Philips Mcd388 User Manual

22
Note
The section A and B can be set only within the same •
track/title.
Search forward/backward
1  During play, press  / repeatedly to 
select a search speed.
To resume play at normal speed, press  •
OK /
.
Search by time or chapter/track 
number
1  During video/audio play, press  G OTO
until a time fi eld or chapter/track fi eld is 
displayed.
For the time fi eld, enter the play  •
position in hours, minutes and 
seconds.
For the chapter/track fi eld, enter the  •
chapter/track.
Play star ts...

23
When the image is zoomed in, you  •
can press
/// to pan through 
the image.
Slow-motion play
1  During video play, press   ( SLOW)
repeatedly to select a slow play option.
The sound is muted. »
To resume play at normal speed, press  »
OK /
.
Change the audio channel
Note
This feature is only available for VCD/DivX play.•
1  During play, press  AUDIO repeatedly to 
select an audio channel available on the 
disc:
Mono Left •
Mono Right •
Mix-Mono •
Stereo •
Select a camera angle
Note
This feature is...

24
2  Select one of the following:
a picture •
the slide show option •
the menu option •
the next/previous page (if available) •
3  Press OK /   to:
play the selected picture •
star t slide show of all pictures •
enter the menu where each remote  •
key function is explained
turn to the next/previous page (if  •
available)
Select a slide show play mode
1  During play, press  ANGLE/PROG
repeatedly to select a slide-show play 
mode.
Rotate picture
1  During play, press  / to rotate the 
picture...

25
•[Off] – Disable the screen saver.
[DIVX (R) VOD]
Display the DivX® registration code.
Tip
Enter this DivX registration code when you rent or •
purchase video from http://vod.divx.com/. The DivX 
videos rented or purchased through the DivX® VOD 
(Video On Demand) ser vice can be played only on the 
device to which it is registered.
Audio setup
On[Audio Setup Page], you can set the 
following options:
[SPDIF Setup] >[SPDIF Setup Page] >[Digital
Output]
Select audio formats suppor ted by the 
connected...

26
•[Auto] – Select audio output through 
the HDMI connection automatically.
•[Off] – Disable HDMI audio output 
(not recommended).
[HDMI SETUP] >[Resolution]
Select the HDMI video output resolution that is 
compatible with your TV display capability.
Tip
 This option is only available when the  •[HDMI] option 
is set to[Auto].
In the resolution options, “i” denotes interlace and “p” 
•
denotes progressive.
Preference setup
On[Preference Page], you can set the following 
options:
[TV Type]
Change this...

27
[Password Setup] >[Password Setup 
Page] >[Password]
You can change password here. The 
default password is 1234.
•[Change]
1) Press the numeric keys to enter ‘1234’ or 
your last set password at  [Old Password]fi eld.
2) Enter the new password at  [New 
Password]fi eld.
3) Enter the new password again at  [Confi rm 
PWD]fi eld.
4) Press OK /
 to exit the menu.
Note
If you forget the password, enter ‘1234’ before you set •
a new password.
Note
If the language you have set is not available on the disc, •...

28
Program radio stations 
manually
Note
You can program a maximum of 20 preset radio •
stations.
1  Tune to a radio station.
2 Press  ANGLE/PROG to activate 
programming.
3 Press  / to allocate a number from 
1 to 20 to this radio station, then press 
ANGLE/PROG to confi rm.
The preset number and the frequency  »
of the preset station are displayed.
4  Repeat the above steps to program other 
stations.
Note
To overwrite a programmed station, store another •
station in its place.
Tune to a preset radio...

29
Select automatic loudness control
Automatic loudness control increases the treble 
and bass effect at low volume levels (the higher 
the volume, the lower the treble and bass 
levels).
1  To turn on automatic loudness control, 
pressLOUD/DBB during play until the 
loudness icon is displayed.
To turn off automatic loudness  •
control, press  LOUD/DBB until the 
loudness icon disappears.
Select surround sound effect
DVS (Dolby Vir tual Speaker) technology 
creates a highly compelling 5.1-channel...

30
To deactivate the alarm timer, select  »
[OFF] (off) at step 6.
Set the sleep timer
1
  When the unit is turned on, press  SLEEP/
TIMER repeatedly to select a set period of 
time (in minutes).
The unit turns off automatically after  »
the set period of time.
Connect other devices
Listen to an audio player
You can listen to audio player through this unit.
1  Slide down  SLIDE OPEN.
2  Connect the audio player.
For audio players with red/white  •
audio output sockets:
Connect a red/white audio cable...

31
Connect a 3.5mm audio cable (not 
supplied) to theMP3 LINK socket 
and to the headphone socket on the 
audio player.
3  Select the MP3 Link/AUX source.
4  Star t play on the audio player.
Record to a digital recorder
You can record audio from this unit to a digital 
recorder.
1  Connect a coaxial cable (not supplied) to:
the •COAXIAL OUT socket
the digital input socket on the digital  •
recorder
2  Play audio to be recorded.
3  Begin to record on the digital recorder 
(see the digital recorder user...