Plus Projector U5 732 User Manual

E-41
Menu Operation Method
Menu Screen Names and Functions
Menu Name
This is the title of the menu.
There is a change to the title screen
when the menu is selected.
The cursor moves to the selected menu
name.Cursor (Deep Blue)
This permits setting/adjustment of the
item located at the cursor position.
Item Name
This is the name of the ad-
justment or setting.
 Icon: Pressing the ENTER but-
ton displays the sub menu or set-
ting contents.
Sub menu
Adjustment Bar
Adjustment Bar and Settings Contents...

E-42
Menu Operation Method
Performing Menu Operations
•Only “Setup”, “Options” and “Info.” can be selected when no signal is being input.
•The menu display will close if, after pressing a button, the next button operation is not made within 30 seconds.
•The adjustment and the setting values are stored even when the power is switched off or the plug is disconnected
from the power outlet.
(Note that some items are not stored.)
Preparation Switch on the power of the connected equipment, start the play...

E-43
3Press the  SELECT button to display the item name selection cursor.
Displaying the Cursor
This condition al-
lows selection of the
item name.
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q
Menu Operation Method
4Press the SELECT (
) button to align the cursor with the item name
Selection of the Item Name
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK MENU
ENTER
STANDBY
Q
Items for which the  Icon Is Displayed
Press the ENTER button to display the...

E-44
Menu Operation Method
6Press the MENU button and close the menu display
Closing the Menu
FREEZEMUTELASER
AUTO
TIMER RGBVIDEO
R-CLICK/
CANCEL
QUICK
ENTER
STANDBY
QMENU
Selecting Another Menu Name with Remote Control Operation
When a sub menu is displayed, press the CANCEL but-
ton and close the sub menu.
Press the CANCEL button again to turn off the item name
cursor.
Press the SELECT () button and select the menu
name.
(Menu names cannot be selected when the item name
cursor is displayed.)
Note:
A...

E-45
List of Item Names Offering Input Selection and Adjustments/Settings
The item names that can be adjusted/set will differ depending on the input signal.
“Tint” can be adjusted only at the time of NTSC composite/S signal input.
Menu Operation Method
[Example of Menu Display Items at the Time of Input Signal RGB Selection]
RGBComponent
VIDEO
S-VIDEOMenu name
Image
Color
View
BrightnessE-47  Item NameSub Menu
Item Name
ContrastE-47 

Picture Adj.
Fine PictureE-47
H Position
E-48
V Position
E-48...

E-46
RGBComponent
VIDEO
S-VIDEOMenu name
Setup
Info.
Auto SourceE-54  Item Name
Reference
PageSub Menu
Item Name
Auto Power OffE-54 


Memu Position
Lamp ModeE-55
Input Format
E-55
RGB






Video
E-56
S-Video
E-56
Presentation Timer
E-56
E-56 
Language
On Screen
Background
Startup ScreenOptionE-57 
E-57 
E-57 
E-58 
Security LockE-58 
StatusE-59 
Factory DefaultE-59 
Lamp Timer ResetE-59 


ResolutionE-60 
FrequencyE-60 
Lamp...

E-47
Image
•Perform this operation while projecting the picture for which the adjustment/setting will be made.
•Select the menu name “Image”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Page E-45.
Brightness / Contrast / Color / Tint / Sharpness
Picture qualities such as brightness and contrast will change depend-
ing...

E-48
Fine Picture
Adjust this when the picture shows a lack of color fidelity or flickering.
Select the “Fine Picture” item name and adjust with the SELECT () but-
tons so that the lack of color fidelity or the flickering disappears.
Image
H Position
Adjust this when the picture is shifted to the left or right.
Select the “H Position” item name and adjust with the SELECT () buttons.
V Position
Adjust this when the picture is shifted up or down.
Select the “V Position” item name and adjust with the...

E-49
Color
•Do the following operation while displaying the image you want to adjust or set.
•Select the menu name “Color”.
See “Menu Operation Method” on Page E-40 for information about performing menu operations. The item name display will
differ depending on the input signal. See “List of Item Names Offering Input Selection and Adjustments/Settings” on Pages
E-45.
Quick Color Adj.
Select the preset color mode.
Select the “Quick Color Adj.” item name and select the setting contents with
the SELECT ()...

E-50
Color
Color Temp.
The screen color is affected by the color of the illumination and other
extraneous light.
This function adjusts the white, which is the reference color for video
equipment, and improves the quality of color reproduction. Adjustment
can also be used to enhance skin colors.
Select the item name “Color Temp.” and select the setting contents with the
SELECT () buttons.
Low ............ Produces warm whites (reddish)
Medium ...... Produces warm whites (yellowish)
Normal ..........