Plus Projector U7 137 User Manual

							U7-132/U7-137
FREEZEMUTELASER
AUTO
TIMER RGBVIDEOR-CLICK/
CANCELQUICK MENU
ENTER
ST
ANDBY
Q
123
4VO
L
ZO
O
M
RGB IN
RGB OUT
IMPORTANT* DLP™ (Digital Light Processing) and DMD (Digital Micromirror Device) are registered trademarks of Texas Instru-
ments Incorporated (U.S.A.).
* PC/AT, VGA and XGA are trademarks or registered trademarks of International Business Machines Corporation (U.S.A.).
* S-VGA is a registered trademark of Video Electronics Standards Association.
* Microsoft, Windows, and PowerPoint are registered trademarks of Microsoft Corporation (U.S.A. and other countries).
* Macintosh is a trademark of Apple Computer Inc. (U.S.A.).
* TMDS is a trademark of Silicon Image, Inc.
Note that even in the absence of explanatory notes, serious attention is paid to the trademarks of the various companies
and to the product trademarks.
DATA PROJECTOR
U7-
13 2 / U 7-
137
User’s Manual 
						

							E-2
IMPORTANT SAFETY INFORMATION
Precautions
Please read this manual carefully before using your PLUS Data Projector and keep the manual handy for future
reference.
These operating instructions apply to both models U7-132 and U7-137.
The two models have the same display resolution and projection distance, but their CompactFlash (CF) card,
wireless LAN card and wired LAN functions differ.
For details, refer to the table below.
These instructions describe the U7-137 (full-function model).
Model Name CF card/Wireless LAN card function Wired LAN function USB memory function
U7-137



U7-132 — — —
Explanations that do not apply to both models are marked  U7-137 only .
CAUTION
TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED PLUS SERVICE PERSONNEL.
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude
to cause electric shock. Therefore, it is dangerous to make any kind of contact with any part inside
of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of
this unit has been included. Therefore, it should be read carefully in order to avoid any problems.
The above cautions are given on the bottom of the product.
WARNING
TO PREVENT FIRE OR SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE. DO NOT USE
THIS UNIT’S GROUNDED PLUG WITH AN EXTENSION CORD OR IN AN OUTLET UNLESS ALL THREE
PRONGS CAN BE FULLY INSERTED. DO NOT OPEN THE CABINET. THERE ARE HIGH-VOLTAGE COM-
PONENTS INSIDE. ALL SERVICING MUST BE DONE BY QUALIFIED PLUS SERVICE PERSONNEL.
WARNING
This is a class A product. In a domestic environment this product may cause radio interference in which case
the user may be required to take adequate measures.
RF Interference
WARNING
The Federal Communications Commission does not allow any modifications or changes to the unit EXCEPT
those specified by PLUS Vision Corp. in this manual. Failure to comply with this government regulation could
void your right to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence when the equipment is operated in a commercial environment. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference in which case the user will be required to correct the interference at his own
expense.
You are cautioned that changes or modifications not expressly approved by the party responsible for compli-
ance could void your authority to operate the equipment.
DOC Compliance Notice
This Class A digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regula-
tions.
Hg: Lamp in This Product Contains Mercury. Dispose of Lamp According to Local, State or Federal Law. 
						

							E-3
Important Safeguards
These safety instructions are to ensure the long life of the unit and to prevent fire and shock. Please read them
carefully and heed all warnings.
Installation
• For best results, use the unit in a darkened room.
• Place the unit on a flat, level surface in a dry area away from dust and moisture.
• Do not place the unit in direct sunlight, near heaters or heat radiating appliances.
• Exposure to direct sunlight, smoke or steam can harm internal components.
• Handle the unit carefully. Dropping or jarring can damage internal components.
• Do not place heavy objects on top of the unit.
Power Supply
• The unit is designed to operate on a power supply of 100 - 240 V 50/60 Hz AC. Ensure that your power supply
fits these requirements before attempting to use the unit.
• Handle the power cable carefully and avoid excessive bending. A damaged cord can cause electric shock or
fire.
• Disconnect the power cable (main’s lead) from the power outlet after using the unit.
Before disconnecting the power cable, make sure that the STANDBY indicator lights in amber (not blinking or
in green).
Cleaning
• Disconnect the power cable (main’s lead) from the unit.
• Clean the cabinet of the unit periodically with a damp cloth. If heavily soiled, use a mild detergent. Never use
strong detergents or solvents such as alcohol or thinner.
• Use a blower or lens paper to clean the lens, and be careful not to scratch or mar the lens.
• Clean the ventilation slots and speaker grills on the unit periodically using a vacuum cleaner. If accumulated
dust blocks the ventilation slots, the unit will overheat, which may cause the unit to malfunction.
Use a soft brush attachment when using the vacuum cleaner. Do not use a hard attachment, such as a crevice
tool, to prevent the damage to the unit.
Lamp Replacement
• Be sure to replace the lamp when the Status indicator comes on. If you continue to use the lamp after 2000
hours of usage, the lamp will turn off.
Fire and Shock Precautions
• Ensure that there is sufficient ventilation and that vents are unobstructed to prevent the buildup of heat inside
the unit. Allow at least 10 cm (3 inches) of space between the unit and walls.
• Prevent foreign objects such as paper clips and bits of paper from falling into the unit. Do not attempt to retrieve
any objects that fell into the unit. Do not insert any metal objects such as a wire or screwdriver into the unit. If
something should fall into the unit, immediately disconnect the power cable from the unit and have the object
removed by a qualified PLUS service person.
• Do not place any liquids on top of the unit.
CAUTION – HOT!
The area around the exhaust vents is hot during and immediately after image projection.
To avoid burns, keep your hands away from this area.
Wait until the exhaust vents area cools off before touching it.
Do not look into the lens while the unit is on. Serious damage to your eyes could result. IMPORTANT SAFETY INFORMATION 
						

							E-4
Major Features

High brightness, lightweight projector with wireless/wired network presentation and
PC-less presentation functions
The efficiency of the use of light is improved thanks to the combination of the DLP™ system and a unique optical design. The
three primary colors necessary for expressing colors (red, green and blue) are produced with a single DMD (an ultra-high
precision digital device), thereby achieving high brightness, compact size and light weight.  In addition, wireless LAN technol-
ogy is used to enable wireless presentations without connecting the projector to a computer with an RGB cable. The image
viewer function can be used for presentations of PowerPoint files containing image files and animations that have been stored
on CF memory cards or in the USB memory. 
(*1)
*1. For details, refer to the “Image Viewer / Network” manual.

Lamp replaceable without removing projector from ceiling
The lamp can be replaced from the top of the projector without removing the projector when it is mounted on the ceiling. This
eliminates the need to take the projector down to replace the lamp, then to remount the projector and make the projection
position adjustments, etc., as required with other projectors. 
(*2)
*2. For details, see “Replacing the Lamp Cartridge” on page E-61.

Sharp, clear picture
The DLP™ display system affords RGB color fidelity and inconspicuous gaps between the individual dots, thereby permitting
the display of small characters and diagrams with distinct clarity.

Advanced Color Wheel (ACW) allows for further enhancement of color reproduction
PLUS’s unique ACW preserves brightness, while allowing for superlatively enhanced color reproduction and astoundingly
clear picture quality attainable only with DLP™ technology.

High contrast ration of 2000:1
Use of a new generation of DMD devices has given birth to an amazing 2000:1 high contrast ratio.
By widening the difference of brightness between black and white, you can see a degree of sharpness that is greater than just
the brightness based on specifications.

Great moving image playback capabilities using the same principles as DLP Cinema™
technology
Plus DLP type projectors have the same makings as the DLP Cinema™ technology used in movie theaters. Because of their
extremely fast response, even images with much movement – sports, movies – play smoothly without blurring.

Security lock function
The lock can be set so that a password must be input when the projector is started up. Without the correct password, no
operations other than turning the power on and off can be performed. This function effectively protects the projector from
unauthorized use.

Powerful functions for presentations
A wide variety of easy-to-set functions have been built into the projector, from a digital keystone correction function (used
when making settings) that corrects picture distortion, to an auto adjustment function that automatically identifies the PC
signal.
There is also a built-in “Presentation Timer” function for further presentation convenience.

Beautiful reproduction of high-quality images from DVD
Faithful reproduction of color tones gives rise to the display of natural images. High-quality images such as those from DVD
and digital high-definition television broadcasts bring out the display capabilities that are an essential strength of the DLP™
display system projector.

Enable RGB output in addition to digital/analog RGB input...
by using a DVI cable to connect the projector with a personal computer equipped with a DVI connector. This will allow fully
digital pictures to be enjoyed.
Also, by using the RGB output connector, the same image can be sent to the monitor of a personal computer.

Econo-mode switch function for the lamp output
Using the lamp Econo-mode will extend the life of the lamp and lower the power consumption.
By switching the lamp mode to suit your operating environment, you will save on lamp cost as well as contribute to energy
conservation and ecology. 
						

							E-5
Table of Contents
Preparation and Background Knowledge
IMPORTANT SAFETY INFORMATION ............................................................................ E-2
Major Features .................................................................................................................E-4
Table of Contents ............................................................................................................. E-5
Checking the Supplied Accessories .............................................................................. E-7
Names of the Main Unit Parts ......................................................................................... E-9
Names of the Remote Control Parts ............................................................................ E-11
Preparing the Remote Control ...................................................................................... E-12
Inserting the Batteries ............................................................................................... E-12
Remote Control Range ............................................................................................. E-12
Setup and Projection
The Procedure Up to Projecting to the Screen ........................................................... E-13
Placement Guide
Screen Size and Projection Distance ........................................................................ E-14
Connecting Personal Computers and Video Equipment
Connections with Personal Computer ....................................................................... E-15
Personal Computers with a DVI Connector ......................................................... E-15
Personal Computers with a Mini D-Sub 15-Pin Connector ................................. E-16
To Output the External Output Signal of a Notebook Computer ......................... E-17
Connections with Composite Signals ........................................................................ E-18
Video Equipment with VIDEO Connectors .......................................................... E-18
Video Equipment with S-VIDEO Connectors ...................................................... E-18
Connections with Component Signals ....................................................................... E-19
Connections with Audio Connectors ......................................................................... E-20
Connections with the RGB OUT Connector .............................................................. E-21
Power Cable Connections and Switching the Power On/Off
Operating ................................................................................................................... E-22
Finishing .................................................................................................................... E-24
Adjustment of the Projection Screen
Adjustment of the Projection Screen ......................................................................... E-25
Making Adjustments with the Adjusters .............................................................. E-26
General Operation
Input Selection ............................................................................................................... E-27
Automatic Adjustment of Analog RGB ........................................................................ E-27
Freezing a Moving Picture ............................................................................................ E-28
Cancelling Video and Audio Temporarily ..................................................................... E-28
Adjustment of the Volume ............................................................................................. E-28
Enlargement of the Image and Video Movement ........................................................ E-29
Using the Presentation Timer ....................................................................................... E-30
Using the Laser Pointer ................................................................................................ E-31
Performing Mouse Operations on the Computer with the Remote Control Unit ..... E-32
Controlling the Projector from a Computer ................................................................. E-33
Protecting the Projector with the Security Lock ......................................................... E-34
Using the Quick Menu ................................................................................................... E-36 
						

							E-6
Table of Contents
Menu Operations
Menu Operation Method ................................................................................................ E-37
Names and Functions of Buttons Used for Menu Operations ................................... E-37
Menu Screen Names and Functions ......................................................................... E-38
Performing Menu Operations .................................................................................... E-39
Selecting Another Menu Name with Remote Control Operation ............................... E-41
List of Item Names Offering Input Selection and Adjustments/Settings .................... E-42
Adjustments and Settings
Image
Brightness / Contrast / Color / Tint / Sharpness ........................................................ E-44
Picture Adj. / Fine Picture / H Position / V Position .................................................... E-44
Reset ......................................................................................................................... E-45
Color
Quick Color Adj. ........................................................................................................ E-46
Gamma ..................................................................................................................... E-46
Color Temp. ............................................................................................................... E-47
White ......................................................................................................................... E-47
Color Space .............................................................................................................. E-47
White Balance ........................................................................................................... E-48
View
Aspect ....................................................................................................................... E-49
Filter ..........................................................................................................................E-49
Vertical Flip / Horizontal Flip ...................................................................................... E-50
Keystone .................................................................................................................... E-50
Keystone Save .......................................................................................................... E-50
Setup
Auto Source ............................................................................................................... E-51
Auto Power Off .......................................................................................................... E-51
Menu Position ............................................................................................................ E-51
Lamp Mode ............................................................................................................... E-52
Input Format .............................................................................................................. E-52
Presentation Timer .................................................................................................... E-53
Option
Language .................................................................................................................. E-54
On Screen ................................................................................................................. E-54
Background ............................................................................................................... E-54
Startup Screen .......................................................................................................... E-55
Security Lock ............................................................................................................. E-55
Network Password ..................................................................................................... E-55
Info.
Status ........................................................................................................................ E-56
Factory Default .......................................................................................................... E-56
Lamp Timer  Reset ..................................................................................................... E-56
Resolution / Frequency ............................................................................................. E-57
Lamp Timer ............................................................................................................... E-57
Miscellaneous
When an Indicator is Lit or Blinking ............................................................................ E-58
Troubleshooting ............................................................................................................. E-59
Cleaning ......................................................................................................................... E-60
Replacing the Lamp Cartridge ..................................................................................... E-61
Specifications ................................................................................................................ E-64
Table of Supported Frequencies .................................................................................. E-65
Cabinet Dimensions ...................................................................................................... E-66 
						

							E-7
Checking the Supplied Accessories
Remove the main unit and the accessories from the box and check that the following items are included.
Wireless remote control unit with laser pointer [1] /
Size AAA batteries [2]
This controls the projector. (See Page E-11.)Power cable (1.8 m / 5.9 feet) [1]
This power cable supplies power to the unit. See Page E-22
about connections.
S-Video cable (Mini DIN 4-pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has an S-video connector. Connections are described on Page
E-18.
No. 771709000
Audio cable (Mini plug, 2 m / 6.6 feet) [1]
This cable is used with equipment that has phono type audio
jacks. Connections are described on Page E-20.
No. 769710000
FR
E
EZEMUTELASER
AUTO
TIMERVOL
ZOOM
RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q
123
4
DVI/Mini D-Sub 15-pin conversion adapter (18 cm / 0.59
feet) [1]
This is used when the monitor connector of the personal com-
puter is a mini D-sub 15-pin connector. See Page E-16, 19
about connections.
No. 772708000
Audio conversion adapter (Mini plug / RCA pin plug, 15
cm / 0.5 feet) [1]
This cable is used with equipment whose audio connector is
of the phono pin type. Connections are described on Page
E-20.
No. 770704000
Video cable (RCA pin plug, 2 m / 6.6 feet) [1]
This cable is used in the connection of video equipment that
has a video connector. Connections are described on Page
E-18.
No. 771703000
RGB signal cable
(Mini D-sub 15-pin, 2 m / 6.6 feet) [1]
This is used in making connections with a personal computer.
See Page E-16 about connections.
No. 773711000 
						

							E-8
Checking the Supplied Accessories
“WARNING”
Handling the cables supplied with this product, will expose you
to lead, a chemical known to the State of California to cause
birth defects or other reproductive harm.
Wash hands after handling.
Storage case (for projector and accessories) [1]
This is a case designed for storing the projector and its acces-
sories.
Use this carrying case when storing or moving the projector.
F
R
E
E
Z
EMUTELASER
AUTO
TIMER
VOL
ZOOM RGBVIDEOR
-
C
L
I
C
K
/
C
A
N
C
E
LQUICK MENU
ENTERST
ANDBYQ1234
HOW TO PUT THE PROJECTOR INTO THE STORAGE CASEClose the lens shutter or lens cap before putting the projec-
tor in its case, then fasten the projector in place with the
Velcro belt. Store the remote control unit in the remote con-
trol unit pocket, the cable in the cable pocket.
Remote control
unit pocketCable pocket
USB cable (type A, 2 m / 6.6 feet) [1]
Used to perform mouse operations on a computer using the
projector’s remote control unit. Connections are described on
Page E-32.
No. 781807800Wireless LAN card [1] U7-137 only
User’s Manual (CD-ROM Edition) [1]
User’s Manual (Simplified Edition) [1]
Security sheet [1]
Security label [1]
When suspending from the ceiling, to prevent the terminal cover from falling, fasten the
terminal cover to the projector using the included terminal cover cord as shown on the
diagram. Terminal cover cord [2]
DVI 
						

							E-9
Names of the Main Unit Parts
Front adjuster button [E-26]
(There is also one on the right side.)Focus ring
[E-26]
Exhaust vents
Front adjusters [E-26]Rear adjuster [E-26] Lamp cover [E-62]
Ventilation slotsLens cap
Remove before use. Attach
the lens cap after use to
protect the lens.Remote control
sensor [E-12]
Lens Zoom ring [E-25]
Ventilation slots
Ventilation
slots Terminal cover
Built-in Security Slot
This security slot supports the MicroSaver Security System manufactured by
Kensington Microware Inc.
Built-in security slot
(See description below.) 
						

							E-10
Names of the Main Unit Parts
DVI
RGB OUT
RGB INUSB
PC
CONTROLMOUSE DVI AUDIO VIDEO S-VIDEO CF CARD
100 BASE-
TX
10 BASE-
T
MENU SOURCESTANDBY STATUS
AUTO
QUICK
MENU
STANDBY indicator [E-22, 58] STATUS indicator [E-22, 58]
AUTO button [E-27] Buttons used in menu and quick menu operations
[E-36, 37]
ENTER button [E-23]STANDBY button [E-22]
SOURCE button [E-27]
MENU button [E-37]SELECT (
) buttons
QUICK MENU button [E-36]
Ventilation slotsSpeaker
AC IN connector [E-22] Remote control sensor [E-12]
Ventilation slots
DVI connector [E-15, 16, 19]S-VIDEO connector [E-18] VIDEO connector [E-18] AUDIO connector [E-20]
MOUSE connector
[E-32]Used when using a CompactFlash
card or a wireless LAN card.
CF card slot
RGB OUT connector [E-21]RGB IN connector [E-15, 16] PC CONTROL connector
(DIN 9-pin) [E-33]
LAN connectorUSB connector
U7-137 only
(See pages 15 and 16 on the “Image Viewer / Network” manual)