Projector Christie Roadster Hd14k M User Manual
Have a look at the manual Projector Christie Roadster Hd14k M User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 476 Christie manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Section 7: Specifications M Series User Manual7-7020-100009-07 Rev. 1 (07-2012) 7.2.12Status LED 7.2.13Electronics/SW STATUS LED’S LED STATES Lamp 1, Lamp 2 Off – Lamps are off Yellow – Lamp time has expired and lamp should be replaced Green – Lamp is on and operating correctly Flashing red – Lamp has malfunctioned Power Off – AC power is off Yellow – AC is present but projector is in standby Green – Projector is powered up and operating normally Flashing Green/Yellow – Projector communication in progress Flashing Red – Error has occurred. Details are displayed on the status display Shutter Green – shutter is open Yellow – shutter is closed FEATURECOMMENTS Video Format Re-Sizing All video formats can be resized to fill screen either horizontally or vertically while maintaining aspect ratio Picture in Picture Seamless Switching Built-in 2D keystone and geometry correction Auto-scaling Auto-de interlacing Edge blending Black level edge blending not available on WX models Warping Tiling (support for up to 3x3 arrays) Blanking and Image positioning Brightness, contrast, color, and uniformity user configurable control Image orientation Can display image front/rear, normal/inverted (ceiling) Electronics HW access All accessible electronics are mounted from the back of the projector Number of option cards 6 user inter-changeable – hot swappable Number of processor cards 2 user inter-changeable Number of option slots 4, located at back of projector for option cards; 1, located at back of projector for processor card Native format adjustment Optional global aspect ratio setting can be set for projector allowing for automatic scaling of all input images to required output format Arbitrary Gamma User definable gamma curves
7-8M Series User Manual020-100009-07 Rev. 1 (07-2012) Section 7: Specifications 7.3 Image Processor Performance 7.4 Input (Source Signal) Compatibility 7.4.1 Analog (Only) Input 7.4.2 Twin HDMI Input Min input pixel rate 13 Megapixels/s Max input pixel rate 330 Megapixels/s Max input resolution 2048x1536 (QXGA) Min input resolution 640x400 Max input frame rate 95Hz at 2048x1536 (QXGA) * * With sources that can output minimum blanking, otherwise lower vertical rates Processing 10 bit throughout * * Except Dual-DVI input in dual-link mode (dual 8 bit input paths into 10 bit processing) Maximum Throughput 1920x1200 (WUXGA) In and OutStandard Image Processor Card 60 Hz In 60 Hz Out Dual Image Processor Card 120 Hz In 120 Hz Out Connectors 5 female BNC, 75 Ohm R/Pr G/Y B/Pb H/C V Color spaces/signal types RGB YPbPr A/D conversion 10 bits Connectors 2 independent HDMI inputs type A 2 loop-out connectors type A Color spaces/signal types RGB YCbCr (4:2:2) YCbCr (4:4:4) HDCP support HDMI 1.3 supported (not including audio) except: 12-bit color dithered to 10 bits; 16 bit color not supported
Section 7: Specifications M Series User Manual7-9020-100009-07 Rev. 1 (07-2012) 7.4.3 Dual Link DVI Input 7.4.4 Video Decoder Input 7.4.5 Dual 3G/HD/SD-SDI 7.5 Control Signal Compatibility 7.5.1 Projector Control Connectors 1 dual link DVI-I 1 analog 15-pin VGA Color spaces/signal types HDCP support A/D conversion 10 bits for single link DVI input 8 bits for dual link DVI inputs Frequency 165 Megapixels/s analog Connectors 2 S-Video 4-pin miniature DIN 4 BNC, 75 Ohm 2 independent decoder channels for PIP Color space/Signal types Composite video Component video (SD and ED only) S-video Video Standards NTSC, NTSC 4.43, PAL, PAL M, PAL N, PAL 60, SECAM A/D conversion 10 bits Connectors BNC, 75 Ohm Color spaces/signal types Dual HD input SDI, HD-SDI, 3G-SDI Number of transmitters 2 IR Modulation frequency Dual frequency (38 kHz, 455 kHz) Wavelength (peak intensity) 950 nm Range Min 35 m Wired Keypad Wire connection (option) 3 pin XLR Max cable length 30 m XLR Connections Optional boot for remote with XLR connector built-in to avoid requirement to use phono-to-XLR adaptor cable
7-10M Series User Manual020-100009-07 Rev. 1 (07-2012) Section 7: Specifications 7.5.2 Control Receiver 7.5.3 RS-232 7.5.4 RS-422 7.5.5 Ethernet 7.5.6 GPIO 7.5.7 Built-In Keypad and Display 7.5.8 AMX/Crestron Support Number of sensors 1 front, 1 rear Coverage 130 degrees coverage in-line with lens at 3 m distance Modulation (carrier) frequency Dual frequency (38 kHz, 455 kHz) Number of ports 2 Connector 1 female 9-pin Dsub (IN) 1 male 9-pin Dsub (OUT) Max bit rate 115.2 kbps Flow control Xon/Xoff Number of ports 1 Connector 1 female 9-pin Dsub Max bit rate 115.2 kbps Power output 12 V ±5% @ 400 mA max. Number of ports 1 Standard 10/100 Base-T Connector Female RJ-45 Number of I/O Lines 7 Connector Male 9-pin Dsub Output sink current (logic low) 100 mA @ 1V typical Power output 12 V ±5% @ 400mA maximum Key type Soft-touch keys Display type Graphics LCD backlight AMX Device Discovery Partner Crestron Integrated Partner
Section 7: Specifications M Series User Manual7-11020-100009-07 Rev. 1 (07-2012) 7.6 Power Requirements 7.6.1 Lamp Specification Rated voltage 100 VAC – 240 VAC Rated Current (dual lamp operation) 450W 1080p / SXGA+ / WUXGA 15 A @ 100 VAC 370W 1080p / SXGA+ / WUXGA / WXGA 12 A @ 100 VAC 200W 1080p / SXGA+ / WUXGA / WXGA 9 A @ 100 VAC Line frequency 50/60 Hz AC Input Coupler 15 A, 250 VAC Type of connector IEC 320-C14 with wire cable clamp Line Cord 14AWG type FT1 with plug, NEMA 5-15P, 15A Inrush Current 60 A max Maximum Power Consumption Dual Lamp 1080p / SXGA+ / WUXGA 1500W (dual lamp) / 750W (single lamp) 1080p / SXGA+ / WUXGA / WXGA 1320W (dual lamp) / 831W (single lamp) 1080p / SXGA+ / WUXGA / WXGA 1267W (dual lamp) / 805W (single lamp) 1080p / SXGA+ / WUXGA / WXGA 1135W (dual lamp) / 739W (single lamp) 1080p / SXGA+ / WUXGA / WXGA 871W (dual lamp) / 607W (single lamp) 1080p / SXGA+ / WUXGA / WXGA 739W (dual lamp) / 541W (single lamp) Type Mercury Lamp (Hg) Power 450W HD / SX+ / WU 360W min, 462W max (software adjustable) 350W HD / SX+ / WU / WX 300W min, 370W max (software adjustable) 200W HD / SX+ / WU / WX 150W min, 200W max (software adjustable) DLV Models (HD/SX+) 150W only, (not software adjustable) 450W Lamp rated lamp life to 50% brightness 1250 hrs typical @ 462W 1500 hrs typical @ 360W 350W Lamp rated lamp life to 50% brightness 1300 hrs typical @ 370W 1500 hrs typical @ 350W 2000 hrs typical @ 300W 200W Lamp rated lamp life to 50% brightness 2000 hrs typical @ 200W 3000 hrs typical @ 150W Warm-up time (to full output) 5 minutes max Operating position ±20 degrees max tilt of lamp axis from horizontal
7-12M Series User Manual020-100009-07 Rev. 1 (07-2012) Section 7: Specifications 7.7 Physical Specifications 7.7.1 Size 7.7.2 Adjustment 7.7.3 Weight 7.7.4 Operating Position 7.8 Reliability and Serviceability 7.8.1 Reliability 7.8.2 Serviceability Maximum product dimensions (L x W x H) (with lens removed)561 x 500 x 247 (mm) 22.1 x 19.7 x 9.75 (inches) Maximum shipping dimensions (L x W x H) 775 x 698.5 x 584 (mm) 30.5 x 27.5 x 23 (inches) Product Alignment 2 inches of vertical adjustment on 2 front feet 1 inch of vertical adjustment on single rear foot Maximum product weight (with lens removed) 25 kg (55 lb.) Maximum shipping weight (includes packaging) 40 kg (87 lb.) Horizontal ±20 degrees allowable rotation about lens axis Inverted ±20 degrees allowable rotation about lens axis Rotation ±180 degrees perpendicular to lens axis MTBF – excluding consumable components 15,000 hrs Consumable components Air filters, fans, lamps Time to replace any option card 1 minute Time to replace lamp 1 minute Time to replace projection lens 30 seconds Time to replace air filter 1 minute
Section 7: Specifications M Series User Manual7-13020-100009-07 Rev. 1 (07-2012) 7.9 Environment 7.9.1 Temperature/Humidity/Altitude 7.10 Accessories and Service Components Operating temperature range 5 to 40ºC (41 to 104ºF) Storage temperature range -40 to 70ºC Humidity range 10% to 80%, non condensing Operating Altitude 10,000 ft. maximum PRODUCT NAMEPART NUMBERSOLD WITH PRODUCTSOLD SEPARATELY Standard Image Processor 108-315101-XX Dual Image Processor 108-316101-XX Analog Input 108-309101-XX Dual Link DVI Input 108-312101-XX Video Decoder Input 108-310101-XX Dual 3G/HD/SD-SDI Input 108-313101-XX Twin HDMI Input 108-311101-XX DMX512 Interface 108-314101-XX Air Filter Dust 118-100104-XX Air Filter Fog 118-100105-XX Stacking Frame 118-100107-XX Ceiling Mount 118-100108-XX Lens ILS 0.73:1SX+/0.67:1HD 118-100110-XX Lens ILS 1.25-1.6SX+/1.16-1.49HD 118-100111-XX Lens ILS 1.5-2.0SX+/1.4-1.8HD 118-100112-XX Lens ILS 2.0-2.8SX+/1.8-2.6HD 118-100113-XX Lens ILS 2.8-4.5SX+/2.6-4.1HD 118-100114-XX Lens ILS 4.5-7.5SX+/4.1-6.9HD 118-100115-XX Lens ILS 7.5-11.2SX+/6.9-10.4HD 118-100116-XX Lens ILS 1.2SX+/1.1HD 118-100117-XX Lens ILS 1.2SX+/1.1HD 118-101103-XX Portrait Adapter 118-116109-XX Module IR Keypad w/Laser 002-100005-XX HARN Wired Keypad External 001-100704-XX User Manual 020-100009-XX Service Manual 020-100010-XX AutoSTACK 108-308101-XX
7-14M Series User Manual020-100009-07 Rev. 1 (07-2012) Section 7: Specifications 7.11 Regulatory 7.11.1Safety • CAN/CSA C22.2 No. 60950-1-07 2nd Edition • UL 60950-1, 2nd Edition • IEC 60950-1:2005, 2nd Edition • EN60950:2006 + A11:2009 7.11.2Electro-Magnetic Compatibility Emissions • FCC CFR47, Part 15, Subpart B, Class A - Unintentional Radiators • CISPR 22/EN55022 Class A - Information Technology Equipment Immunity • CISPR 24/EN55024 Class A - Information Technology Equipment 7.11.3Environmental The product must conform to: • EU Directive (2002/95/EC) on the restriction of the use of certain hazardous substances (RoHS) in electrical and electronic equipment and the applicable official amendment(s). • EU Regulation (EC) No. 1907/2006 on the registration, evaluation, authorization and restriction of chemicals (REACH) and the applicable official amendments. • EU Directive (2002/96/EC) on waste and electrical and electronic equipment (WEEE) and the applicable official amendment(s). • China Ministry of Information Industry Order No.39 (02/2006) on the control of pollution caused by elec- tronic information products, the hazardous substances concentration limits (SJ/T11363-2006), and the appli- cable product marking requirement (SJ/T11364-2006). 7.11.4Marking This product shall conform to all relevant Canadian, US, and European directives, standards, safety, health and environmental concerns and bare the following markings at product launch: •UL •CE • RoHS • WEEE • Future International Certifications to include: CCC, KC, PSE, c-tick, Gost-R, South Africa, and Saudi Arabia International packaging recycling mark requirements: • EU Directive (2002/96/EC) on waste and electrical and electronic equipment (WEEE); • EU Directive (94/62/EC) on packaging and packaging waste; • China packaging recycling mark standard (GB18455-2001).
M Series User ManualA-1020-100009-07 Rev. 1 (07-2012) Appendix A: Menu Tree A.1 M Series Menu Tree