Polaroid Projector Polaview 215E User Manual

40Polaview 215E LCD Projector UserÕs Guide
Getting started
3.Press MODE repeatedly to choose one of the three memory modes for 
adjustment (page 45).
4.Press Z or X to select, and then press C or V to display the item to be 
adjusted.
5.Press C or V to adjust as described below.
The setting will be displayed by numerals and a bar.
6.Press MENU once to return to the RGB ADJUST or VIDEO ADJUST 
menu, or three times to exit.
Adjustments for input 
image¥ COLOR control (Adjust color intensity level.)...

English41
Getting started
RGB sync adjustment
For V POSI, H POSI, H SIZE and PHASE adjustments, see the PC Output 
Timing Relative Value Chart on page 43. These adjustments are carried out 
automatically when the Auto Setup feature of the ProMouse software is used. See 
ÒProMouse Control FeatureÓ on page 54.
RGB input is selected (See page 33). Use the buttons on the LCD projector or 
remote control unit.
1.Press MENU to display the menu.
2.Press Z or X to select RGB SYNC MENU, and then press C or V to...

42Polaview 215E LCD Projector UserÕs Guide
Getting started
4.Press Z or X to adjust as described below.
The setting will be displayed by numerals and a bar.
5.Press MENU once to return to the RGB SYNC MENU menu, or three times 
to exit.
Adjustments for RGB 
input¥ V POSI (Vertical Position) Control
(Adjust the vertical position within the projection screen.)
Press C to move down or V to move up.
¥ H POSI (Horizontal Position) Control
(Adjust the horizontal position within the projection screen.)
Press C...

English43
Getting started
PC Output Timing Relative Value Chart
ModelVertical 
positionHorizontal 
positionHorizontal
size
IBM 640 x 350 at 70 Hz/
IBM 640 x 350 at 70 Hz-30-+30 -50-+50 -50-+90
IBM 640 x 480 at 60 Hz -30-+30 -50-+50 -50-+90
MAC II 640 x 480 -30-+30 -50-+50 -50-+90
MAC 16Ó 832 x 624 -30-+30 -50-+50 -50-+90
VESA 640 x 350 at 85 Hz/
VESA 640 x 400 at 85 Hz-30-+30 -50-+50 -50-+90
VESA 640 x 480 at 72 Hz -26-+30 -50-+50 -50-+90
VESA 640 x 480 at 75 Hz -14-+30 -50-+50 -50-+90
VESA 640 x 480 at...

44Polaview 215E LCD Projector UserÕs Guide
Getting started
Adjusting the white balance
The picture may become over-saturated with red or blue color. Also, the white 
shade may not be the desired degree of whiteness. In such cases, you can adjust the 
white balance by the following procedure.
RGB input is selected (See page 33). Use the buttons on the LCD projector or 
remote control unit.
1.Press MENU to display the menu.
2.Press Z or X to select RGB ADJUST or VIDEO ADJUST, and then press 
C or V to...

English45
Getting started
4.Press Z or X to select R LEVEL, G LEVEL OR B LEVEL for the 
COLOR (for RGB input) or SUB COLOR (for S-VIDEO/VIDEO input).
5.Press C or V to display the R, G or B LEVEL ADJUST screen.
6.Press C or V to adjust the R, G or B Level.
The setting will be displayed by numerals and a bar.
Example of adjustment: R LEVEL
Press V to strengthen the red component. 
Press C to weaken the red component. 
7.Press MENU once to return to the RGB ADJUST or VIDEO ADJUST 
menu, or three times to...

46Polaview 215E LCD Projector UserÕs Guide
Getting started
Projecting PC-Card (ATA Flash Card) data
Using this software, ÒJPEG ViewerÓ, you can save the image displayed on the PC 
screen as a JPEG Þle to a PC-Card (ATA Flash Card). If you insert the PC-Card in 
this LCD projector, you can project using the JPEG Image Playback feature.
Follow the instructions below to use this feature.
Caution: It is possible that this feature will not operate correctly with all PC Cards. 
Operating performance of the...

English47
Getting started
4.Press VOLUME + to decide FOLDER.
A list of images will be displayed.
5.Press C or V to select an image.
The selected image is encircled by a bold, blue 
frame, and the FOLDER name and number is 
displayed.
Note: PressZorX to change the selected 
FOLDER, and press VOLUME 
- to display the 
INDEX.
6.Press VOLUME + to project the selected image.
Press C orV select the images one by one.
Press V to project the next image.
Press C to project the previous image.
Note:
Press Volume -...

48Polaview 215E LCD Projector UserÕs Guide
Getting started
JPEG Viewer features
System requirements
¥ IBM PC/AT or compatible
¥ Microsoft Windows 95, Windows 98
¥ 16MB RAM or more recommended
¥ 2MB available hard disk space
¥ 3.5 inch 1.44MB ßoppy disk drive (for installation)
¥ PCMCIA Type II slot
JPEG Viewer installation
1.Turn on the PC and start up Windows 95 or 98.
2.Insert the floppy disk (JPEG Viewer software) into the ßoppy disk drive.
3.Select [RunÉ] from the Windows Start menu.
4.Type in...

English49
Getting started
Starting up the JPEG Viewer
Examples below assume the use of Windows 95.
1.Turn on the PC and start up 
Windows.
2.Insert the PC-Card (ATA 
Flash Card not supplied) into 
the PC-Card 
(a) Slot on your 
PC.
When you purchase a PC-
Card, format it as you normally 
with Windows 95 or 98 before 
use.
3.Select [Start]  [Programs] 
[JPEG Viewer]  [JPEG 
Viewer] to open the JPEG 
application.
STANDARDVOLUM
EMODE
MENUINPUTSTATUS
CODE
S-VIDEOVIDEO INL-AUDIO-RRS232CRGB INAUDIO INRGB...