Projector Christie Roadster Hd14k M User Manual

Section 3: Operation
M Series User Manual3-9020-100009-07 Rev. 1 (07-2012)
Exit
Press E
XIT to return to the previous level, such as the previous menu. 
NOTE: E
XIT does not save changes within text editing boxes (including number editing of a slide bar value) or 
within pull-down lists. In these cases, E
XIT acts as a “cancel”.
Arrow Keys 
Use the L
EFT/RIGHT ARROW KEY to change a slide bar value or to select a different option within a pull-down 
list without having to first scroll through options or...

3-10M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 3: Operation
With a function menu displayed, enter a menu option number for any numbered option, or use the UP/DOWN 
ARROW KEY to highlight the desired option and then press ENTER. Long menus have a scroll bar on the right; 
use the arrow keys to access the remainder of the menu. Locked items or items that do not pertain to the current 
action or condition appear dimmed and cannot be selected.
When finished with a function menu:
• Press E
XIT...

Section 3: Operation
M Series User Manual3-11020-100009-07 Rev. 1 (07-2012)
Slide Bars In Menus: The current value for a given parameter, 
such as size or vertical stretch, appears to the left of its slide bar 
icon (adjustment window). This number often expresses a 
percentage, or it may have units associated with it (such as 
pixels), depending on the specific option. Press L
EFT/RIGHT ARROW KEY to gradually adjust the setting up or 
down; both the number and the length of the bar change accordingly....

3-12M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 3: Operation
3.2.5 Edit Text
Activate the Edit Window: To enter or edit text, highlight the desired parameter (such as a channel name) and 
press E
NTER to activate its adjacent edit window. Any previously entered text is displayed with its first 
character highlighted in a square cursor, signifying that this character is ready for editing.
Navigate Within the Edit Window: Press R
IGHT ARROW KEY to move the cursor forward or LEFT ARROW 
KEY...

Section 3: Operation
M Series User Manual3-13020-100009-07 Rev. 1 (07-2012)
3.3 Using Inputs and Channels
The projector stores and recalls up to 99 different channels (source setups) for a variety of inputs. This memory 
feature allows you to define and use a variety of customized setups. Depending on what you have defined, each 
physical source connection (i.e., input at the projector) can have several different channels associated with it.
NOTE: See Section 2 Installation and Setup, for a full...

3-14M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 3: Operation
• If you used the source once before and changed a display parameter, such as contrast, V-Position, etc., then a 
channel was automatically created and still exists in projector memory (see CHANNEL below). Using one of 
the input or slot keys will automatically recall this channel, all its setup parameters, and update the display 
accordingly.
• If more than one channel exists for the input, the image will be displayed according...

Section 3: Operation
M Series User Manual3-15020-100009-07 Rev. 1 (07-2012)
3.3.4 Channel Setup Menu
All available channels are listed in the Channel Setup menu, which describes how each channel can be 
accessed and provides access for editing, copying and deleting channels.
Press M
ENU from the presentation level to display the Main menu. To display the Channel Setup menu, press 
3, or move the highlight to the Channel Setup option and press E
NTER. The Channel Setup menu will appear.
The channel setup...

3-16M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 3: Operation
To Copy A Channel: Highlight the desired channel in the Channel Setup menu, then press ENTER to go to the 
Select Channel Operation submenu. Select “Copy” and press E
NTER; a new channel will be created. It is 
identical to original, which still remains, but it is identified with the next available number from 01-99. If you 
change your mind and do not want to copy the current channel, press E
XIT to cancel and return to the...

Section 3: Operation
M Series User Manual3-17020-100009-07 Rev. 1 (07-2012)
To Edit A Channel: Press MENU from the presentation level to display the Main menu. To display the 
Channel Setup menu, press 3 or move the highlight to the Channel Setup option and press E
NTER. The 
Channel Setup menu will appear.
1. To edit parameters shown in the Channel Setup menu, select the relevant channel and press E
NTER. The 
Channel Edit menu will appear similar to the sample shown below.
2. If desired, review and/or...

3-18M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 3: Operation
3.4 Adjusting the Image
The most commonly used options for image adjustments are accessed through two menus: Size and Position 
(M
ENU 1) and Image Settings (MENU 2), both of which appear in the Main menu. From either of these two 
menus, you can change settings affecting the image from the current channel by working with the appropriate 
slide bars, check boxes and pull-down lists. E
XIT will return to the previous menu (or to...