Plus Projector U7 137 User Manual

E-41
Menu Operation Method
6Press the MENU button and close the menu display
Closing the Menu
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL but-
ton and close the sub menu.
Press the CANCEL button again to turn off the item name
cursor.
Press the SELECT () button and select the menu
name. (Menu names cannot be selected when the item
name cursor is displayed.)
Note:
A press of the QUICK button while the menu is displayed will close the menu and...

E-42
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
*“Tint” can be adjusted only at the time of NTSC composite/S signal input.
* The color space can only be adjusted with high definition TVs.
* The “Real” setting under “Aspect” for digital RGB signals can only be adjusted when the input signal is of XGA size or smaller.
Menu Operation Method
[Example of Menu Display Items at the Time of Input Signal...

E-43
Imput
TerminalDVI RGB
DVI digitalDVI componentVIDEO
S-VIDEO
Image ViewerMenu name
Setup
Info.
Auto SourceE-51   Item Name
Reference
PageSub Menu
Item Name
Auto Power OffE-51  

Menu PositionE-51
Input Format
DVI





Video
E-52
S-Video
E-52
Presentation Timer
E-52
E-53 
Language
On Screen
Background
Startup ScreenOptionE-54  
E-54  
E-54  
E-55  
Security LockE-55  
StatusE-56  
Factory DefaultE-56  
Lamp Timer ResetE-56  

...

E-44
Image
•Perform this operation while projecting the picture for which the adjustment/setting will be made.
•Select the menu name “Image”.
See “Menu Operation Method” on Page E-37 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-42.
Brightness / Contrast / Color / Tint / Sharpness
Picture Adj. / Fine Picture / H Position / V Position
Usually, automatic...

E-45
Fine Picture
Adjust this when the picture shows a lack of color fidelity or flickering.
Select the “Fine Picture” item name and adjust with the SELECT () but-
tons so that the lack of color fidelity or the flickering disappears.
Image
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the SELECT () buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the...

E-46
Color
•Do the following operation while displaying the image you want to adjust or set.
•Select the menu name “Color”.
See “Menu Operation Method” on Page E-37 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-42.
Quick Color Adj.
Select the preset color mode.
Select the “Quick Color Adj.” item name and select the setting contents with
the SELECT ()...

E-47
Color
Color Temp.
The screen color is affected by the color of the illumination and other
extraneous light.
This function adjusts the white, which is the reference color for video
equipment, and improves the quality of color reproduction. Adjustment
can also be used to enhance skin colors.
Select the item name “Color Temp.” and select the setting contents with the
SELECT () buttons.
Low ............ Produces warm whites (reddish)
Medium ...... Produces warm whites (yellowish)
Normal ..........

E-48
White Balance
The black and white levels of the analog RGB or DVI analog input sig-
nals being projected are adjusted automatically for the computer. This
increases color reproducibility.
1 Select the item name [White Balance] and press the ENTER button.
The display will change to [Input Black Signal].
2 The screen background color of the connected personal computer
will be set to black.
3. Press the ENTER button. The display will change to [Adjusting Black]
and the black level will be adjusted.
4...

E-49
View
•Perform this operation while projecting the picture for which the adjustment/setting will be made.
•Select the menu name “View”.
See “Menu Operation Method” on Page E-37 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-42.
This function sets the horizontal and vertical picture proportions of the
input signal.
Select the item name “Aspect” and...

E-50
Vertical Flip / Horizontal Flip
This is the selection of how images are projected on the screen. Set this
when the projector is suspended from the ceiling, installed on its back,
etc.
Select the item name “Vertical Flip” or “Horizontal Flip” and select the setting
contents with the SELECT () buttons.
View
This function is used to save the keystone adjustment values.
Setting Keystone Save to on will set the previous keystone adjustment values
when projecting after the power cable has been...