Projectiondesign Evo2sx+ Projector User Manual

english
21

IMAGE CALIBRATION AND CORRECTION
Some  applications  require  very  precise  color  reproduction  of  the  images.  In  addition, depending  on  application,  different  color  standards  are  applied.  When  preparing  for correct color reproduction, both the source and the projector must be considered. 
The  projector  offers  several  ways  to  calibrate  colors,  as  well  as  correction  of  the  input signal. 
The  source  may  need  correction  because  it  is  usually  not...

english
22

The menu system gives access to a multitude of image and system controls. The menu system is structured through a top menu and several sub menus. The sub menus may vary  depending  on  the  actual  source  selected.  Some  functions  are  not  available  with some sources.
When  accessing  the  menu  system,  you  will  enter  at  the  position  you  left  last  time  you were using the menu system.
Press  the  MENU  key  and  navigate  using  the  arrow  keys  on  the  keypad  or  the...

english
2

PICTURE SUB MENU
brightnessAdjusts  the  image  brightness.  A  higher  setting  will  increase  the  brightness,  a  lower setting will decrease the brightness of the image.
contrastControls the contrast of the image. A higher setting will yield a ‘harder’ image with larger difference  between  shades,  while  a  low  setting  will  produce  a  ‘softer’  image  with  less difference between shades. 
colorAdjusts  the  color  saturation.  A  higher  setting  will  produce  stronger...

english
2

DYNAMIC SUB MENU
white boostIncreases the white level of the image for enhanced contrast
gammaThe  source  image  is  adapted  to  characteristics  typical  to  certain  applications.  This enables an optimized display of images, dependingon whether the source is video, computer etc.
DVI setupEnables an expanded dynamic range when using DVI.
digital noise reductionReduce noise in video images from unstable sources, cabling or material.
DNR modeSwitch DNR (digital noise reduction) off,...

english
2

ADVANCED SUB MENU
h positionShifts the image sideways.
v positionShifts the image up and down.
phaseAdjust for stable image. A jittery image may appear with certain VGA sources. You may also press the AUTO button on the keypad or remote control to optimize.frequencyAdjust  image  width.  An  incorrect  setting  may  produce  vertical,  unstable  bands  in the  image,  and  parts  of  the  image  may  not  be  displayed  on  screen.  Push  the  AUTO button to find a correct setting, or...

english
2

ADVANCED SUB MENU
color managementThe color temperature and color coordinates can be calibrated as desired.
modeSelect not corrected, temperature or custom color. The not corrected setting displays the native color temeperature of the projector.
temperatureSelect color temperature in steps of 100 Kelvin from 3200 – 9200 K along the ‘black body curve’ of the CIE color chart. 
custom color Allows user control of the color temperature by way of either adjustments in the RGB domain or x,y...

english
2

SET UP SUB MENU
keystone VAdjust  vertical  keystone  correction.  Compensates  for  the  geometrical  distortion  of  the projected image resulting from tilting the projector to shoot higher up on the wall.
keystone HAdjust horizontal keystone correction. Compensates for the geometrical distortion of the projected image resulting from shooting the image at an angle sideways to the screen.
DPMSActivate/deactivate DPMS (Display Power Management Signalling). When DPMS is on, the  projector...

english
2

UTILITIES SUB MENU
system informationDisplays information about the source and projector status.
OSDTurn the On Screen Display on (display) or off (hide) during source scan.
OSD timeoutDefines  how  long  OSD  is  displayed  after  last  key  action  before  it  disappears  from  the screen.
OSD backgroundSelect background mode, whether transparent or opaque.
factory resetResets the projector to its basic settings. All parameters available in the various menus are reset to their factory...

english
2

MISC SUB MENU
audio optionsAdjust the volume or mute the built-in monitor speaker.
configure timerThe  projector  has  a  built-in  real  time  clock  that  can  be  used  to  time  the  operation  of the unit. Use up and down arrow keys to adjust value. Use left and right arrow keys to move between fields.
program number10  programs  are  available  to  time  the  projector.  Multiple  programs  (up  to  10)  can  be active at the same time.
weekdaySelect individual weekday (Monday to...

english
0

NO IMAGE
No connection: Check if all connections are properly made.
Source off: Check if the equipment is powered on.
Lamp dead: The lamp may need replacement. Check the LAMP TIMEin the UTILITIES sub menu.
Source hibernated: Engage the source to display and activate image.
Notebook  external  screen:  Different  notebook  PC’s  use  different  combinations  of keystrokes to enable the external graphics port.
Source scan off: Check SOURCE SCAN in the SET UP sub menu. If setting is OFF,...