Philips Projector PPX4835 User Manual

  Functions 11
5Functions
Your projector can also be used as: pocket 
flashlight, SOS light or warning light.
These functions exhaust a lot of energy, 
make sure the battery is full charged be
-
fore using. The device and its SOS light 
ca
 nnot be used as emergency beacon.
Flashlight
Use PicoPix as a flashlight.
1 S
witch the device on using the on/off on the 
side.
2 A
fter entering the initial screen, press  \340.
3 U
se the navigation keys to select  Flashlight.
4 Pr
ess  \340 to confirm.
5 Th
e...

  Maintenance 12
6 Maintenance
Battery maintenance
The capacity of the battery diminishes with 
time. To prolong the life of the battery, please 
observe the following instructions:
• Without a power supply, the device oper-
ates itself through the built-in battery. When  
the
  battery does not have sufficient capac -
ity, the device will turn off. 
• When the device is in low battery, the bat -
tery icon in the status bar turns red.
• When the device overheats after running for  
a lon
 g period of...

  Maintenance 13
Firmware update with USB 
stick
Connect the power adapter when 
applying a firmware update.
1Format a USB stick as FAT16 or FAT32 file 
system.
2 C
opy the file of latest firmware to the root 
directory of the USB stick.
3 In
sert the USB stick to the USB socket on the 
device.
4 En
ter Settings menu by pressing  \340.
5 Se
lect  Maintenance  – Firmware update  
and select  YE S.
6 A
fter around 3 minutes, the firmware update 
will be completed and the device will restart.
USB stick!...

  Maintenance 14
Troubleshooting
Power cycling
If a problem occurs that cannot be corrected 
with the instructions in this user manual (see 
also the help below), follow the steps given 
here.
1Switch the device off using the on/off switch 
on the side.
2Wait at least ten seconds.
3Switch the device on using the on/off switch 
on the side.
4If the problem cannot be solved, please con-tact our customer service or your retailer. 
ProblemsSolutions
Device turns off.• When the device is running for a long...

  Maintenance 15
Only the initial screen appears and not the im-age from the external device.• Check if the cables are connected to the right 
sockets.
• Please check that the external device is 
switched on.
Only the initial screen appears and not the im-age from the connected computer.• Check that the HDMI cable is correctly 
connect to the computer's HDMI interface.
• Check if the resolution of the computer is set 
to 1280 x 720.
• Check if the correct presentation mode is 
selected on your...

  Appendix 16
7 Appendix
Technical data
Dimensions (L×H×W) ................... 115 x 115 x 32 mm
Weight ................................................................... 342 g
Recommended Ambient ............................ 5–35 °C
Relative Humidity.....
20–80 % (non-condensing)
Video connection ............. Mini-HDMI/MHL-port
Headphone connection.............................................
...............................Stereo – jack plug: 3,5 mm
MHL output ..............................DC 5V  ,...

   17
Hereby, X-GEM SAS declares that the equip-
ment is in compliance  with Directives  2014/30/
EU, 2014/35/EU, 2009/125/EC, 2011/65/EU.
The full text of the EU declaration of conformity 
is a
 vailable at the following internet address: 
www.philips.com
Preservation of the environment as part of a 
s
 ustainable development plan is an essential 
concern of X-GEM SAS. The desire of X-GEM 
SAS is to operate systems observing the envi -
ronment. The desire of X-GEM SAS is to oper -
ate systems observing...

   18
Trademarks: The mentioned references in this 
manual are trademarks of the respective com-panies. The lack of the trademarks 

PPX 4835EN
VERSION C
PHILIPS and the PHILIPS’ Shield Emblem are registered trademarks of Koninklijke 
Philips N.V. used under license. 
This product was brought to the market by X-GEM SAS, further referred to in this 
document as X-GEM SAS, and is the manufacturer of the product.
2016