Philips Projector PPX4835 User Manual

User Manual
Register your product and get support at
www.philips.com/welcome
Pocket Projector
PPX 4835
Pico Pix 

2Philips · PPX 4835
Table of contents
Dear customer  ........................................................... 3
About this user manual  ........................................... 3
What's in the box  ...................................................... 3
1 General safety information .................. 4
Setting up the device ............................................... 4
Power supply  ............................................................. 4
Repairs...

   3
Dear customer
Thank you for purchasing our Pico Projector.
We hope you enjoy your device and its many 
fun

ctions!
About this user manual
With the installation guide on the following 
pages, you can start using your device quickly 
and easily.
Read the entire user manual carefully. Follow all 
saf

ety instructions in order to ensure proper 
operation of your device. The manufacturer 
accepts no liability if these instructions are not 
followed.
What's in the box
1  – PicoPix Projector
2  –...

4Philips PPX 4835
1 General safety information
Do not make any changes or settings that are 
not described in this user manual. Physical 
injury or damage to the device or loss of data 
can result from improper handling. Take note of 
all warning and safety notes indicated.
Setting up the device
The device is exclusively for indoor use. The 
device should be placed securely on a stable, 
flat surface. Position all cables in such a way 
that no one will stumble on them, thus avoiding 
possible injuries to...

  General safety information 5
Switch the device off using the power switch 
before removing the power supply from the 
socket.
Risk of explosion with incorrect type of 
batteries!
Do not try to replace the battery your-
self. 
There is a risk of exp
 losion if the incor-
rect battery type is used.
Turn off the device and remove it from the 
po
 wer supply before cleaning the surface. Use a 
soft, lint-free cloth. Never use liquid, gaseous or 
easily flammable cleansers (sprays, abrasives, 
polishes,...

  Overview 6
2Overview
Top of the device
1
2
3
1 –  Key
 – Go one level back in menu and 
one level back in direct ory, cance
 l a function.
2  – OK  ke
 y
\340  – Co
nfirm entry / start.
3  –
 Navigation keys
\002/\003  – Navigat
 e in menu/call up quick  
setting bar.
\300/\301  – Navigate
  in menu / Decrease  
and increase.
Side view
1  – Focus wheel to adjust image sharpness
The distance to the projection surface 
must be a minimum of 0.5 meters and a 
maximum of 5 meters. If the Pocket Pro
-...

  Overview 7
Bottom of the device
1 – Tripod socket
1
Overview of the menu func -
tions
1 After switching on your projector, press the 
\340  button to enter settings menu.
2 S
elect the desired option using the navigation 
keys  \002/\003 .
3 C
onfirm with  \340 button to enter the corre -
sponding submenu.
4 Pr
ess the  button to go one level back.
Settings 1/1
Image Settings
Sound Settings
Brightness mode
Language
Flashlight
SOS Light
Warning Light
Maintenance 

  Initial operation 8
3Initial operation
Setting up the device
Place the projector on a flat surface in front of 
the projection surface. In case you need to tilt 
the device slightly upwards (e.g.: when using a 
tripod) you can correct the distortion by using 
the built-in keystone correction.
Connect power supply / 
charge battery
Power is supplied through the power supply 
(included), one end is connected to the power 
jack on the rear side of the device, the other 
end to the AC100
~240V wall...

  Initial operation 9
Image settings
Keystone
Use \300/ buttons to correct a distorted 
image.
Projection mode
Front:  Normal projection; the device is located 
in front of the projection surface/ screen.
Rear:  Rear proje
 ction; the device is located 
behind the projection surface, the image is 
horizontal mirrored.
Ceiling:  T
he device is hanging from the ceiling in 
an upside down position; the image is rotated 
by 180 degrees.
Rear ceiling:  Th
 e device is hanging from the 
ceiling in an upside...

  Connecting other devices 10
4 Connecting other devices
Only use the supplied cable or cables that are 
available as accessories to connect the 
projector.
Connecting to devices with 
HDMI output (HDMI func-
tion)
Use the HDMI to mini HDMI cable to connect 
the projector to a computer or laptop.
DC
IN
HDMI
MHLUSB
OUT
5V 1A
1 Connect the HDMI cable to the projector's 
HDMI  socket.
2 C
onnect the cable to the mini-HDMI socket of 
the playback device.
Connecting to devices via 
USB cable (Power bank...