Polaroid Projector Polaview 215E User Manual

 
10 
Polaview 215E LCD Projector UserÕs Guide 
Introduction 
Introduction 
LCD projector features 
High brightness and resolution 
1,440 K-pixel, 600-lumen (ANSI) offers clear images even when ambient light level 
is high. 
Compact and lightweight 
Because it is completely portable, you can give attractive presentations at any 
location by connecting the LCD projector to an external device such as a notebook 
computer. 
20 to 300 inch screen capability 
20 (0.97 m) to 300 (15.8) diagonal screen size....

 
English 
11 
Introduction 
Video board 
This LCD projector accepts input signals in all major video formats, including 
PAL, SECAM, NTSC, PAL-M, PAL-N and NTSC4.43, as well as the higher 
quality S-VIDEO signals. 
Equipped with a variety of convenient functions 
A variety of functions such as the following have been provided.
¥ A blue screen is projected when no signal is being input.
¥ Mute or freeze functions for video and audio signals can be toggled on and off.
¥ The input signal display function...

 
12 
Polaview 215E LCD Projector UserÕs Guide 
Introduction 
Contents of the LCD projector box 
Please conÞrm that the following items are packed in the LCD projector box. They 
are provided to help you use or set up your LCD projector.
¥ LCD projector
¥ Remote control unit
¥ 2 ÒAAÓ batteries
¥ 9.8 ft. UL/CSA power cord or 2.44m power cord
¥ VGA cable
¥ VGA MAC adapter
¥ PC audio cable
¥ RS-232C cable
¥ RS-232C 9-pin adapter
¥ RS-232C 25-pin adapter
¥ 3.5 ßoppy disk containing ProMouse Software for...

 
English 
13 
Introduction 
Parts list and accessories 
Remote control unit
POWER
MODEFREEZE SHUTTER
MENU INPUT
LIGHT POINTER MUTE VOLUME
STANDARDa
hn
o
p i
j
k
l
m b
c
d
e
f
g
a  FREEZE button
b  POWER button
c  MUTE button
d  MODE button
e  Adjust Z / X / C / V buttons
f  LIGHT button
g  Click 2 button
h  SHUTTER button
i  VOLUME buttons
j  INPUT button
k  MENU button
l  POINTER button
m  Mouse button
n  Transmitter
o  Click 1 button
p  Battery compartment 

 
14 
Polaview 215E LCD Projector UserÕs Guide 
Introduction 
Before using the remote control 
Load the 2 ÒAAÓ batteries into the remote control 
unit. 
1. 
Slide the lid in the direction of the arrow. 
2. 
Install 2 ÒAAÓ batteries as indicated inside the 
battery compartment. 
3. 
Replace the lid and snap it into place. 
Battery replacement caution 
Do not mix old and new batteries. (Also never mix 
alkaline with manganese batteries) 
Note: 
 Do not place the remote control 
unit upside down, otherwise...

 
English 
15 
Introduction 
LCD projector
STANDARD
VOLUME
MODE
MENUINPUTSTATUS
CODE
S-VIDEOVIDEO INL-AUDIO-RRS232CRGB INAUDIO INRGB OUTAUDIO OUT
MAIN
MAIN
OFF
ON
a
c
d
fghije
b
l
k
m
n
op
r
s
tvu
w
q
STANDARD
VOLUME MODE
MENUINPUTSTATUS
CODE
a  PC Card release button
b  PC Card slot
c  S-VIDEO input connector
d  VIDEO input connector
e  AUDIO (l/r) input connectors
f  RS-232C connector
g  RGB input connector
h  Audio input connector
i  RGB output connector
j  Audio output connector
k  Lens cap
l  AC...

 
16 
Polaview 215E LCD Projector UserÕs Guide 
Introduction 
LCD projector  back/
bottom
S-VIDEO
VIDEO IN L-AUDIO IN-R RS232C RGB IN AUDIO IN AUDIO OUTMAIN
AC INON OFF
RGB OIUT
a
b
c
e
h g
f
d
a  Remote control sensor
b  Air outlet port
c  Carrying handle
d  Adjusters
e  Lens cap holder
f  Air Þlter
g  Lamp cover screws
h  Lamp cover 

English17
Getting started
Getting started
How to use the remote control unit
You can use the remote control unit in place of the computerÕs mouse.
Note: If PC-Card or Video mode is selected as the input signal mode for the LCD 
projector, the ProMouse feature cannot be used. (This includes the Pointer, Stamp 
and Line functions.)
POINTER button: Each press will change the mouse 
cursor mode as shown below.
Mouse button: This can be used in place of the computerÕs 
mouse pointing device to move the screen...

18Polaview 215E LCD Projector UserÕs Guide
Getting started
Setting up the LCD projector
Place the LCD projector on a stable, ßat surface according to the LCD projector/
screen relative position chart on page 32.
Positioning the LCD projector
Caution: Depending on the relative position of the LCD projector and the screen, 
improper adjustments may cause picture distortion. To prevent the LCD from 
wobbling, make sure both adjusters (see below) are in Þrm contact with the support 
surface. 
Side view...

English19
Getting started
Adjusting the lens
If the LCD projector is not set up so that it is horizontal, it will not be possible to 
obtain a distortion-free picture. Turn the adjusters in either direction to make Þne 
adjustments to the level of the projector so that the projector is perfectly horizontal.
a.Use the ZOOM ring to adjust the size of the picture.
For a larger picture, turn the ring to the right. For a smaller picture, turn the 
ring to the left.
b.Use the FOCUS ring to adjust the focus of...