phase, 3-24 
Pixel Tracking, 3-24 
Plug & Display (EDID), 3-26 
Port...

Page 169

INDEX 
 
Roadster/Mirage S+ User’s Manual I-5 
T 
Test Key, 3-7 
Test Pattern, 3-44 
Test Pattern Grey Level, 3-48 
Text Editing, 3-15 
Characters, 3-15 
Navigation, 3-15 
Numerical Values, 3-16 
Throw Distance, 2-1, 2-15 
Definition, 2-15 
Time-outs, 3-13 
Troubleshooting 
Ethernet, 5-4 
Lamp, 5-3 
Power, 5-1 
V 
Ventilation, Importance of, 4-3 
Vertical Offset 
Adjusting, 3-2 Vertical Position, 2-15, 3-25 
Vertical Stretch, 3-24 
Video, 3-3 
Video Options, 3-28 
Video Standards, 3-29 
Voltmeter, 3-3 
W...
Start reading Projector Christie Roadster S+20k User Manual

Related Manuals for Projector Christie Roadster S+20k User Manual

All Christie manuals