Philips Mcd388 User Manual
Here you can view all the pages of manual Philips Mcd388 User Manual. The Philips manuals for Home Theater System are available online for free. You can easily download all the documents as PDF.
Page 31
32 Tuner (FM) Tuning Range 87.5 - 108MHz Tuning grid 50KHz Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio43 dBf Search Selectivity >28dBf Total Harmonic Distor tion 55dB Speakers Speaker Impedance 4ohm Speaker Driver 3” Full range +5.25”subwoofer Sensitivity >82dB/m/W General information AC power 110 - 240V, ~50/60 Hz Operation Power ConsumptionMain unit: 22W; Subwoofer : 45W Standby Power Consumption67dB Aux Input 0.5V RMS 20k ohm Disc Laser Type Semiconductor Disc Diameter...
Page 32
33 Director y nesting up to a maximum • of 8 levels Number of albums/ folders: maximum • 99 Number of tracks/titles: maximum 999 • ID3 tag v2.0 or later • File name in Unicode UTF8 • (maximum length: 128 bytes) Unsupported formats: Empty albums: an empty album is an • album that does not contain MP3/ WMA fi les, and is not be shown in the display. Unsuppor ted fi le formats are skipped. • For example, Word documents (.doc) or MP3 fi les with extension .dlf are ignored and not played. AAC, WAV, PCM...
Page 33
34 A distor ted picture may appear during • progressive scan setup. The aspect ratio of the TV screen cannot be changed even though you have set the TV display format. The aspect ratio if fi xed on the loaded • DVD disc. The aspect ratio may not be changed for • some TV systems. No sound or poor sound Adjust the volume. • Disconnect the headphone. • Ensure the wireless subwoofer is • connected. Remote control does not work Before you press any function button, fi rst • select the correct source...
Page 34
35 Fully extend the FM antenna. • Connect an outdoor FM antenna instead. • Wireless connection fails. Set up wireless connection manually . • Unable to select Progressive Scan Ensure the video output mode is set to • [Pr/Cr Pb/Cb Y]. No sound on HDMI connection. You may not hear any sound if the • connected device is non-HDCP compliant or only DVI-compatible. No picture on HDMI connection. Check if the HDMI cable is faulty. Replace a • new HDMI cable. If this happens when you change the • HDMI video...