Projector Christie Roadster Hd14k M User Manual

Section 3: Operation
M Series User Manual3-59020-100009-07 Rev. 1 (07-2012)
3.12 Remote Control of the Projector
As an alternative to using a keypad, most projector functions can be controlled remotely, typically at a 
controller such as a PC, via a web interface.
•Via ASCII Messaging: Connect a serial link between your controller and the RS-232 or RS-422 port 
(recommended), or open an Ethernet socket (i.e., Telnet) between your controller and the valid projector 
address. Valid ASCII codes and messages...

M Series User Manual4-1020-100009-07 Rev. 1 (07-2012)
4 Web User Interface
4.1 Logging On
IMPORTANT!Before logging on to the system, ensure that you select the appropriate language required. 
Your language selection only affects the web user interface. The language used by the 
projector’s on-screen display (OSD) is not affected. 
1. Open your web browser and type the IP address (in the address bar) assigned to your projector.
2. Select the appropriate language from the Language drop-down list, located...

4-2M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 4: Web User Interface
The following table describes each area found in the Main window.
4.2 Navigate the Web User Interface
It is not recommended that you use the web browser navigation functionality (i.e. the Back and Forward 
functions) as this will cause you to lose your web connection. It is recommended that you navigate using the 
application interface and related functionality detailed in this section.
IMPORTANT: Internet Explorer V6.0...

Section 4: Web User Interface
M Series User Manual4-3020-100009-07 Rev. 1 (07-2012)
4.2.2 Basic Operation
This section discusses the primary tabs located along the top of the application window. Each primary tab also 
has related secondary tabs which are located along the bottom of each tabbed page as follows:
4.2.3 Main Tabbed Page - General
Under the Main tabbed page, select the General secondary tab to view general information about Inputs, 
Channels, Projector Information, Test Pattern, and Color...

4-4M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 4: Web User Interface
4.2.5 Main Tabbed Page - Lens 
Under the Main tabbed page, select the Lens secondary tab to define your adjustment settings for the lens. 
For detailed information, see Section 3 Operation.
4.2.6 Tools Tabbed Page - Virtual OSD 
Under the Tools tabbed page, select the Virtual OSD secondary tab to access to the virtual OSD page.
 The following table describes each area found in the Tools window.
AVirtual OSD tabbed page...

Section 4: Web User Interface
M Series User Manual4-5020-100009-07 Rev. 1 (07-2012)
Virtual OSD Menu
By selecting an option from a menu, its associated window 
appears, showing related information and input fields. To 
return to the previous menu, click the menu title bar (see 
Figure 4-1). 
To return to a previous menu, click on the current menu’s title 
bar or press ESC. 
NOTE:
 It is recommended to click the Maximize button to 
view the full screen size.
There are various types of menu elements...

4-6M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 4: Web User Interface
Selecting a Option From a Drop-Down List
1. Click the option drop-down arrow to open the drop-down list. 
2. Locate and select the desired option.
FIGURE 4-3 TYPES OF MENU ELEMENTS
Selecting or Clearing a Check box
To select or clear a check box, click the check box with your mouse pointer. This enables or clears the option 
respectively.
Clock Setting
1. Click within the field (i.e. Lamp Regeneration Start Time option)...

Section 4: Web User Interface
M Series User Manual4-7020-100009-07 Rev. 1 (07-2012)
The following table describes each area found in the Admin window.
Upload a Logo File or Gamma File
IMPORTANT: The projector must be powered on to enable the Upload drop-down list.
1. Click the Upload Browse button to open the Choose file window. 
2. Locate and select the file you wish to upload from a Network drive location or from your hard drive. 
3. Select the file type (Logo or Gamma) from the Upload drop-down list....

4-8M Series User Manual020-100009-07 Rev. 1 (07-2012)
Section 4: Web User Interface
Create a Backup File
1. Select a file type (All, Preferences, Configuration, Channels, or Users) from the Backup drop-down list.
2. Click Backup to initiate the download. A backup in progress bar appears. Once finished, a file download 
window appears.
3. Click Save to open a Save As window.
4. Locate and select a folder within your Network drive or hard-drive where you wish to save the file.
5. Click Save. 
Restore a...